Green discoloration in a swimming pool is caused by the growth of algae, a type of green aquatic plant that floats on the surface of water. Algae usually flourishes in warm water but can still take over your pool in winter if given half a chance.
Use a pool brush to vigorously scrub any pool surfaces covered in algae, including the walls, floors, and steps. Apply a green algaecide according to the directions on the label. Let the water circulate for 24 hours, then brush the pool surfaces again. Vacuum or backwash to remove any remaining dead algae.
What Happens To Algae During Winter? After closing and cleaning inground pools, temperatures start to drop. The colder weather helps with preventing green pool problems but it doesn't completely solve them. Warmer days can lead to algae growth without proper inground pool maintenance.
Algae growth is stopped at temperatures below 40° F, but some algae can continue to survive, and like weeds in a lawn, can go dormant over the winter, coming back to life in early spring, weeks before you open the pool.
Closing a Pool with Green Water
No, not really. Why? Because closing a pool when its green is going to give you an even bigger problem in the spring or the next time you open it. When you are experiencing cooler, fall like temperatures, it takes longer for the chlorine and other chemicals to evaporate.
The free chlorine levels might be low.
But be careful—adding too much chlorine in pool water can cause those metals to oxidize and turn the pool a different shade of green.
Baking Soda and Green, Blue, or Yellow Algae
You'll need to use an algaecide to kill the algae and superchlorinate your pool to clear the water. After this treatment, test your pH and alkalinity and add baking soda to raise alkalinity to at least 100 ppm and pH to between 7.2 and 7.8.
Pool water turns green because of algae in the water. Algae can grow rapidly, particularly when it's warm like Summer, which is why it can surprise you overnight. This generally comes down to an imbalance or lack of chlorine in the water.
A late September or October closing is a great way to set up for success in the spring. If you are already suffering from an algae bloom; take care of that before you close. Opening your pool early in the spring is a good idea if you want clear water.
Shocking the pool during the winter months can certainly help to avoid a green swamp-like pool in the spring. It's often recommended. However, poor water balance or improper application can lead to unintended consequences, such as discoloration and damage to pool surfaces.
Shock the pool with chlorine every day until all the green is gone (possibly 3 to 4 days). 2. Run the filter 24 hours a day and backwash every day until the green and then cloudiness is gone (usually up to 7 days, sometimes as long as 2 weeks depending on the filter). 3.
Grab a brush and some baking soda. Bicarbonate, the active ingredient in baking soda, is an effective spot treatment to help kill the algae and loosen it from the wall. Make sure you really get every last particle free; black algae has particularly long and stubborn roots which makes it a persistent strand.
But is it safe to swim in a pool with algae? Whether mild or severe, it isn't recommended. Significant amounts of swimming pool algae welcome a breeding ground of harmful bacteria that feed on algae. These bacteria pose health risks to swimmers, most commonly resulting in a skin rash.
All you need to do is bypass the filter and pool vacuum for algae to the waste. However, this can only work if you have a multiport system or a waste line system in your cartridge filter. Vacuum the pool to waste after you have set up the waste, and the debris and algae will get out of your pool.
Clorox itself recommends using between 100 and 200 ounces of regular-strength bleach per 10,000 gallons of pool water -- one gallon is 128 ounces, and many bottles of bleach are available in one-gallon or half-gallon sizes. Pool professionals tend to recommend more conservative amounts of bleach.
It is important to know what exactly bleach is before you put it in your pool. Household bleach, Clorox and liquid chlorine can all be used to sanitize a pool. They are all types of chlorine. Household bleaches such as Clorox usually contain about 5-6% available chlorine, about half that of pool liquid chlorine.
Algae will remain in your pool after shock if you've had insufficient chlorine and an overabundance of metal elements in the pool water. Therefore, to start the cleaning process. Remove all the debris from the pool with a leaf net and then let the smaller dirt fragments settle.
The pool turned green from copper, not algae
Think of the Statue of Liberty. It is made of copper, and has turned green over time through oxidation.
Green algae, unlike its black counterpart, is a true algae; it isn't resistant to chlorine, so you can control it by shocking the pool. If you don't want to spend a lot of money on expensive pool chemicals, you can shock with household bleach.
You will need to quadruple shock your pool by added 4 pounds of shock to every 10,000 gallons of water. This can be expensive if you have a large swimming pool.