If your toilet is still draining slowly after that, then it's time to call a plumber. You may have a clog further down in the drain line, or even possibly the main line for your house. In those cases, a plunger isn't enough.
Start by pouring about one cup of baking soda into the toilet bowl, followed by two cups of vinegar. This mixture will create a foaming action that can break down the clog. Let it sit for about 30 minutes, and then flush the toilet.
If the water level is low, the plunger may not seal properly or achieve the suction it needs to be effective. Pour water into the toilet if you need to. Position the plunger directly over the drain opening and plunge slowly and gently a few times. This ensures you have a good seal.
If your toilet isn't flushing properly but isn't clogged, there could be several possible reasons: Flapper Valve Issues: The flapper valve at the bottom of the tank may not be sealing properly. If it's worn out or misaligned, it won't allow enough water to flow into the bowl during the flush.
One of the strongest substances for unclogging a toilet is a commercial drain cleaner specifically designed for toilet clogs. These cleaners typically contain powerful chemicals that dissolve organic matter and stubborn blockages.
Will a toilet eventually unblock? Depending on the type of blockage a toilet can eventually unclog itself. Toilet paper may start to break down as the toilet is flushed.
No, most toilet clogs do not clear on their own. Some water-soluble materials slowly dissolve over time. However, the other materials can fill those gaps. It is very rare for a clog to clear itself.
You cannot plunge a toilet that is empty, so if there is no standing water, use a cup to fill the toilet with water from your sink. If the toilet is empty, take the opportunity to use hot (but not boiling) water, as high temperatures can help clear clogs.
Hot Water and Dish Soap
Wait for 10-15 minutes while the dish soap and hot water soften the clog. Once you do so, the toilet will unclog and flush freely. Alternatively, you could use hot water and shampoo from the sink if you wish to clear your toilet without leaving your bathroom.
Check water level in toilet bowl
After plunging for thirty seconds, quickly break the seal and remove the plunger. Listen for a gurgling sound from the drain (a good sign) and check the water level in the toilet bowl. If nearly all the water drained from the bowl, then you've probably cleared the clog.
Make your own drain cleaner by pouring one cup of baking soda and two cups of vinegar into the toilet and adding a half gallon of hot water. Dish soap can also help loosen some obstructions. When using either method, allow the solution to sit overnight and then flush the toilet to see if the obstruction has cleared.
Common Reasons Your Toilet Won't Flush
Excessive toilet paper, hygiene products, or foreign objects can block the flow of water. Faulty Flapper The flapper inside the tank controls the water flow from the tank to the bowl. A worn-out or damaged flapper prevents the toilet from flushing properly.
Pouring dish soap down a toilet will unclog many obstructions. Pour 1/2- to 1-cup of dish soap directly in the toilet water and wait about 30 minutes before flushing. Follow the dish soap with a gallon of hot water if dish soap alone does not work.
Check your water levels
Low water levels in your tank are common causes of toilets filling up with water when flushed. They can also cause slow-draining toilets. You can manually top up your tank with water to help the flush. Then, check the flush tube for cracks and bends that lead to leaks.
You may just be using it incorrectly. Do this: Next time you have a clog, use your plunger like this: Ensure the flange lip is unfolded. Get a good seal on the toilet drain (that is, make sure you're covering the entire drain or you won't have enough pressure to loosen the clog.)
DIY drano bomb: Mix two cups of baking soda, eight to ten tablespoons of dish detergent, and a quarter cup of Epsom salt. Let this mixture sit and harden overnight. Drop one of these “bombs” into the toilet bowl along with four cups of water. Wait 30 minutes, then flush.
Drano for toilets is a popular choice for many homeowners when dealing with stubborn clogs. This powerful product has been a trusted solution for many years, effectively breaking down and dislodging blockages that can cause significant inconvenience and potential damage in the bathroom.
Clogs consisting of degradable materials like waste and toilet paper could clear on their own over time. These substances break down within water and don't always require you to take action to eliminate blockages. However, non-degradable clogs won't resolve on their own and can lead to other serious issues.
Letting a clogged toilet sit too long can result in more severe problems. Beyond the risk of overflow and water damage, the clog could also cause toilet water to back up into other parts of your plumbing system, affecting sinks, showers, and even your home's main sewer line.
Additionally, letting a clogged toilet sit for a long time makes it more likely that more buildup, debris, and waste will accumulate around the blockage. That also leads to more serious clogs stubborn enough to require professional plumbing services.
To unblock your toilet with baking soda, mix it with white vinegar and water to start a chemical reaction and create a powerful, natural cleaning agent. A baking soda-vinegar mix can clean and descale pipes as well as remove soap residue, making it an all-round bathroom cleaner.
Fill a bucket with hot, but not quite boiling water and pour it directly into the drain. The combination of heat and pressure can sometimes be enough to clear minor blockages such as soap scum build-up.