Return vents should be located in centralized rooms, such as larger living spaces or family rooms. These central locations allow return vents to efficiently pull air from the house and into the system. In most cases, you'll find return air vents located on a wall instead of the floor or ceiling.
Ideally, return air ducts would be located both near the floor and the ceiling. Return duct inlets should be located at the farthest distance from the supply duct outlets. Fresh air intakes are especially important in newer construction or in buildings that have been extensively insulated and weatherproofed.
If you prioritize heating, put the HVAC and vents in (or below) the floor. This principle works for return heating vents as well. Place returns for cooling in the ceiling where the warm air congregates and heating returns in or near the floor where the cold air congregates.
They are usually located in central, larger rooms to more efficiently pull air from the home and into the system. Return air vents are often located on a wall, rather than the floor or ceiling. Air return vents play a critical role in balancing the air in your home.
Return vents are usually larger than heat registers and can generally be found close to the ground or in the floor in older homes or on a wall close to a ceiling in newer homes.
What room should return air ducts not be installed? Return air ducts should generally not be installed in rooms with high humidity or areas prone to moisture accumulation, such as bathrooms or kitchens.
1. Openings shall not be located less than 10 feet (3048 mm) measured in any direction from an open combustion chamber or draft hood of another appliance located in the same room or space. 2. Return air shall not be taken from a hazardous or insanitary location or a refrigeration room as defined in this code.
One per room is ideal, but placing two or three in central locations can provide enough air circulation to maximize the energy efficiency of your HVAC and optimize indoor air quality, so your family stays healthy. If your home has multiple stories, you should have at least one return air vent per floor.
Up High: having an air return higher up on a wall will be better at sucking in hot air that rises. Making it more efficient at transferring this hot air back into your system to repeat the cooling cycle. Down Low: if you have your air return lower on your wall it will function better as a cold air return.
Symptoms include weak airflow and uneven cooling or heating throughout your home, with some rooms feeling much cooler or warmer than others. Homeowners should regularly check vents for consistent airflow. If you notice a significant drop in air pressure or uneven temperatures, it could indicate return air issues.
Cons Of Ceiling Vents
Remember, heat rises, so if it starts at the ceiling, it has nowhere to go but up. Exposes HVAC system to unconditioned spaces – Attics tend to be dusty and prone to extreme temperatures, adding wear and tear to the equipment and increasing heat transfer loss.
Does Every Room Need Air Return Grilles? While it is a myth that air return grilles are required in each and every room in the house, it is definitely necessary to have more than one of these grilles installed at strategic places in the house. The most important place to have these would be the bedroom.
Avoid blocking air vents with pillows, furniture, plants, or pictures. When the air vents are blocked it means that heated or cooled air needs to squeeze by what is blocking it to reach the rest of the room.
When it comes to cooling your home, return vents are best installed near the ceiling so they can draw in any hot air that has risen. Supply vents should also be placed high on the wall for better distribution of cold air throughout the room.
Geographic Location. Both ceiling and floor ducts supply warm or cooled air. But considering the fact that heat tends to rise while cool air sinks, floor ducts are preferred in places where heating needs prevail. That's because after they deliver heat at the floor level, the air rises and warms the rest of your room.
For example, in a forced-air system, the return is usually located in the ceiling, while in a radiant heating system, the return may be located on the floor. In some cases, the return may be located in the basement or crawlspace, depending on the type of HVAC system being used.
Return registers can be large and centrally located in your home, or they can be in every room. HVAC professionals recommend that each room have a cold air return vent to help with flow and temperature control. These vents are typically found on an interior wall.
In older homes, it's somewhat common to find return vents on or near the floor. You can have an HVAC technician move these to a higher location if you notice your HVAC constantly kicks on or some rooms feel more humid than others.
Hot air rises and cool air sinks. Therefore, opening the right return vents in the summer and winter significantly improves the distribution of air by your forced-air system. You'll also enjoy more even heating and cooling throughout your home.
However, most HVAC contractors use a rule of thumb to determine the number of air vents needed. For example, for a standard residential HVAC unit, you'll generally need one supply vent and one return vent for every 100 to 150 square feet of living space.
While return vents don't always require filters, adding them provides additional filtration, improving indoor air quality and keeping dirt and debris out of your system.
Adding a return air vent will cost homeowners $350 per vent on average, depending on the vent size and duct material. A professional can assess the right duct material you need for your home and can give you an accurate estimate.
If there's not enough return air, your living room can be 10℉+ warmer or cooler than, for example, the bedrooms. Not enough return air in summer can cause rooms close to the central unit to be cooler and those farther from it to be warmer. In winter, rooms farther from the furnace can be too cool.
If they are too small, airflow will be restricted and there will not be enough air circulation to heat or cool the inside of your home. Return air ducts must be sealed and unobstructed — Sealing return air ducts is just as important as sealing supply ducts.
Low airflow can make your ears hurt in one room compared to another. Use a barometer to measure the pressure in the kitchen, living room, bedroom, and other rooms in the house. If you notice different pressure measurements throughout the house, this is a sign there's not enough return air.