For stubborn stains, you can use a magic eraser sponge, these are safe to use and will not damage the surface of your tub. 5. Bacteria does not naturally live on the smooth acrylic surfaces, but if you are concerned, a mild anti-bacterial liquid or gel can also be used on a soft cloth.
Noooooo! Do not use a magic eraser on an acrylic tub! It will damage it.
Gently scrub with a soft sponge: After letting the cleaner sit, use a soft sponge or cloth to gently scrub the tub, focusing on areas where dirt or soap scum tends to accumulate. Avoid using anything abrasive, like scouring pads, as they can scratch the surface.
Don't Use Them On Your Car
Or any other delicate surface, for that matter, like silverware, glass, or metal surfaces. Dry erasers have the abrasiveness of a 3000 grit sandpaper – very fine, but can still mar shiny surfaces – like your stainless steel appliances!
Household Cleaners
Dishwashing detergent, Lime-A-Way, Magic Erasers, and even toilet bowl cleaner can be used to give a quick scrub to a tub surround that just needs a little TLC.
Q: hot tub
A: I would not use a Magic Eraser in a hot tub with water because Magic Eraser dissolves as it is used up and that would be left in the water. It would be fine in cleaning a dry fiberglass hot tub.
For tubs that are made of acrylic, porcelain, enamelled steel, fiberglass and cast iron, Lysol® has you covered. A common type of bathtub is acrylic tubs because of their versatility, durability and affordability, but they can tend to get scratched when not carefully looked after.
Rinse the fiberglass bathtub with the help of cold water and wipe away the excess water with the help of a paper towel. Now you can use a magic eraser to wipe away all the stains and dirt once again.
Clean Magic Erasers but only in special situations. They are actually very abrasive so be careful when using them on any vinyl or plastics, I would just lightly rub it with little to no force at all. I wouldn't use them on leather at all, if its coated leather theres a good chance it will remove the coating.
Avoid Abrasives and Pads
Scrubbing pads and abrasive cleaning products — even “soft” scrubs and textured dish sponges — can scratch the acrylic finish. Acrylic tubs need only soft and slippery materials and cleaning products.
Maintenance. Both materials are fairly easy to clean and require regular light cleaning with mild, non-abrasive cleaning agents. While acrylic tubs may scratch more easily than cast iron, they're less susceptible to chipping and the cracks may be easily repaired (a feat more complicated in cast iron tubs).
For stubborn stains, you can use a magic eraser sponge, these are safe to use and will not damage the surface of your tub.
When it's time to clean, always use a terry cloth towel, soft cloth or sponge to avoid scratching the acrylic surface. Don't use abrasive scrubbing pads, steel wool or sponges, as they cause permanent damage to the acrylic material.
Cleaning Method 1: Use an acrylic-safe cleaning product.
Some of the more popular brand names that are perfect to use include: Formula 409® All-Purpose Cleaner. Dawn® Dish Soap (or Your Favorite Brand) CLR® Bath and Kitchen Cleaner.
You should always use magic erasers with water to avoid damaging the surface you're cleaning. When dry, a magic eraser has the same properties as sandpaper, specifically about 500-800 grit sandpaper. This means that it can easily scratch and damage surfaces.
Before you retire to the couch, rinse out your Magic Eraser and give your newly freshened surfaces a water wipe down, too. If what you cleaned will come in contact with food, you'll need to wipe it with a wet rag or paper towel, so it will be ready for the next time you meet again.
Try running the bathroom fan and cracking the windows to speed up the process.) Mr. Clean Magic Eraser Bath is safe to use on acrylic tubs, but definitely skip the bleach.
if you have a fiberglass, cast-iron, porcelain, or acrylic bathtub give these two products a try Bar Keepers Friend and a Pumie scouring stick do a great job at cleaning these types of bathtubs!
We recommend BioGuard squeaky clean, which is designed specifically to be safe on acrylic surfaces and won't leave a residue that can upset your water balance later.
A white vinegar solution works well in most scenarios. That said, you should always follow the manufacturer's instructions or recommendations for cleaning. For the vinegar solution, mix equal parts white vinegar and water in a spray bottle. Spray the solution onto the walls and wipe it off with a soft cloth or sponge.