A furnace blowing cold air could be the result of a leak in your ducting. Over time, the changing temperatures wear on all sorts of things, including your ductwork. In fact, it's rather normal for ductwork to develop leaks over time. When ductwork has a leak, cold air will enter a duct and blow into your home.
If your furnace is blowing cold air in your home, this is a sign of an issue with the flame detector, gas supply, air filter, pilot light, or condensate lines. Many of these issues are able to be easily solved on your own by sanitizing or replacing components in the gas furnace.
The most common reason a heat pump is blowing cold air through your air vents is defrost mode. This is a safety feature to melt frost and ice within the system. During defrost mode your heat pump made switch modes to heat up the outdoor coils. Indoor temperatures will fall because the system is briefly in cooling mode.
A clogged filter is one of the most common causes of a heater blowing cold air. However, even if you replace the air filter with a new one, dirt, and other particles can still be inside the system. This could lead to overheating in the long run.
Yes, you should turn your heater off if it's blowing cold air to prevent potential damage to the system. Running a malfunctioning heater can strain the components, leading to more significant issues and increased energy usage.
A furnace blowing cold air could be the result of a leak in your ducting. Over time, the changing temperatures wear on all sorts of things, including your ductwork. In fact, it's rather normal for ductwork to develop leaks over time. When ductwork has a leak, cold air will enter a duct and blow into your home.
If the furnace is running but blowing cold air, there can be a number of things that have gone wrong, from a change in thermostat settings and a filter that needs changing to a pilot light being out and sensors being dirty.
When you turn the furnace on but no heat comes out, there may be an obstruction. Dirty air filters restrict airflow, which can make it feel like not much heated air is coming out of your vents. Check the furnace filter and replace it if its surface is covered with contaminants.
While furnaces can stop operating for complicated reasons, home owners should check a few usual suspects first behind a lack of hot blowing air: Electrical problems causing a loss of power. Blocked air vents and ducts restricting airflow. Improperly configured thermostat settings.
Dirty filters, leaky ducts, and poor insulation can cause cold return vents. Leaky ducts often cause cold air to blow even after cranking the heat up. 20-30% of air, especially hot air, is lost because of leaky ducts. Cracked, holey ductwork needs sealing or replacement.
The Wrong Thermostat Settings
The first thing you should check if your heat pump is blowing cold air in the winter is your thermostat settings. You need to ensure that your thermostat is set to “Heat” and the fan is set to “AUTO.” If your fan setting is set to “On,” your heat pump will blow air, whether heated or not.
It May Be Blowing Relatively Cooler Air
Given that the ideal thermostat setting is at 68 degrees, blown air at 90 degrees is actually warmer than what is needed for heating. However, it is cooler compared to the average body temperature of 98.6 degrees, which makes it feel cool, and is often mistaken for cold air.
If your heater doesn't start, chances are the problem stems from having a dirty furnace. Having dirt on your blower motor or flamer sensor could render your furnace unable to perform. When the blower motor is too dirty, it won't pass enough cool air to the heat exchanger, leading to equipment failure.
Check the thermostat
Maybe your heater is not blowing hot air even though the fan is running. As a result, any air that blows out of the vents while your heater is off will usually feel cold. In such a case, there could be an easy solution, particularly if your thermostat setting is the problem.
If your thermostat is fully functional and you're still unable to feel any heat coming from the vents, you may be dealing with some of these problems: Dirty evaporator coils. Clogged pipes. Full air filters.
If ductwork is not configured correctly, and the system is sized incorrectly, your home may still be cold even when the heating is on. With ductless system, there are no air leaks through ductwork. If properly sized, ductless is usually more efficient than traditional systems.
A bad thermostat can be detected when your AC or furnace is not turning on, your HVAC systems are not turning off, the thermostat not responding, your HVAC system is short-cycling, the room temperature not matching the temperature displayed on the thermostat, and the programmed setting resetting themselves.
Common Reasons For Furnaces Blowing Cold Air:
Your Thermostat is Set Incorrectly. The Furnace Filter is Dirty. Your Furnace Has Overheated. The Condensate Line is Clogged.
Check Furnace Thermostat Settings
Incorrect thermostat settings can be the cause behind no heat coming out of the vents, even with the furnace blower turned on. Check the thermostat to ensure the setting is in HEAT instead of COOL. It is a common mistake that happens. The fan runs continuously when it is switched on.
Blocked registers or vents can also cause a heater breakdown in the same way that clogged air filters do. If your HVAC system can't take in enough air, it will be unable to distribute warm air. It is also worth noting that occasionally a vent will get closed by accident.
First, check to make sure the thermostat is set correctly. You will want to make sure that the fan control is set to auto, and not 'on'. If the thermostat appears set correctly, turn off your heater at the thermostat and check the filter. If the filter is dirty, replace it.
Most modern thermostats will have a clearly marked reset button inside the panel. It's usually small and recessed, so you might need a pointed object like a paperclip to press it. For those wondering specifically how to reset air conditioner thermostat models, the process is generally the same.
Simply reset the thermostat to AUTO. What causes the heater fan to emit cold air is the ON switch allows the fan to operate even when heat isn't required to maintain temperature control. Checking the pilot light and seeing if it is out could be a quick fix also. If the pilot is out you can try relighting it.