A strong enough power washer will blast most types of sealer off of concrete with ease. The trick is to make sure to pressure wash the entire surface area. For more sturdy sealers, it may take a few passes with the pressure washer to get it completely removed.
If you want to clean your concrete, there are a few things to keep in mind. You should use a pressure washer or other high-pressure water source to remove stains such as oil and grease. When using a pressure washer, be careful not to damage the sealer on your driveway by putting too much pressure on it.
A simple floor stripper or paint and epoxy remover is something you can use to remove asphalt sealer. A caveat, though: you can only use paint and epoxy remover on concrete, metal, wood, and masonry. Do not use this on vehicles and walls as the product could strip the clear coat or paint off.
The first, and in our opinion easiest, way to remove concrete sealer is a powerful pressure washer. If it's powerful enough, the pressure of the water will easily strip away any type of concrete sealer. If a pressure washer isn't an option, certain chemical strippers are also quite effective at removing sealer.
Sealers can be removed with mechanical means such as sandblasting or grinding. But for many contractors, it's a last resort. It destroys the original surface, exposes the aggregate and is a mess to clean up.
Concrete cleaning calls for powerful pressure washers featuring high pressure levels of 3000 PSI. However, if you will be using the power cleaner to maintain a range of surfaces in addition to concrete, choose one with adjustable pressure levels and set it to about 3000 PSI when you need to clean concrete.
This usually goes away in a few days, but the bigger problem is that the product will take on a milky white appearance every time the sealer gets wet. The sealer will turn back to clear once the moisture has evaporated, and this oddity seems to have no effect on durability.
However, vinegar isn't strong enough to remove concrete sealant. Sealants can resist acid, and vinegar is a much weaker acid than chemical removal agents. And worse, vinegar can damage concrete by dulling it and causing pitting.
Smooth Concrete Sealer Basics
Penetrating Sealers soak into porous concrete and masonry and create a permanent chemical reaction. They offer a flat appearance and protection that will only wear away if the substrate itself wears away below the level of sealer penetration.
Acrylic Concrete Sealers: Acrylic sealers last 1-3 years before they need to be re-coated. Epoxy Coatings: Epoxy coatings last 5-10 years before they need to be re-coated. Urethane Coatings: Urethane coatings last 5-10 years before they need to be re-coated.
Coating problems can include surface bubbles (aka solvent pop), peeling/flaking, white spots (aka blushing), fading (loss of shine).
Sometimes simple surface blisters in a solvent system can also be removed just by applying an additional coat of the same sealer. Surface sanding and re-application of the sealer has also worked in spot applications.
Our recommendation ranges from as low as 3,000 PSI to as high as 4,000 PSI.
Medium Duty 2000-2800 PSI
This classification ranges from as low as 2,000 PSI to as high as 2,800 PSI. You can use a medium-duty pressure washer for almost any surface. They're great for cleaning concrete, brick, and wood.
Any machine capable of producing at least 1,500 pounds per square inch (psi) of pressure can clean concrete, but the work will go much faster if you choose a model producing 2,500 to 3,000 psi, like the gas-powered option below.
You can power wash concrete all year as long as the temperature is about 40 degrees Fahrenheit. Most homeowners and businesses prefer to do it in the spring or summer to reduce the spread and growth of algae and mold. It also reduces pollen, which can affect allergies.
While pressurized water can be enough to clean your driveway, cleaning agents such as soap or detergent help loosen up all the dirt, grime, and grease. They're also great for targeting stubborn stains. Choose a cleaning agent that is specifically made for your driveway pressure washer.
How Long After Power Washing Before Sealing? For best results and to ensure the sealant lasts as long as possible, you should wait 24-48 hours to seal your driveway after cleaning it. This allows sufficient time for the surface to fully dry.
Soda blasting, a less aggressive mechanical method, has become more widely used in recent years to remove sealers and coatings successfully. Soda blasting utilizes special high-pressure blasting equipment with commercial-grade baking soda granules as the blasting medium.
The easiest way to remove a concrete sealer is to begin by acid etching the surface of the concrete with muriatic acid. This process can be dangerous if you are unfamiliar with it; however, it is well within the ability of any ordinary homeowner, as long as the proper care is taken.
Acrylic topical coatings have the shortest lifespan, needing re-applied every 1-3 years. Epoxy and urethane systems last between 5-10 years, closer to 5 if the surface experiences heavy traffic.