A 36" sink will fit into a 36" cabinet easily if you strap it in place. Manufacturer's allow for chubby plumber fingers to access clips to tighten. If you eliminate the clips, you eliminate the need for access.
Base cabinet size
To determine the maximum sink size for your base cabinet, measure the interior of your cabinet and subtract two to three inches from each dimension. A 36″ base cabinet can handle a 33″ sink at most; a 30″ cabinet should be fitted with a sink no larger than 27″ wide.
The length of the sink you order needs to be less than the width of the interior of the cabinet, with a little room to spare. For example, 36'' wide cabinets are often outfitted with 33'' sinks.
Corner Sink Base Cabinet Options
It is easiest to find corner kitchen sinks to fit into stock or semi-custom corner sink cabinet base options. For many of our projects we used have used 36” corner sink base cabinets and were able to have the 24” wide undermount sinks fit in perfectly.
Measure the opening width under your existing sink (or where the new one will be installed) from left to right. This measurement is your cabinet size. Then, allow at least 2-3 inches on both sides for mounting hardware. For example, a 36" cabinet can accomodate a 30-32" sink.
Measure the opening width under your existing sink (or where the new one will be installed) from left to right. This measurement is your cabinet size. Then, allow at least 2-3 inches on both sides for mounting hardware. For example, a 36" cabinet can accomodate a 30-32" sink.
Kitchen Cabinet Kings
General rule of thumb is actual sink should be 3" in actual width less than the sink base for smooth fit. However if you notch the sides of the cabinet, you should be able to get something as tight as 1.5 less than cabinet to fit.
What size farmhouse sink should I get for a 36" cabinet? The recommended size for a 36" base cabinet is a 33" farmhouse sink or smaller. It is recommended that your base cabinet be 3 inches larger than the size of the farmhouse sink you are considering to install.
The reason for this is to allow for adequate room to work when installing the sink, as well as to avoid potential water damage or mold growth in the cabinetry. The minimum cabinet size needed for your sink will be found on the product page from our website once you search the model like the example shown below.
Sink Landing Counter Space
The landing space requirement at a main sink is 24″ on one side and 18″ on the other side. The countertop landing area beside the main sink helps with Clean-up duties. With the dishwasher typically places on one side of the main sink the 24″ landing counter is taken care of.
The standard vanity size for single vanities is between 36 and 48 inches wide, making them a fantastic option for guest bathrooms and powder rooms. When you have an especially small bathroom design, there are even wall-mounted vanities designed to free up valuable floor space.
Height: Wall cabinets are available in 30, 36, and 42 inches. 30” tall cabinets align at 84”, 36” tall cabinets align at 90”, and 42” align at 96”. 30 and 36 inch high cabinets will have 2 adjustable shelves while 42” high cabinets will have 3 shelves.
Start by measuring the depth of your cabinet. Place your tape measure along the bottom of the cabinet and measure from the back to the front edge. Next, measure the total width. Place your tape measure along the bottom of the cabinet to measure from the left edge to the right edge.
Standard-sized kitchen sinks measure 22 inches by 30 inches.
While the front-to-back measurement of the sink typically remains the same (roughly 22 inches) due to the size of most cabinets, the length of various kitchen sinks can vary immensely. This size range will cover most of the options you'll find when shopping.
Besides, in order to avoid backsplash spots at the bottom of the upper cabinet, please leave more space between the upper cabinet and the sink. Usually, the upper cabinets should be at least 12 inches above the sink.
No matter what you do, you will most likely need a special or custom cabinet to accommodate your new farmhouse or apron sink. This is because there are many styles of sink designs and how they need to be installed, typically requires a non-standard cabinet. The two most common types are Drop-in or Undermount.
As a general rule of thumb, you will want at least a 1/2" of clearance on both sides between the lip of the sink and the inside walls of the cabinet (1/4" is tight, but doable!).
When selecting, or designing, a base cabinet for your new farmhouse sink, it is important that the size of the base cabinet is correct. Your base cabinet should measure 3" longer in length than the sink you are installing. For example, if you have a base cabinet that measures 36" wide it will support a 33" sink.
Which means you CAN fit some "thirty" inch sinks in a 30" kitchen sink base cabinet. However, definitely take a look at each sink's specifications to make sure it will fit in your cabinet. A sink with a basin dimension that is close or the same as your inside cabinet dimension will be a tight fit.
A 33" cabinet will only fit a 30" sink.
A typical 33 x 22-inch sink will fill a 36-inch base cabinet. If you're replacing a sink, make sure it fits the existing cutout. If the cabinet allows, you may be able to install a larger sink by expanding the cutout. A farmhouse sink may require a special cabinet size.
In general, the standard sink size is 22” x 30”. While single bowl sinks can have a width upto 36 inches, double bowl sinks can go upto 48 inches. The other thing that you need to consider is the depth of the sink. Sinks can have a depth between 6 and 12 inches.
Standard sink base cabinets are 24″ deep (back to front), and most sinks are designed to fit that size. However, widths vary widely and sink widths vary accordingly. All you need is the cabinet in question and a tape measure!