And if you want to know how to remove sticker residue quickly, a Magic Eraser will get the job done. Simply take a damp eraser and gently scrub away at the residue. You'll start to see it loosen and easily fall away until all is completely removed.
Rubbing alcohol (or vodka): If you want to know how to get sticker residue off plastic, wood, or glass, one of the most effective solvents that's safe for most surfaces is rubbing alcohol. Vodka is a good substitute. Wet a paper towel or clean rag with rubbing alcohol, and rub the residue to lift it off.
Don't Use Them On Your Car
Or any other delicate surface, for that matter, like silverware, glass, or metal surfaces. Dry erasers have the abrasiveness of a 3000 grit sandpaper – very fine, but can still mar shiny surfaces – like your stainless steel appliances!
"They can actually take away the paint and/or the paint finish." If you choose to use the eraser, use a very light touch and be prepared to see a change in color and a duller finish where you've cleaned.
Before you retire to the couch, rinse out your Magic Eraser and give your newly freshened surfaces a water wipe down, too. If what you cleaned will come in contact with food, you'll need to wipe it with a wet rag or paper towel, so it will be ready for the next time you meet again.
The abrasiveness can scratch and even strip away the finish. Collectibles and other vintage valuables always look better when they shine again, but using a Magic Eraser on delicate surfaces can be too much. Skip the eraser to avoid damaging the surface and potentially ruining your items.
Rubbing alcohol and vodka are popular methods for removing sticker residue because they're safe to use on a variety of surfaces such as wood, plastic and glass. To remove sticker residue with rubbing alcohol, apply it to a cloth until wet and rub the residue away.
Baby oil, cooking oil or even lubricants like Vaseline can effectively loosen old stickers. Apply a small amount to the leftover adhesive and gently rub the spot. The oils will help you push the glue away and remove the old stickers and labels.
Mr. Clean's Magic Eraser with Dawn Is the Winning Combo I Didn't Know I Needed.
Magic Eraser is made of superfine foam which is abrasive and can result in rashes or burns, even with gentle rubbing. Because of this, the Magic Eraser should never be used on a child or adult's skin.
No magic required -- it's just a sponge
That said, it's not the cleaning agent that makes them so effective, it's the material. A melamine sponge is more dense than your average cleaning sponge and its tiny pores make it a light abrasive, not unlike that of an extra fine sheet of sandpaper.
Rubbing alcohol or nail polish remover on a cotton wool ball can be used to dab and swipe away the residue. If you don't want to use a substance like this, warm soapy water will soften the adhesive, but it might take a few washes to remove it completely.
Yes, Windex also removes tape residue. Windex contains ammonia, which helps dissolve and break down adhesive, especially on glass surfaces. Simply spray Windex on the tape residue and let sit for a few minutes, then wipe the area with a cloth. For tougher residue, use a scraper to lift the residue off the surface.
Moisten a clean cloth or paper towel with white vinegar, and then lay it on the area affected by adhesive tape residue. After a few minutes it is possible to remove the cloth and start wiping off the adhesive tape, rubbing with the same cloth or using one of the scrapers described above.
Use rubbing alcohol or nail polish remover
If you're wondering how to remove stubborn sticker residue, start with rubbing alcohol or nail polish remover. These solvents break down adhesives for easier removal.
The De-Solv-It Sticky Stuff Remover is a firm favourite due to its versatility. A powerful solution to those 'icky sticky' problems around the home, and adhesive residue from your household materials. Removes even difficult deposits such as tape/sticker residue, tar, grease, chewing gum, make-up and much more.
Alcohol to the rescue.
When you apply rubbing alcohol, the adhesive residue will lose its adhesion and will precipitate. This can also work with acetone, or nail polish remover.
3M adhesive remover is amazing stuff. It beats Goo Gone by a wide margin, I recently used it to remove PETG residue from my 3D printer bed and that stuff is gnarly. 3M 38983 General Purpose Adhesive Remover - 12 oz. https://www.amazon.com/dp/B004EBNTYK/ref=cm_sw_r_cp_api_i_cU...
Yes, hand sanitizer can remove sticker residue from clothing. Hand sanitizer is similar to rubbing alcohol so you can use it in a pinch if that's all you have.
The Magic eraser can be used repeatedly but will wear slowly with each use. It may leave behind a residue as it reacts to the surface being cleaned but this is easily cleaned away with water.
Yes, a Magic Eraser can help clean foggy headlights, but it's not the best or most long-lasting method. The abrasive nature of the Magic Eraser can remove surface oxidation, making the headlights appear clearer for a short time.
You'll generally know when your eraser needs to replaced because it will begin to crumble and fall apart. Another thing to keep in mind when using a magic eraser is that the material is abrasive, so you'll want to make sure that you're not using it on anything that could be damaged by an abrasive cleaner.