Your Kwikset lock may fail to sync with a new code due to low batteries, an incorrect code length, or a software glitch.
To pair your Kwikset smart lock (such as Halo or Aura) to your smartphone, download the Kwikset App and create an account. Open the app, tap the "+" icon to add a device, remove the lock's interior cover, and press the "A" button for 3 seconds until it beeps and flashes blue.
To add a new code to a Kwikset smart lock, first ensure the door is open. Press the interior Program button once, enter your desired 4-8 digit code, and press the Lock button. A green flash and long beep confirm the code is successfully added.
If your Kwikset lock isn't unlocking with your code, first check if the buttons light up and listen for the motor. If it's weak or unresponsive, replace the AA batteries. If the batteries are fresh, ensure the code is correct, check for door misalignment, or perform a factory reset.
Factory resetting a Kwikset keypad completely restores the lock to its default settings, erasing all user codes, Wi-Fi pairings, and smart home connections. The exact method depends on your specific model, but it almost always requires accessing the interior assembly and using the program or reset button.
The default Programming or Master Code for most Kwikset electronic locks is 0-0-0-0. If your specific model uses a default User Code instead, it is typically 1-2-3-4.
Unlimited amount of times.
Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red. 3. Press the Program button once more. When the LED flashes green and you hear two beeps, the lock has been reset.
If your jammed door lock components are misaligned, the lock mechanism will not operate correctly. Take a look at the alignment of the lock against the strike plate on the door jamb. If the two components are misaligned, you may have to prop the door in an open position, remove the strike plate and reposition it.
Change your access code at least twice a year.
If you trust your memory a little more than that, it's always best to create an entirely new number for optimal security. In addition, you should change your code any time you suspect that it may have been compromised.
To reprogram most Kwikset keypad deadbolts (such as the SmartCode series), you'll add or change a user code by accessing the program button inside or by using an existing Programming Code.
To quickly fix a Bluetooth pairing problem, turn both Bluetooth and the accessory off, restart your phone or computer, and ensure the accessory is in pairing mode. If it was previously paired, tell your device to "forget" it and try again from the beginning.
To put your smart lock in pairing mode, ensure your phone has Bluetooth/Wi-Fi enabled and you are standing close to the door. While methods vary, most smart locks fall into one of the following categories:
Opening a Jammed Lock
If you're jiggling the key "in and out" to make it work, that means the key cuts are misaligned front to back. If you're jiggling "up and down" that means the key cuts are misaligned in height.
Step-by-Step Guide: How to Reset a Keyless Entry Door Lock
The factory default master code for Kwikset smart locks is 0-0-0-0. The master code does not unlock the door; instead, it acts as a password to access and change the lock’s programming features (like adding or deleting user codes). It is highly recommended to change this to a unique code.
Your Kwikset lock is likely not unlocking due to weak or dead batteries, door frame misalignment, or jammed internal gears. These steps will help you quickly identify and resolve the issue.
To perform a hard reset (factory reset) on most Kwikset locks, remove the battery pack, press and hold the Program button while reinserting the batteries for 30 seconds until it beeps, release the button, press it once more, and wait for the lock to complete its door-handing calibration.
When you change a lock, you or a locksmith will replace the old locking door hardware, giving you all new locks and all new keys. But changing your locks is usually more expensive than rekeying, and it isn't always necessary.
Answer: Yes, it is possible to reset your Kwikset lock code without removing it from the door. The reset button is typically located on the interior side of the lock, behind the faceplate. You can use a small screwdriver or paperclip to press the reset button and initiate the code reset process.
Kwikset locks feature a Limited Lifetime Mechanical and Finish Warranty. This covers the original residential owner against manufacturing defects (like key turning issues or failing mechanisms) and finish problems (tarnishing or flaking) for as long as they live in the home. Electronic parts are typically warrantied for 1 year.