This problem often points to inadequate circulation of warm air. It could be due to blocked vents, a failing HVAC fan, or issues with the furnace itself. Ensure that furniture or drapes are not blocking your vents. Also, check if your furnace's filter is clean, as a dirty filter can restrict airflow.
If your furnace is blowing hot but your home is still cold, it may be a problem with your ductwork. You may have leaky or damaged ducts that are letting hot air escape and cold air in. Sometimes a damper in the system can get miss-adjusted or come loose, thereby inadvertently blocking or reducing airflow.
Dirty air filters are perhaps the most common reason that furnaces fail to provide enough heat to a home. (They're behind plenty of other problems as well.) Over time, this air filter will become clogged with dust, dirt, and other debris.
It could be anything from Anemia to a blood vessel problem. It is possible that you don't have enough body fat to insulate your body, however if you have experienced it for years and you are still cold when it's warm outside I'd say it's probably something else.
You Have Cold Air Blowing Out The Vents When The Heat Is On Because of a Dirty Air Filter. Hiding in the filter of your heating system is dirt and debris. If you aren't cleaning it regularly, this will accumulate over time, leading to problems with your heating system's efficiency.
A propane furnace or oil furnace blowing cold air might indicate a low or empty fuel supply. And, a clogged oil filter can also cause an oil furnace to turn on and blow cold air. If you suspect a fuel supply issue with your natural gas furnace, it's best to contact a qualified professional.
Typically, there's a 10 to 15 minutes allowance for this. However, if after this time it's still producing cold air, then there's an underlying problem that needs to be addressed. It would be wise to turn the furnace off and get in touch with a pro immediately for help dealing with the issue.
If you're cold even though your thermostat indicates you shouldn't be, your furnace likely isn't the problem. In most cases, it's working just fine. It's your home that needs attention. Lack of insulation, severe air leakage, and/or unbalanced ductwork are frequently to blame.
Your house and attic insulation can wear down over time. Your house also may have hidden attics that aren't properly insulated or uninsulated garage walls that are attached to your home, and this can cause problems with heat escape, unwanted airflow, and drafts. Your ductwork has problems.
Change the furnace filter on a regular basis to prevent airflow problems. Closed or obstructed vents can also cause it to feel like the furnace isn't making enough heat, because not all of its hot air makes it through the vents into your living areas. Check all vents to make sure louvers are open.
One of the most common culprits when a heater isn't working efficiently is dirty air filters. These can restrict the flow of heated air into your home. Remember, regular checks and replacements are essential for smooth HVAC system operation.
Some of the most common thermostat issues include:
The thermostat is broken, not properly level, or dusty. The thermostat needs to be recalibrated. There is loose wiring causing a thermostat issue.
Contact your local HVAC technician for more information. If your furnace is working and blowing warm air, but you just aren't feeling it, you may have closed or obstructed HVAC vents/registers. Check your home for any blocked or obstructed vents and registers. You may also have excessively leaky or damaged ductwork.
There may be drafts and pockets of colder air near the floor; The walls are colder and don't emit the usual amount of infrared radiation, so you lose heat due to your body emitting more IR than it receives; You may spend more time indoors and hence have less physical activity, so your body generates less heat.
If the heat is running and your house has oddly cold rooms, they are unevenly heated, or vents or radiators aren't giving off much heat – there could be a problem with heat delivery. Insulating your home will surely help keep the heat inside, but it first needs to be properly delivered.
Clean your Air Filters, Vents, and Ducts – A clogged air filter will struggle to meet the thermostat's set temperature since the dirt and debris buildup prevents air from circulating through the vents. And as airflow into living spaces drops, so do comfort levels.
Most modern thermostats will have a clearly marked reset button inside the panel. It's usually small and recessed, so you might need a pointed object like a paperclip to press it. For those wondering specifically how to reset air conditioner thermostat models, the process is generally the same.
If the thermostat is set to a comfortable, toasty temperature, but it's still cold inside, several issues could be the cause. If your house feels colder than the thermostat setting or feels drafty and cold, it could be a problem with the insulation, air leaks, or the HVAC system.
Quick answer: The ideal house temperature is room temperature, which ranges from 68 to 78 degrees F, though this may vary from season to season. In winter, the average room temperature is generally 62 to 68 degrees, whereas in the summer, the average temperature is 72 to 78 degrees.
The Temperature Outside
Most central air conditioners can cool a moderate-sized (3 to 4 bedroom) home by about 5 degrees every 3 hours. This means while it can take no more than a couple hours to lower the temperature to a comfortable range in the fall or autumn, it can take much longer in the summer.
Two thermostat issues that could cause your furnace to blow cold air include (1) your thermostat is still set to COOL, not HEAT and (2) your thermostat fan is set to ON, not AUTO.
One of the most common complaints among homeowners who possess a furnace is that their unit runs continuously. Unless you also have a heat pump (which can cause your unit to run frequently to maintain a set temperature during extremely cold weather), your furnace should cycle on and off at regular intervals.
Issues with the pilot light, high limit switch, blocked burners, leaky ductwork, electrical problems, and blower motor failures are common reasons for HVAC systems blowing cold air. These problems often require professional maintenance and repairs.