In this article, we discuss three of the most common reasons why a furnace turns on without generating heat. These include incorrect thermostat settings, airflow problems, inadequate furnace fuel, and ignition problems.
A variety of factors can cause short cycling: a clogged air filter, a malfunctioning thermostat, a faulty limit switch, overheating, or a problem with the furnace's heat exchanger. Since short cycling is both a symptom of another problem and a problem in itself, have technicians look into it ASAP.
Check Furnace Thermostat Settings
Incorrect thermostat settings can be the cause behind no heat coming out of the vents, even with the furnace blower turned on. Check the thermostat to ensure the setting is in HEAT instead of COOL. It is a common mistake that happens. The fan runs continuously when it is switched on.
If your furnace will not stay on, it is usually a dirty flame sensor. This is one of the routines that every homeowner can do to troubleshoot a energy efficient furnace. By cleaning the flame sensor once a season, you can keep the furnace from cycling on and off too fast. Check out more home improvement tips in our e-
If your furnace turns on but no heat is produced, there may be a problem with the fuel supply or the ignition system. If something is stopping your furnace from receiving gas, there is no fuel to combust so the furnace will not create any heat. The furnace turns on but no heat comes out.
There are multiple reasons why your furnace is short cycling. These could include a dirty filter, blocked vent, or malfunctioning flame sensor. You can switch for a clean furnace filter, or have your HVAC technician resolve a more complicated issue.
If your thermostat is fully functional and you're still unable to feel any heat coming from the vents, you may be dealing with some of these problems: Dirty evaporator coils. Clogged pipes. Full air filters.
A propane furnace or oil furnace blowing cold air might indicate a low or empty fuel supply. And, a clogged oil filter can also cause an oil furnace to turn on and blow cold air. If you suspect a fuel supply issue with your natural gas furnace, it's best to contact a qualified professional.
Short cycling is a common sign of a bad flame sensor. The sensor thinks that there isn't a flame, so it shuts off the gas as a safety mechanism. Except, there is a flame and without the gas to supply it, it dies. This is a frustrating problem, but an HVAC technician can fix it.
While furnaces can stop operating for complicated reasons, home owners should check a few usual suspects first behind a lack of hot blowing air: Electrical problems causing a loss of power. Blocked air vents and ducts restricting airflow. Improperly configured thermostat settings.
If your furnace won't turn on but fan works, it could be that the pilot light (or ignition switch) is out. A nifty safety feature that your furnace has that you may be unaware of is your pilot light which prevents pumping natural gas or propane into your home.
A Recap of Why the Thermostat Says Heat On But No Heat Comes from the Furnace and What to Do About It. Dirty air filter–Change it. Gas supply turned off–Turn on the valve or call the gas company. Incorrect thermostat settings–Review all the settings and change them if necessary.
This problem often points to inadequate circulation of warm air. It could be due to blocked vents, a failing HVAC fan, or issues with the furnace itself. Ensure that furniture or drapes are not blocking your vents. Also, check if your furnace's filter is clean, as a dirty filter can restrict airflow.
Your furnace will blow cold air if there is no air to heat and send back into your home. Another reason you may not be getting enough air flow is if your ductwork is not sized properly. Unfortunately, this is quite common. If your return ductwork is too small, it will not be able to take in the required amount of air.
Make sure your thermostat is set to “heat” and the temperature is high enough to turn on the furnace. Go to your electrical panel and check the circuit breaker. If it's tripped, reset it and turn the furnace back on. Check your furnace filter and if it's dirty replace it with a new one.
If your furnace is blowing hot but your home is still cold, it may be a problem with your ductwork. You may have leaky or damaged ducts that are letting hot air escape and cold air in. Sometimes a damper in the system can get miss-adjusted or come loose, thereby inadvertently blocking or reducing airflow.
In this article, we discuss three of the most common reasons why a furnace turns on without generating heat. These include incorrect thermostat settings, airflow problems, inadequate furnace fuel, and ignition problems.
Some of the most common thermostat issues include:
The thermostat is broken, not properly level, or dusty. The thermostat needs to be recalibrated. There is loose wiring causing a thermostat issue. The thermostat is not in an ideal location in your home.
Often, no heat in the home is a result of thermostat issues, whether they be true malfunctions or errors in settings. Whenever you notice no heat, check your thermostat first for troubleshooting. Make sure your thermostat is on – the display should be on as normal. If it's not, there could be a power issue.
A bad thermostat can be detected when your AC or furnace is not turning on, your HVAC systems are not turning off, the thermostat not responding, your HVAC system is short-cycling, the room temperature not matching the temperature displayed on the thermostat, and the programmed setting resetting themselves.
Faulty thermostat.
Old wiring or dead batteries: Replace batteries or old wiring to ensure accurate temperature readings. Thermostat location: If your thermostat is too close to a heat source (like sunlight or a heat register), it can misread the temperature and cause your furnace to keep shutting off.