As the water flows out of the bowl when you flush it, the minerals it contains slowly etch away at the porcelain's sheen. This creates small holes where the contaminants start to accumulate and turn the bowl yellow. The two most common impurities that cause yellow stains are hard water minerals and tannins.
Spray vinegar at least once every few days inside the toilet bowl. Keep track of your toilet's appearance. If you see stains often despite your best cleaning efforts, perhaps there is a more serious problem with the pipes or water that needs to be checked by a specialist.
The answer to both of these questions has to do with the contents of your water. The contaminants notorious for causing brown stains in toilet bowls are iron, manganese and sulfur. These pollutants can also produce iron bacteria, manganese bacteria and sulfur bacteria, which also can produce brown stains.
The yellowness in your toilet might be caused by easily solvable issues such as yellow softener salt, municipal flushes, or stagnant water in toilet bowl. However, there are more complex cases like rusted pipes, water hardness, broken resin beads, or contamination, which may require you to call a professional plumber.
White Vinegar and Baking Soda
The best way to clean stubborn stains in your toilet is with baking soda and vinegar. Sprinkle a good amount of baking soda inside the bowl, then spray on the vinegar until it starts foaming. Wait ten minutes, then scrub the bowl vigorously with a toilet brush.
“Like when removing limescale from a toilet bowl, only using bleach does just half a job – the stains will become invisible, but the route of the problem will still be there, causing stains to return quickly while becoming deeper-set in the surface of the seat.”
White Vinegar and Baking Soda
Distilled white vinegar is a natural cleaner, disinfectant, and fungicide, and baking soda is a natural deodorizer, whitener, and mild abrasive. This stain remover combo works best when you need to know how to get rid of toilet stains caused by minerals or mold.
Brown water in a toilet is likely caused by rusted or corroded pipes, sediment, a blockage in your plumbing line, rusted toilet components, or iron bacteria.
Rusty pipes can be a major cause of discolored toilet water. When water flows through the rusted areas of the pipe, it can pick up and carry tiny metal particles into the toilet. These metal particles can then settle into the water and cause it to turn brown or yellowish in color.
If your pipes or water heater are rusty, the rust will clear itself once you replace the pipes or flush the heater. How long does it take for yellow water to go away? Yellow water in your home plumbing system should go away in about five to 10 minutes or less once a solution is in place.
After a routine cleaning, add a few ounces of liquid toilet cleaner or drop a dissolving tablet into the tank. The cleaner will run into the bowl with each flush, killing bacteria and eliminating residue. It will also help break down mineral deposits in the siphon jets. Shut the lid when you flush.
Hydrogen peroxide for pearly white toilets
This is another great alternative to bleach. It can be found at your local drug store, and works to both clean and kill germs. Use a ½ cup of hydrogen peroxide in the toilet bowl for 30 minutes and then give it flush.
Vinegar prevents limescale deposits and water rings from appearing. Pour about 3 cups (0.7 L) of vinegar into the bowl, making sure to cover all sides of the bowl as you pour it in. Let it sit for a while, then scrub the bowl thoroughly with a toilet brush and flush the toilet.
Yellow stains on tile floors can form because of moisture, hard water, soap scum and scale buildup. This yellowing can be noticeable on all colors and tile patterns but looks especially bad on white tile floors.
To clean your toilet seat, all you need to do is make a paste of equal parts bicarbonate of soda and distilled white vinegar. Apply the paste to the toilet seat and leave it to sit for between 10 and 30 minutes. Scrub the stains, then wipe the toilet seat with a cloth dipped in clean, warm water.
Chances are these issues are caused from a mineral in your water called manganese. Seeing manganese stains from your water isn't an emergency, but at high levels, it can have an effect on the quality of your drinking water, laundry, appliances and plumbing.
Clorox®Automatic Toilet Bowl Cleaner Bleach & Blue is an easy-to-use tablet that continuously cleans and deodorizes your bowl with the power of Clorox® Bleach. And you'll know it's working, because you'll see sparkling blue water in your toilet bowl.
Cause: Typically orange or reddish staining is caused by high contents of iron, which is most common in well water systems. These stains are typically found inside the home around sinks, tub drains, and toilets, and outside wherever irrigation is directed.
Cleaning with a mixture of baking soda and vinegar in the bathroom can work really well. To clean your toilet with vinegar, pour a cup of vinegar in the toilet bowl and let sit overnight. The next morning, sprinkle a little baking soda into the bowl, scrub, and then flush clean.
If the clog still seems to be intact, start over at step 1 and repeat the process a couple of times. For extra-stubborn clogs, you can let the fizz mixture sit overnight or combine this method with plunging.
Toilet Bowls.
Grab some gloves and use a Magic Eraser to go to town on toilet bowl stains. Some users even recommend cutting a piece off and letting it dissolve the bowl to remove that unsightly ring all on its own.