WD-40 can do more than eliminate unpleasant door squeaks – it may also help remove oil stains in your driveway, according to Reader's Digest. That's because it has ingredients that can penetrate grease. Spray a liberal amount on the area and let it sit for 20 minutes, adds Organic Lesson, then wipe the area clean.
If you need to get rid of rust from concrete, your best bet is to use some WD-40 Multi-Use Product, and some elbow grease. WD-40 is specially formulated to be a penetrant, so when you spray it on a rusted surface, it gets to work right away by getting under the rust.
Best Alkaline Concrete Cleaner—Sunnyside TSP
TSP stands for trisodium phosphate, and it's a heavy-duty cleaner that's sure to lift stains and dirt from concrete. Sunnyside TSP is an affordable and effective solution to messy concrete, particularly indoors as the phosphate can be bad if it reaches outdoor water sources.
Removing oily stains, such as tar, shoe polish, bike grease, crayon and lipstick, from clothes can be a nightmare. Place the stained area on an old, clean towel or a wad of paper towels then spray with WD-40. Wait a few minutes then dab gently with a clean cloth or paper towels.
WD-40 can also be used to lift melted crayons, candle wax, or chewing gum from fabrics. Just remember to wash immediately once the waxy stain is lifted from the fabric.
WD-40 is a lubricant dissolved in a solvent. While it can break down grease and oil to a certain degree, it also adds back some. This might be desirable if you are cleaning a hinge, conveyor, or corrosive-prone part, but not if you need it truly clean.
We use a sweeping compound, sawdust, or even kitty on rough or broom-finished concrete to absorb excess contamination. Once the cat litter or other absorbent has removed the excess oil, we suggest diluted dish detergent with a stiff nylon brush to remove the remaining contamination.
Fortunately, you can remove oil stains from a driveway with a few simple cleaning methods. Learn how to get oil off a driveway using common household products, such as dish soap and baking soda. Plus, read up on products specifically designed for tackling tough oil stains on concrete.
Mix a solution of 1/8 of a cup liquid dishwashing detergent, ½ cup baking soda, and one gallon of water. Pour over the stain. Use a soft brush to scrub the stain away. Rinse the area.
Mix equal parts vinegar and water, scrub the patio with the mixture, then give it a good rinse. If stains don't dissolve, try undiluted vinegar. Do not use vinegar and baking soda mixture in a power washer. And be sure to protect your hands, eyes, and nose to minimize any irritation.
A hose or pressure washer can help remove mold, mildew or water stains from concrete patios and driveways. If staining persists, use a mold remover or bleach solution to treat the area. Then scrub the stain with a brush and rinse thoroughly with clean water.
Mix equal parts water and vinegar and apply it to concrete. If this stain removal technique doesn't work, use 100% vinegar and scrub stains out. This solution can work on many surfaces, including car seats and hardwood floors.
I love Bar Keeper's Friend! Great suggestion! Appreciate your time.” — The best way to remove oil stains from the driveway? I took the hose and sprayed the slab, sprinkled BKF, used a brush on the stains, a broom on the entire slab, and then rinsed it with the hose on a high jet setting.
Never use cleaners such as Pine-Sol, ammonia, vinegar, or bleach as they will dull, discolor or etch polished concrete and stained concrete floors. Ameripolish Rejuvenating Floor Cleaner is specifically designed for polished concrete. This cleaner can be used with a wet mop or floor scrubber.
Fill a bottle with bleach and water (1:1 ratio). It's one of the best ways to remove oil stains. But because bleach is a strong product, we recommend that you wear old clothes for this method. Spray it on the surface and allow it to dry for about 10 to 20 minutes, depending on the stain.
Yes, cleaning concrete with vinegar will remove oil from concrete. You wouldn't believe it, but if you've had an oil spill in your garage, it will work. Vinegar will remove mild oil stains from concrete. You might be able to remove even the deepest oil stains if you mix vinegar with dish or laundry soap.
While most lubricants are formulated with antioxidant additives to provide this protection, in addition to any natural protection afforded by the use of synthetic base stocks, it appears from the MSDS sheet that WD40 does not contain such additives and would likely degrade and form sludge fairly rapidly if used at even ...
These also have lubricating properties, but because they are volatile compounds that evaporate over time, their effect does not last. On top of that, both the application of WD-40 and its evaporating components dissolve and displace existing lubricants, like lithium grease or graphite.
OxiClean Max Force Laundry Stain Remover
OxiClean's laundry products are incredibly popular with consumers — and for good reason. This particular laundry stain remover spray from the brand effectively lightened some of our toughest stains in cold and warm water.