Why is my AC handler not kicking on?

Author: Rosalia Gorczany  |  Last update: Wednesday, July 9, 2025

Resetting your thermostat is often all that's necessary to get it working again. A tripped circuit breaker is another common reason why your AC won't turn on. Using too many appliances at once can trip the circuit breaker. This is also common when there are power surges after a big storm.

Why isn't my air handler kicking on?

There are a range of reasons why your air handler may not turn on. Some may not even have to do with the air handler: a malfunctioning thermostat can cause parts of your HVAC system (including your air handler) not to run when they should. The circuit breaker to your malfunctioning air handler(s) might also be tripped.

How do I reset my AC air handler?

It's a small, red button usually located on or around the unit. The button should have a clear 'reset' label. Once you find the button, press it for around three seconds and observe the AC. Check whether the AC kicks on immediately and if it doesn't, press the button again for another three seconds.

What would cause my AC to not kick on?

Power issues: A tripped circuit breaker or blown fuse in your home's electrical system will prevent your AC from starting. Thermostat problems: Make sure you have your thermostat set to “cool” and the temperature is set below the current temperature in the room.

Why is my air handler not blowing air?

If your air handler is running but not blowing air, there are two likely scenarios: either a broken AC blower belt or an issue with the motor itself. If the air handler is humming or buzzing but not making the mechanical sounds of a motor running, you're most likely talking about an issue with the motor itself.

Air Conditioner Not Turning On! Nothing is Happening! 10 Common Problems!

Why is my outside air handler not turning on?

The main reasons your AC unit outside is not turning on could be something that has tripped the circuit breaker, something is blocking the fan's airflow, or the condensing unit is damaged. Other potential issues could be the thermostat isn't set correctly or the compressor could be malfunctioning.

How do I get my AC to kick on?

Follow these steps.
  1. Step 1: Check the thermostat. Make sure that your thermostat is set to "cool" and not "heat" (if it's set to heat, your AC won't turn on no matter what). ...
  2. Step 2: Check the air filter. ...
  3. Step 3: Check the circuit breakers. ...
  4. Step 4: Clear the condensate drain.

How to tell if an AC capacitor is bad?

A sure sign of a bad AC capacitor is a humming sound from within the access panel. Any humming noises indicate a problem with the air conditioning system or the components of the AC unit. Try turning the power on and off again to see if it was a one-time issue with the motor or a recurring problem.

How do I force my AC to turn on?

Check Your Circuit Breaker

Locate your main circuit breaker and switch it back to the "On" position. Wait 30 seconds and turn on your air conditioner again. If it still doesn't work, you'll need to call a professional for help.

How do I force restart my AC?

Use the Reset Button on AC Unit

Don't worry; the reset button might be able to solve the issue after a sudden disconnection or power outage. You can press the “Reset” button on the air conditioning unit, often shown as a small red button, to bring your air conditioning unit back to life.

Why is my AC handler running but not cooling?

There are a number of reasons why your air conditioner might be running but not cooling. It could be an issue with the thermostat, the compressor, or the evaporator coils. Or, it could simply be clogged with dust and debris, which is preventing it from working properly.

Do all outside AC units have a reset button?

Not all air conditioning units have a reset button, but if yours does, it's typically located on the outdoor unit. Here's how to locate it: Turn Off the Power: Before you search for the reset button, ensure the power to the unit is turned off for safety reasons.

How do I reset my AC handler?

In AC systems, the air conditioner reset button is on the outside unit's lower edge, typically close to the ground. Some models have the reset button located behind the service panel, which may require tools to remove. Reset buttons are usually red or yellow with a clear “reset” label.

How do I know if my air handler is bad?

If you've been experiencing unusual noises, inadequate cooling or heating, excessive dust and poor indoor air quality, escalating energy bills, frequent repairs, aging system, insufficient airflow, or uneven temperatures in your home, it may be time to consider replacing your air handler.

Why won't my outside AC unit kick on?

A tripped circuit breaker can be a major cause of why an outside AC unit isn't turning on. This occurs when the current is too high in the outdoor unit, causing the breaker in the fuse box or main electrical panel to switch off power to the unit, resulting in it not receiving any electricity.

How do you reset an AC capacitor?

Some air conditioning systems have a reset switch, which is a small, red button. Typically, the button will be on the outdoor unit. If you have a problem locating it on the outdoor unit, you may find relevant details on the equipment's manufacturer's manual. Press the red button for three seconds and release.

Will the fan still run if the capacitor is bad?

If your HVAC capacitor is bad, the motor will run at higher amplification, run backwards or stop running altogether.

What is the most common part to fail on an AC unit?

#1 Most Common Air Conditioning Repair – Bad Capacitor

The fan of course makes a whirring noise, the compressor is like a deep buzz like a refrigerator running. Holding your hand above the fan should feel warmer than the outside air.

Why is my air handler not turning on?

First make sure there is power to the indoor unit and that a switch or breaker isn't off. Some indoor units (Heat Pumps) have breakers right on the Air Handler itself. But also check the main breaker panel. Some units have a shutoff switch on the side of the unit or an Emergency Switch located on a wall.

Why wont my AC kick back on?

Resetting your thermostat is often all that's necessary to get it working again. A tripped circuit breaker is another common reason why your AC won't turn on. Using too many appliances at once can trip the circuit breaker. This is also common when there are power surges after a big storm.

How to tell if an AC fuse is blown?

Blowing the fuse cuts the power to the unit to prevent electrical damage. If your AC has shut down and won't start again, especially if you've noticed odd electrical behavior immediately before the shutdown, chances are the fuse has done its job and will need to be replaced.

How much does it cost to replace a capacitor in an air conditioner?

For AC capacitor replacement, anticipate spending between $150 and $400, depending on the capacitor's type and accessibility. A bad AC capacitor is a fairly minor repair, and most HVAC technicians will recommend a repair rather than replacing the unit when the capacitor is the problem.

How to tell if a home AC relay switch is bad?

If you want to learn how to tell if your AC relay switch is bad, the first step is to look out for the following symptoms:
  1. Compressor-Related Issues.
  2. Ineffective Cooling Ability.
  3. A Lack of Airflow.
  4. Odd Odors From the Cooling Unit.
  5. New or Loud Noises.
  6. Rising Energy Bills Without Extra Cooling.
  7. Inconsistent Cooling Power.

Can a blown fuse cause AC not to work?

If your AC fuse is blown, it's most likely that your air conditioner will stop functioning entirely. Or, it will keep the blower running, but every other component will stop working. Of course, there could be other problems that make your AC stop working. So, how do you tell for sure whether your AC fuse is blown?

Previous article
Where to dry towels after a shower?
Next article
How can you tell if tempered glass is cracked?