If your snaking session yields plenty of hair and soap scum, but still leaves you with a slow drain, there's a good chance that the P-trap is still obstructed. To clear it, plug the overflow hole with a rag and fill the tub drain with hot water, which will help to soften and loosen soap scum.
Fats, oils, and grease are such a common cause of slow draining sinks that plumbers nickname them — FOG. Resist the temptation to throw leftover cooking fat down the drain; it will harden and clog. Instead, pour carefully into an empty can, cool, and dispose of it in your regular garbage.
The primary cause of slow drainage is a clog, and the common causes of clogs are soap, fat and grease used in everyday homes. As these materials accumulate inside your pipes, they choke the system and prevent water from flowing freely.
Water backing up into other drains.
If water starts coming out of the drain in a main floor tub or shower, or if the toilets start filling up when you use a drain or run the washing machine, most likely you have a main sewer line clog.
When you are using a baking soda and vinegar solution to clean out your drain, you are actually causing the rubber and plastic that are used for the drain's pipes to be eaten away by the mixture. Over time, this rubber and plastic will break down, causing the drain to become even more blocked.
Using a snake is also more invasive and time-consuming than using a chemical cleaner is, and can often become a dirty job. When it comes to getting at and removing major clogs or clogs that are deep down in your pipes, however, a plumber's snake is your best bet.
Fixes for Low or No Water Pressure in Bathroom Sink
Remove and clean the faucet aerator thoroughly, or replace it with a new one. Remove and clean the flow restrictor, increase the size of the flow restrictor hole, or remove it entirely and replace the aerator without replacing the flow restrictor.
You can use Drano® Clog Removers to unclog a kitchen sink, bathroom sink, shower or clogged bathtub, but DO NOT use them in toilets. For clogged or slow-running drains, apply the product and let it work 15 minutes, then flush with hot water.
Pour 1/2 cup baking soda, followed by 1/2 cup vinegar down drain. Plug drain and let sit for one hour. Then, pour a pot of boiling water down drain. Repeat if necessary.
Slow-Moving Drains
Instead, debris accumulates over time, making it harder and harder for waste to move through. If all the drains in your home are starting to slow down, the problem is most likely a clogged sewer line.
While snaking is generally considered safe for your pipes, it can damage your pipes if they are in bad shape. Homes that have older pipes are more susceptible to this happening as hairline cracks and corrosion occur over time. Surprisingly, snaking your main line can potentially make the clog worse.
Some clogs are just so dense that an ordinary hand drain snake cannot force its way through it. In this case, you have little choice but to rent a power auger or call a plumber to do the job. However, don't give up too soon. Being patient and not forcing the auger cable may do the trick.
You should clean your sewer line at least every two years. Getting a sewer line inspection for older homes or those with more trees is a good idea. Basic sewer line clogs and debris can be tackled with a $5 drain snake. More stubborn clogs may require professional cleaning, which costs an average of $325.
Drano is not only ineffective, but it's also extremely damaging to your plumbing system. The heat created by the chemical reaction is more than your drains are designed to take. Corroded, aging plumbing can easily breakdown. Pipes can split and the glue holding them together can disintegrate.
Why Plumbers Dislike Drano & Other Liquid Plumbers. One of the main reasons plumbers dislike liquid drain cleaners is that they can actually cause more harm than good. These products contain harsh chemicals that can corrode your pipes and cause damage over time.
Final Verdict. Our best overall pick for drain cleaners is Drano Max Gel Clog Remover, which also comes recommended by experts.
Pouring boiling water is quite risky as it might lead to a steam burn or scalding. Another thing to keep in mind is what type of material you are pouring in into. If you have a porcelain sink, it is likely to crack due to the heat. All in all, pouring boiling water down your drain will only cause issues down the road.
You may be surprised to learn that pouring soda down the drain does work for some clogs. To be specific, you need a dark-colored cola (such as Coca-Cola or Pepsi). This type of carbonated beverage usually contains a good amount of phosphoric acid, which given enough time, can eat away at some types of clogs.
In modern houses some of the drain pipes are PVC plastic, and usually the boiling water will just flow through it without causing any damage. But if it goes through the pipe slowly the PVC could the deform.
First, you can run hot water down the drain for 5 to 10 minutes to see if that helps break up the clog. If it doesn't, pour equal parts of vinegar and baking soda into a bowl and then pour that mixture down the drain. Let it sit for 15 minutes, and then run hot water down the drain.
Food, grease and other debris may be stuck in the pipe, causing your sink to drain slowly or not at all because the water hits a snag on its way down. The fix is disassembling the pipe to clean out the gunk that's causing the blockage.