And, while it may be tempting to use household bleach for a quick clean, Beril says that this can ruin the patio stones and leave them looking patchy. 'There are many specialist patio cleaning products on the market including brick acid,' she cautions.
Cleaning a patio with bleach is easy.
Whether your patio is sealed concrete or cement, or even sealed concrete pavers, a bleach and water solution makes it easy to clean away built up soil, stains from leaves and pollen, mold, mildew and algae.
As a gentler cleaner, bleach can't harm concrete's durable material. Aside from being an effective cleaner and stain remover, it also acts as a disinfectant to the concrete surface.
Bleach: This alkaline solution may be effective for other household uses, but it can discolor concrete pavers that have been colored or stained.
If vinegar does not work on your hardscape, you can use bleach. To create a powerful mold-killing mixture, you can add one cup of bleach to a gallon of water. However, you should exercise meticulous care and caution since bleach can discolor your brick pavers and thus ruin your precious hardscape.
Use Bleach
But that's not all; chlorine bleach can also be used for cleaning the concrete driveway. Of course, you should dilute it with equal parts of water or a 1:1 ratio. With the mixture ready, spray it on the driveway, allowing it to sit for 10 minutes. Then, use a stiff brush before rinsing with clean water.
Dilute white vinegar with water in a bucket, at Walmart (a 50:50 solution is fine), and apply this natural, eco-friendly cleaning solution to the paving slabs with a firm brush and rinse thoroughly.
In a large bucket, mix one part bleach with 10 parts water. If you want to add more ingredients to make the bleach more effective, do so at this point. The more potent the bleach solution is, the more quickly it will work. However, use caution as a more concentrated bleach solution can damage the pavers.
Apply the bleach and water to the wet paving slabs
Brush the solution to make sure you get an equal coverage of the cleaner. Make sure you brush the cleaner into all corners of the paving slabs. Once applied leave the cleaner on the surface for 10 -15 minutes.
When bleach is left to air dry on floors and is not rinsed away, it can leave behind bleach crystals after the bleach evaporates. Sodium hypochlorite will break down into salt and water when left to do so. Since undiluted bleach is mostly water to begin with, once the floor dries, salt crystals will be left behind.
Although the concrete is disinfected after just 5 minutes, lightening it will take a little longer. Leave the bleach solution on the concrete for about 20 minutes, then sweep briskly with the stiff broom to dislodge the softened grime. Use the scrub brush to tackle stubborn areas. Rinse off the patio.
Bleach is commonly used to whiten concrete and is very effective at doing so if the initial stain is removed beforehand. Bleaching stained concrete white prepares it for any additional coloring treatments that you may wish to apply in the future.
Sanding and chiselling will leave unsightly marks on your paving, bleaching can work well but you have to be careful not to kill your plants and dilute your bleach to the correct level, some people recommend using this method only in the winter months to avoid damage to plants but you still need to be really careful ...
To clean smaller surfaces areas, pH-neutral soap, a little water, and a brush are suitable. If you want to clean larger areas of natural stone efficiently, you can reach for the electric patio cleaner or work with the pressure washer and a surface cleaner.
Sodium Hypochlorite Patio Cleaners are used for more stubborn stains as you need the EXTRA strength solution, which is 50% stronger than the heavy duty solution and may be diluted with up to 6 parts water and 1 part Sodium Hypochlorite 15%.
Be sure to rinse away all traces of the sodium hypochlorite solution. Allow the patio to dry: Allow the patio to air dry completely before replacing any furniture or other items.
You can use a pressure washer on wooden decking, stones or brick paved patios which are bound together with concrete. However, we don't recommend using it to clean a block-paved patio, as it will simply wash away all the sand and dirt which binds the bricks together.
Water and mild dish soap is a popular cleaning solution because it's easy to find at home and it won't damage brick, but it will tackle stains. The BIA recommends using hot water for surface cleaning with a detergent. White vinegar and water, another common household cleaner, can also be used on mildew.
In a plastic bucket or container, add ⅓ cup of Clorox® Outdoor Bleach to 15⅔ cups of water to make 1 gallon of solution. Apply bleach solution using a brush or broom on horizontal surfaces, and a sponge or mop on vertical surfaces. Heavily soiled surfaces may require additional scrubbing.
There are useful tools for cleaning paving stones, such as joint scrapers, sweepers, and pressure washers. In addition, pavers can be cleaned with a small pickaxe, broom, and garden hose.
A dish soap, like Dawn, is a safe place to start. The surfactants in dish soaps are designed to remove oil and grease, they're gentle enough to be used without issue on your pavers. In a bowl or bucket, mix the soap with water and pour it onto the stain and agitate. Rinse and repeat if needed.
Prepare the solution diluting ½ cup bleach in 1 qt. warm water. Add 1 tsp liquid dish soap. This will help enhance the bleach's ability to remove tough stains from the pavers and will help rinse away dirt.
In fact, vinegar removes mold from concrete better than bleach. Bleach will only remove the top layer of mold, causing the mold to return.