Why does my thermostat say hold? Simply put, it's your device's way of maintaining a set temperature outside of its programmed schedule. Whether due to a Temporary Hold or a Permanent Hold, this function can affect the comfort of your space and your energy use.
The Permanent Hold feature keeps your home's temperature at the same temperature indefinitely until you manually cancel it. If you can't reprogram your thermostat's temperature, this is likely the cause. You should be back on your programmed schedule as soon as you cancel it.
By pressing “Hold”, your thermostat will lock in the temperature it's currently at until you change it again. When you are ready for your normal schedule to resume, simply press the “Run” button and return to your typical programming.
Both features can allow you to save money on your energy bill. For example, the “hold” button can help you set the temperature to an energy-efficient level if you're out of the house for a few hours. On the other hand, the “run” button allows you to ensure that your scheduled temperatures remain energy-efficient.
Using the “hold” function on your system means you can suspend the program if you'll be away from home for a while, such as while you're on vacation. This means you can tell your HVAC to stay put at a specific temperature to keep your pipes from freezing in winter but as warm as you want it to be for comfort.
Access the Menu: Tap the menu icon on the thermostat's touch screen. Hold Down the Weather Button: Press and hold the weather button for five seconds. This will bring up the reset menu. Select Reset Option: Navigate through the options until you find “Factory Reset.” Tap on it to select it.
Once you have located the reset button, the process to reset thermostat settings is straightforward: Press and Hold: Using a small object, press and hold the reset button. The time you need to hold it can vary, but generally, 5-10 seconds should suffice.
Check the Power Source: Ensure your thermostat is receiving power. Replace batteries if your model requires them or check the circuit breaker if it's hardwired. Inspect the Wiring: Over time, wiring can degrade. Inspect for any loose connections or signs of wear.
Remove the temporary hold: Once you have found the current temperature setting, you should see an indicator that shows a temporary hold or override. This indicator may be a flame symbol or a clock symbol with a plus or minus sign. Press the appropriate button or use the arrows to remove the temporary hold.
When your thermostat says “hold,” it simply means that the hold function is active and the current system temperature will be maintained until you change it or the hold expires.
To do this, you can go to your settings on your thermostat, and you'll see a menu for the home and away setting. There, you can set the temperatures, times, and days you want the program to run. When you're done choosing the details of the program you want to set, press “set schedule,” and it will automatically set it.
This is a short cycle protection. Something has happened, usually a power outage and this is a protection for your unit to not turn on and short cycle before all the pressures have been equalized. Wait 3-5 minutes for your air conditioner to be ready to turn on again.
The word Hold will appear on the screen. Press the Run button if you wish to cancel either override and resume the schedule. The word Hold will disappear and the thermostat will be set to the temperature programmed for the current period. Also ensure that the heat - off - cool switch is set to the desired run mode.
If you own a programmable or Wi-Fi thermostat, keep in mind that a “temporary” hold is supposed to continue your typical schedule at the next programmed time. So you should try the “permanent” or “vacation” hold setting when going on vacation to make sure your preferred temperature sticks.
Turn your thermostat “off”, then flip the related circuit breaker “off”. Wait 30 seconds, then turn the breaker back “on,” then the thermostat. Set the thermostat to hot or cold, whichever you prefer, and your desired temperature. This should effectively reset it.
A Hold message on a Honeywell Thermostat tells the thermostat to maintain the HVAC system for the building at a set temperature. The temperature will be maintained until the Hold expires or the temperature is manually changed. A Hold can be temporary or permanent depending on its setting.
Hold the reset button (if present): Some non-programmable Honeywell Thermostats have a dedicated reset button, usually located near the display or behind a cover panel. If your model has one, hold it down for about 5-10 seconds while the power is off.
These are temporary holds and permanent holds. A temporary hold will keep the HVAC system set to the held temperature for a temporary period of time of less than 12 hours or until the hold is cancelled. A permanent hold will keep the HVAC system set to the held temperature permanently, until the hold is cancelled.
Troubleshooting a Programmable Honeywell Thermostat
Put in new batteries; Check the circuit breaker; Check the indoor unit to make sure all the panel doors are closed; Make sure the power is connected to the furnace or air conditioning unit by checking the switch near the indoor unit is up.
For Latest Honeywell Scanners:
Use the single bar code 'DEFALT' command to reset the device. Note: This selection erases all settings and resets the scanner to the original factory defaults.