Extra Strength for Your Walls Whereas drywall is really more of a finishing touch, plywood actually ties in and provides a structural element to your garage. This becomes especially valuable if you plan on doing a lot of mounting on your walls – for tools, work-stations, or equipment storage.
Garages often have power tools in them, flammable materials, and also people who work on cars with products that could catch fire. Installing drywall would be a good idea to keep it a safe area.
Cost savings: Unfinished garages are generally less expensive compared to finished ones, providing cost savings during the construction or renovation process.
Heat and flame rise vertically, and so the ceiling of a garage receives more heat more rapidly. When habitable space is built over the garage, the ceiling of the garage must be protected with 5/8-in. type X gypsum board. Any walls or posts supporting that habitable space must also be protected, but only with 1/2-in.
Plywood and OSB board, two common woods used for garage walls, are both durable and long-lasting options. They are durable enough to hang heavy items without worrying about hitting studs, and they can survive the abuse that occurs with careless young drivers. A room can be better protected from noise with their help.
You'll likely need a permit since this project may require soil grading to avoid drainage issues. Repairing your floor may be more cost-efficient than replacing it if grading is necessary. No permit may be required to hang drywall on exposed wooden wall studs in your garage.
The structure of plywood is stronger than drywall, making it suitable for utility areas like laundry rooms and garages. To improve the visual appeal of plywood walls, you can use varnish or sealer, stain or paint, or decorative accents.
Garages require at least one 120-volt, 20-amp circuit with GFCI protection and at least one switched lighting outlet that cannot be connected to the 20-amp garage circuit.
If you're tackling a single-car garage, you can expect the total cost to land somewhere between $360 and $840. For a two-car garage, the cost rises to $660 to $1,540. And if you have a larger three-car garage, you could be looking at $930 to $2,170 to drywall the entire space. Keep in mind that these are just averages.
That being said, not every buyer will consider a home without a garage as a deal-breaker. On the other hand, it's not likely a buyer will object to a house that has a garage and meets their needs. Having a garage will nearly always help you sell more quickly and likely at a higher value than a home without one.
Garages are built for cars and yard equipment and, therefore, are often not well insulated. To address this, you need to make sure the garage ceiling is properly insulated. Builders sometimes forget to insulate the floor (garage ceiling) of this type of room.
When it's cold outside, the drywall contracts, and when it's warm outside, the drywall expands. This can cause the drywall to crack along the seams. Another reason is because of the moisture in the air. When the air is moist, it can make the drywall swell and cause it to crack.
Fiberglass Insulation
The rolls can be made with or without paper, which can give the final product a more finished look if you don't plan to install drywall. The paper also helps prevent interior heat from escaping and water passing through the insulation.
One key difference between the two is that sheetrock is a brand name of drywall made by the United States Gypsum Corporation. Another difference lies in their production process; sheetrock has a slightly denser core than drywall due to the addition of a small amount of wood fiber to the gypsum core.
Drywalling a garage is a smart decision if you want to protect your garage from fires, moisture damage, and exterior noise. Most garages have flammable supplies that could result in serious damage in the off chance of an accident. Drywall is fire resistant, helping to prevent fires from spreading.
Cost-Effectiveness: Plywood and OSB are often more affordable than other wall materials like fiber cement board or metal panels, making them a budget-friendly option for homeowners looking to upgrade their garage walls without breaking the bank.
For those that spend a lot of time in the garage or have some of their most valuable belongings in there, putting up drywall in your garage is definitely worth while. It adds protection, appeal and longevity to your garage as a whole.
When building a new structure, obtaining a building permit for insulation is almost always necessary. This is part of a broader requirement where permits are needed for various aspects of construction, including excavation, foundation, framing, electrical, plumbing, and finishing.
Not typically – sometimes you may need to apply for it under specific circumstances, but it will usually be covered under permitted development rules.
Do I Need Planning Permission? In most cases, you will not need to apply for planning permission to knock down your house or any of its outbuildings, unless the Council has restricted this by placing an Article 4 direction on your property. If in doubt, please contact a local planning agent or your Council directly.
Two other garage wall covering alternatives to drywall are fiberglass reinforced panels (FRP) and wallboard panels. Keep in mind that these products are used only for covering and finishing walls and aren't designed to accommodate hanging storage systems.
Discover Trusscore PVC wall panels – the perfect waterproof drywall alternative for your garage, basement, car wash, or any wet environment. 🌧️ 100% Water-Resistant Prevents mold and mildew damage.
Plywood or OSB board: Wood walls make a durable option for garages: They can take a beating from teenagers carelessly backing out the family car and are strong enough to hang tools and equipment without worrying so much about studs. They also help absorb sound.