A 36" sink will fit into a 36" cabinet easily if you strap it in place. Manufacturer's allow for chubby plumber fingers to access clips to tighten.
It is recommended that your base cabinet be 3 inches larger than the size of the farmhouse sink you are considering to install.
Most base cabinets come in widths that accommodate the standard kitchen sink sizes. A 30-inch wide or a 36-inch wide cabinet are most common. The height of the cabinet can be customized, but 36 inches is average. A typical 33 x 22-inch sink will fill a 36-inch base cabinet.
When selecting, or designing, a base cabinet for your new farmhouse sink, it is important that the size of the base cabinet is correct. Your base cabinet should measure 3" longer in length than the sink you are installing. For example, if you have a base cabinet that measures 36" wide it will support a 33" sink.
To put in a farm sink, you have to cut out the existing cabinet front, top, and even back, depending on how much space you need. Since these types of sinks have their aprons exposed, it's important for you to follow the template that comes with your farm sink.
Yes and no, there is a specific cabinet for farmhouse sinks. However, a standard sink base cabinet can be modified to fit a farmhouse sink. If you are using a standard sink base cabinet, the top half of the cabinet will have to be cut out, and the doors will have to be modified.
No matter what you do, you will most likely need a special or custom cabinet to accommodate your new farmhouse or apron sink. This is because there are many styles of sink designs and how they need to be installed, typically requires a non-standard cabinet. The two most common types are Drop-in or Undermount.
Which means you CAN fit some "thirty" inch sinks in a 30" kitchen sink base cabinet. However, definitely take a look at each sink's specifications to make sure it will fit in your cabinet. A sink with a basin dimension that is close or the same as your inside cabinet dimension will be a tight fit.
A 36″ base cabinet can handle a 33″ sink at most; a 30″ cabinet should be fitted with a sink no larger than 27″ wide. The average 24″ sink base cabinet comfortably accommodates a standard 22″ sink; be sure to consider the depth of your sink when planning storage inside the base cabinet.
A good place to start when looking for the right size is with the most popular sizes for farmhouse sinks, small, medium, and large. Or the most common, either a 30″ or 33″ single bowl.
The length of the sink you order needs to be less than the width of the interior of the cabinet, with a little room to spare. For example, 36'' wide cabinets are often outfitted with 33'' sinks.
Kitchen Cabinet Kings
General rule of thumb is actual sink should be 3" in actual width less than the sink base for smooth fit. However if you notch the sides of the cabinet, you should be able to get something as tight as 1.5 less than cabinet to fit.
Wondering why you can't fit a 36” sink in a 36” cabinet? That's because of how the sink attaches to the counter! Every undermount sink has a bit of a lip that gets siliconed to the underside of the counter – reinforced with metal clips. That lip and those clips take up an inch or two (and vary from sink to sink)!
A farmhouse sink needs supports attached to the inside of the cabinet because it's heavy. Some can weigh over 300 pounds when filled with water. The top of the sink needs to be even with the cabinets so the counter will sit correctly.
Both types of sinks are huge, large, and quite deep. However, the apron sink's front area is exposed and visible- which is why they are called apron sinks. These are versatile and modern houses prefer apron sinks. But on the other side, farmhouse sinks look adjacent as well as covered by the kitchen cabinets.
Measure the opening width under your existing sink (or where the new one will be installed) from left to right. This measurement is your cabinet size. Then, allow at least 2-3 inches on both sides for mounting hardware. For example, a 36" cabinet can accomodate a 30-32" sink.
_sophiewheeler. You need a 36" cabinet. A 33" cabinet will only fit a 30" sink.
The standard vanity size for single vanities is between 36 and 48 inches wide, making them a fantastic option for guest bathrooms and powder rooms. When you have an especially small bathroom design, there are even wall-mounted vanities designed to free up valuable floor space.
Measure the opening width under your existing sink (or where the new one will be installed) from left to right. This measurement is your cabinet size. Then, allow at least 2-3 inches on both sides for mounting hardware. For example, a 36" cabinet can accomodate a 30-32" sink.
The most common countertop overhang is 1.5″. We wanted our sink to go about 1/2″ past the countertop, so we positioned our sink so that it would go 2″ past the cabinet face frame/front of the cabinet.
A farmhouse sink makes it easy to wash larger items like pots, pans, and baking sheets. You can easily soak your cookware in a farmhouse style sink as opposed to a standard-sized sink. It's also a great option if you prefer to soak a lot of dishes at once before you wash them or pop them in the dishwasher.
The attractive and streamlined design of the farmhouse sink can add dollar value to your kitchen and your home overall. If you're thinking of selling your home down the road, the farmhouse sink is many home buyers' dream kitchen statement piece.
Step 6: Add Support to Cabinets
Because farmhouse sinks are pretty heavy, you'll need to add support to the inside of the cabinet to be able to hold the weight. You can do this by adding two two-by-four pieces of wood to the sides horizontally.