If your AC is running but not cooling, it could be due to a dirty air filter, incorrect thermostat settings, a malfunctioning thermostat, a refrigerant leak, dirty condenser coils, blocked vents or ducts, a faulty compressor, frozen evaporator coils, or electrical issues.
One possible reason your AC is not reaching the set temperature is that the thermostat could be dirty. If dirt, dust, or other debris has accumulated within the thermostat box, it can cause the wires to heat up or other issues. Thermostats are cleaned during routine HVAC maintenance to help prevent this from happening.
Refrigerant Leaks and Low Levels
Refrigerant is the lifeblood of your air conditioning system, absorbing heat from your home and moving it outside. But when your AC develops leaks or the refrigerant level drops, it won't be able to cool your home effectively.
If your AC isn't lowering the temperature, have your HVAC technician check the refrigerant charge. There's a good chance it's off.
Make sure the thermostat is set to the correct temperature and that it is set to "cool" mode. If the thermostat is set too high or is in "fan" mode, your AC won't cool your home effectively. Additionally, check the batteries in your thermostat to ensure they are not dead or low. Clean or replace the AC air filter.
To fix an AC not blowing cool air, ensure the thermostat is set to "cool" mode and the temperature is set lower than the current room temperature. Inspect the air filter as a dirty filter can restrict airflow. Ensure the condenser coils are clean and free of debris. Make sure vents are open and unobstructed.
For many of us, 70 degrees is the ideal indoor temperature, but when it is close to 100 degrees outside, your AC unit will be working quite hard to meet these expectations. Consider setting your thermostat at 75 degrees to 80 degrees in your home if the outside temperature is approaching triple digits.
A bad thermostat can be detected when your AC or furnace is not turning on, your HVAC systems are not turning off, the thermostat not responding, your HVAC system is short-cycling, the room temperature not matching the temperature displayed on the thermostat, and the programmed setting resetting themselves.
Check for dust, dirt, and other kinds of residue inside the thermostat. Excessive dust and dirt buildup can prevent your thermostat from working properly. Clean any residue you see on the thermostat, and see if that helps improve the temperature in your home.
Start by making sure you have it set to your desired temperature and that it's switched to the “cool” setting. Next, double-check your vents to ensure they're open and free from obstructions. If that doesn't work, remove your A/C filter, and inspect it for any dust or discoloration.
Cooling a house from 80 to 72 degrees is a common goal for many, especially during the peak of summer. On average, this process takes roughly two and a half to three and a half hours.
The thermostat needs to be recalibrated.
Sometimes, your furnace or AC system won't hit the thermostat temperature because the thermostat isn't correctly calibrated. This can be a common issue with new thermostats, and also often occurs after a power outage or when the thermostat's batteries are running low.
Clean the Thermostat. Sometimes, when the room temperature doesn't match the thermostat setting, the problem could be dirt buildup on its interior parts. A dirt coating around the inner components may create excess heat and cause the thermostat to give the wrong readings.
First, check your filters and coils for dirt and debris that may be impeding airflow. Once you've cleaned the filters and coils, run the air conditioner with just the fan so that the ice accumulation can melt off. If the AC still doesn't blow cold air, it could be that refrigerant levels are too low.
On average, an air conditioner running in good condition should take about 15-20 minutes to drop the temperature by 1 degree in a standard-sized room. However, factors like outside temperature, unit size, and insulation quality can affect this timing.
Your system has a refrigerant leak.
Outside of your air filters or condenser unit being dirty, another potential issue could be a refrigerant leak. For your air conditioner to keep your home at your desired temperature in the summertime, your system needs refrigerant.
There are a number of reasons why your air conditioner might be running but not cooling. It could be an issue with the thermostat, the compressor, or the evaporator coils. Or, it could simply be clogged with dust and debris, which is preventing it from working properly.
When your thermostat is working correctly, you can keep it as cool or warm as you need. A bad thermostat can cause your AC to not cool or heat the room to the desired temperature. Air conditioning concerns are more apparent: Your thermostat is one of the best indicators of your air conditioning system's health.
Standard thermostats: Enlist a friend or family member to assist, Position one person by the thermostat and one person by the furnace. Slowly turn the thermostat from off to heat and increase the temperature. Both the thermostat and furnace should make a sound.
Just because the outdoor temperature is above 100, the Ideal temperature to set your AC unit to doesn't change — it's 78 degrees. Higher temperatures in the home are to be expected when the weather is hotter than usual, but your thermostat can still be set the same as if it were a lower temperature outside.
Setting your air conditioning to 72°F is generally considered a comfortable indoor temperature for many people. It strikes a good balance between comfort and energy efficiency, making it a popular choice for residential settings.
Key Takeaways. It's more energy-efficient to keep your AC on but set a few degrees higher when you're away from home for the day. Completely turning it off doesn't necessarily save energy as the unit will have to run longer to cool down a hot house upon your return.