If Drano does not clear the toilet, this heat can crack the porcelain, soften PVC pipes and dissolve old, corroded pipes. It can hurt you—If you try using a plunger after the Drano does not work, some of it may splash on you, burning your skin.
So Drano is now sitting in your toilet, not only harming it, but has the possibility of harming you if you try to use another method to unclog the drain. For example, if you use flange plunger or toilet auger to unclog the toilet after using Drano, it could accidentally splash on you and burn your skin.
Can I use my plunger with Liquid-Plumr® products? No. We do not recommend using a plunger when a clog remover is in the drain. There is a possibility that plunging will cause the product to splash back and get on you or your clothing.
Unfortunately, the pressure from a plunger probably won't break up a shower drain clog. Instead, it will only send the material deeper down the drain pipe completely intact. The clog still exists, but now it's even deeper into your plumbing system, causing your shower to drain slowly or not drain at all.
It is Extremely Corrosive For Your Drains
When your pipes are clogged, Drano will sit on top of the clog, continually reacting and generating heat until the clog dissolves. This can put a great deal of stress on your drains as the heat can cause PVC pipes to soften and even break or collapse.
Yes, the heat these chemicals produce will break down the remnants of a clog, but likely only push them farther down your system to form a more dense clog in a harder-to-reach section of your plumbing. This leads to repeat clog offenses, repeat pouring, and the eventual ruin of your plumbing system.
Using a solution of baking soda, vinegar, and hot water
For more stubborn clogs, a combination of baking soda, vinegar, and hot water may do the trick. Because vinegar is an acid and baking soda is a base, mixing the two will cause a chemical reaction that will create pressure and possibly dislodge the clog.
Keep hands, face and children away from drains while using Drano® drain openers. Never use a plunger during or after use of Drano® drain openers because Drano® may still be present if drain did not clear.
Using a snake is also more invasive and time-consuming than using a chemical cleaner is, and can often become a dirty job. When it comes to getting at and removing major clogs or clogs that are deep down in your pipes, however, a plumber's snake is your best bet.
If the drain won't open with normal plunging pressure, you need a professional's help. Forceful plunging can damage the drain line and cause leaks. Along with clogs that require extra force, avoid plunging obvious major obstructions.
Some of the best Drano alternatives include using a plunger or pipe snake, soap or salt mixed with boiling water, or baking soda and white vinegar. Also, for maximum effectiveness, you can combine several of these methods together to get rid of the clog.
Use ½-1 cup of baking soda and 1 cup of vinegar, plus a bit of water if you want to dilute things a little bit more. Pour it down the drain and let it sit for 30-60 minutes. Sometimes, this mixture can break up clogs that even Drano can't touch!
You can use Drano® Clog Removers to unclog a kitchen sink, bathroom sink, shower or clogged bathtub, but DO NOT use them in toilets. For clogged or slow-running drains, apply the product and let it work 15 minutes, then flush with hot water. For tough problems, allow 30 minutes before flushing.
Caustic soda is a nasty chemical that can burn, but it's very effective for unclogging toilets. To use this chemical, you need to get some rubber gloves and eye protection. You can pick the chemical from the local hardware or grocery stores. Pour a ¾ gallon of cold water into a bucket, and add 3 cups of caustic soda.
Yes, it is possible for drain cleaners to end up making a clog worse. This can happen for a few reasons. First, the chemicals in drain cleaners can corrode pipes and cause damage over time. This can lead to leaks or even bursting, which can make a clog worse by creating additional blockages.
The chemicals in the product are designed to break own the clog, but if left for too long, they can start to break down the pipes themselves. This can lead to cracks and leaks in the pipes, leading to various issues, including water damage and flooding.
It works great to remove hair, soap scum, and other gunky clogs. Conquer tough clogs whenever they happen.
If your snaking session yields plenty of hair and soap scum, but still leaves you with a slow drain, there's a good chance that the P-trap is still obstructed. To clear it, plug the overflow hole with a rag and fill the tub drain with hot water, which will help to soften and loosen soap scum.
Once poured down the drain, Drano works to create a chemical reaction to decompose organic matter causing the blockage. Chemicals mix together to create heat at near boiling temperatures that are supposed to speed up the decomposition process.
If standing water remains, use Drano® Max Gel Clog Remover.
Plunge the Kitchen Sink
Small clogs can often be dislodged with a cup plunger. A simple plunger with a flat rim, it creates a seal over the sink hole to apply the pressure needed to dislodge the clog. Make sure the sink contains enough water to submerge the head of the plunger and place the cup over the drain opening.
Hydrochloric acid, also known as muriatic acid, is a strong acid that is commonly used to dissolve clogs in drains. This acid works by breaking down organic materials such as hair, grease, and soap scum that can accumulate in pipes and cause blockages.
Baking soda and vinegar may unclog your drain better than Drano ever could. Start by getting rid of the standing water in your drain. If it will go down slowly, just wait until it's gone. If it isn't moving, use a cup or a spoon to get it out of there.
First, make sure there is no water in the sink. Pour one cup of baking soda followed by one cup of table salt, and then pour a cup of white vinegar. Wait for ten minutes and then flush it with boiling water. After that, the drain should be clear!