Common Reasons For Furnaces Blowing Cold Air: Your Furnace Isn't Warmed Up Yet. Your Thermostat is Set Incorrectly. The Furnace Filter is Dirty. Your Furnace Has Overheated.
First and most importantly, make sure your thermostat is set to Heating Mode. Next, verify that the thermostat's fan is set to AUTO, not ON. If it is set to ON, that may be your problem; switch it immediately. The ON setting makes the furnace fan blow continuously, even when the heating cycle is not activated.
The most common reason a heat pump is blowing cold air through your air vents is defrost mode. This is a safety feature to melt frost and ice within the system. During defrost mode your heat pump made switch modes to heat up the outdoor coils. Indoor temperatures will fall because the system is briefly in cooling mode.
With a furnace blowing cold air, the first question you should ask is if the furnace has been turned ON. Two thermostat issues that could cause your furnace to blow cold air include (1) your thermostat is still set to COOL, not HEAT and (2) your thermostat fan is set to ON, not AUTO.
Typically, there's a 10 to 15 minutes allowance for this. However, if after this time it's still producing cold air, then there's an underlying problem that needs to be addressed. It would be wise to turn the furnace off and get in touch with a pro immediately for help dealing with the issue.
Simply reset the thermostat to AUTO. What causes the heater fan to emit cold air is the ON switch allows the fan to operate even when heat isn't required to maintain temperature control. Checking the pilot light and seeing if it is out could be a quick fix also. If the pilot is out you can try relighting it.
If ductwork is not configured correctly, and the system is sized incorrectly, your home may still be cold even when the heating is on. With ductless system, there are no air leaks through ductwork. If properly sized, ductless is usually more efficient than traditional systems.
Make sure the thermostat is set to “AUTO” and not “ON.” When switched to “ON,” the fan will continue to run even when your heat pump is not heating anything. This might give the impression that cool air is blowing out of your vents.
One of the most common issues with a heating system not functioning is dirty air filters. If your air filters are extremely dirty, then the airflow can be blocked. Check for clean air filters, vents, and registers. Make sure there are no rugs or furniture blocking vents or registers as well.
Problem 1: Incorrect thermostat settings The most common reason for a furnace fan that won't shut off or a furnace blowing cold air and won't shut off is the wrong thermostat settings. The solution: Check the thermostat settings. The fan setting should be on AUTO. If it's set to ON, the furnace fan won't shut off.
It May Be Blowing Relatively Cooler Air
Given that the ideal thermostat setting is at 68 degrees, blown air at 90 degrees is actually warmer than what is needed for heating. However, it is cooler compared to the average body temperature of 98.6 degrees, which makes it feel cool, and is often mistaken for cold air.
While furnaces can stop operating for complicated reasons, home owners should check a few usual suspects first behind a lack of hot blowing air: Electrical problems causing a loss of power. Blocked air vents and ducts restricting airflow. Improperly configured thermostat settings.
Dirty filters, leaky ducts, and poor insulation can cause cold return vents. Leaky ducts often cause cold air to blow even after cranking the heat up. 20-30% of air, especially hot air, is lost because of leaky ducts. Cracked, holey ductwork needs sealing or replacement.
Accidentally leaving your thermostat set to "cool" or setting the fan to "on" can cause cold air to come out instead of hot air. It also could have run out of batteries. Either way, the solution here is simple. Head over to your thermostat, make sure it has plenty of battery, and verify that the heating function is on.
If your heat pump is on but not blowing hot air, it could be due to a dirty air filter, low refrigerant levels, or a malfunctioning thermostat. The outdoor unit may also be iced over, or the reversing valve may not be working properly. Contact a professional for further inspection.
There are a few possible reasons your heat pump might be blowing cold air: Your heat pump is in defrost mode. There's an issue with your heat pump. It's below freezing, and you need a backup heat source.
The Coils are Clogged
If the coil becomes clogged with dirt, dust, or debris, it hampers the heat absorption process. A clogged coil reduces the furnace's ability to absorb heat efficiently, leading to your furnace blowing cold air instead of warm air.
When a furnace blows cold air, there may be an issue with the unit's electronic control panel. This is sometimes easily solved by resetting the system. Turn off power to the furnace at its ON/OFF switch.
When you turn the furnace on but no heat comes out, there may be an obstruction. Dirty air filters restrict airflow, which can make it feel like not much heated air is coming out of your vents. Check the furnace filter and replace it if its surface is covered with contaminants.
Let's cover some major reasons that your heat pump isn't getting your house completely warm: Snow or ice is getting in the way. Thermostat settings keep changing. Your heat pump was improperly installed.
If your air conditioning unit is ac blowing cold air outside, it might mean there's a problem with cooling the air inside. This could be due to refrigerant leaks, frozen coils, electrical issues, or airflow problems. It's important to find out why to fix it and keep the cold air inside.
Pilot Lights and Flame Sensors Could Be the Issue
A modern furnace without a pilot light relies on flame detectors to ensure the successful completion of a heating cycle. If the flame detector is covered in dust, dirt, or grime, you will quickly lose heat and your gas furnace will start blowing cold air.
If your furnace is blowing hot but your home is still cold, it may be a problem with your ductwork. You may have leaky or damaged ducts that are letting hot air escape and cold air in. Sometimes a damper in the system can get miss-adjusted or come loose, thereby inadvertently blocking or reducing airflow.
If you're cold even though your thermostat indicates you shouldn't be, your furnace likely isn't the problem. In most cases, it's working just fine. It's your home that needs attention. Lack of insulation, severe air leakage, and/or unbalanced ductwork are frequently to blame.
This problem often points to inadequate circulation of warm air. It could be due to blocked vents, a failing HVAC fan, or issues with the furnace itself. Ensure that furniture or drapes are not blocking your vents.