Here is what usually causes a Kwikset lock to not work after a battery change: Batteries Incorrectly Installed. Dirty or Corroded Connections. Technical Glitch in the Lock.
My Keypad Is Unresponsive
Test each button on the keypad (one at a time), and listen for a beep as each button is pressed. If beeping is not heard on all buttons, replace the batteries. If battery replacement does not solve the problem, contact Kwikset Support at 1-866-863-6584.
Check that the LED option is turned On in the Kwikset App. The Status LED is set to On by default. Check that the batteries have power, are inserted correctly into the battery pack, and that the battery pack is inserted correctly.
If the smark lock is not responding, the issue may be communication. It's possible that the smart lock won't calibrate or connect with the panel. Try rebooting the door lock by removing the batteries. Removing the batteries will force the device to reset.
Replace batteries with new ones to ensure that lock is properly powered. Typical battery life based on 10 entries per day is 10-12 months if the door is properly aligned and the lock does not encounter interference in lock/unlocking the door.
How do I know when the batteries are running low on my Smartclode 909/910 deadbolt? There are two low battery indicators on the unit. The LED light on the interior side of the lock will flash red when the batteries are low. The keypad will also flash red when the batteries are low.
The battery is too low to lock the door. This is indicated by the Checkmark and Lock symbols flashing simultaneously five times with five beeps. Remove the batteries and replace with a fresh set. The mounting plate is placing tension on the torque blade.
Eventually, after many months of safeguarding, that smart lock battery will drain. What happens if your smart lock battery dies? The good news is that we call these locks “smart” for a reason. Before their batteries die, most smart locks will let you know that they're running low on juice.
Check or Replace The Batteries
Also, if your lock stopped working after a battery change, the batteries may not have been put in correctly or fully reconnected. If you haven't changed the batteries for a while, try changing them out with all-new ones to test them at full power.
Your Smart Lock will give you low-battery warnings for multiple weeks before it loses power. However, if your Smart Lock dies entirely before you can replace your batteries, your key will still work. This is the same deadbolt key that you've always used - the Smart Lock doesn't change the key needed.
2 Kwikset: Factory Reset
Slide up the cover to open the back of your lock, exposing the buttons beneath. Push and hold the reset button for 10 seconds, until the lock beeps. The light ring will flash red, then spin amber. The lock has now been restored and is ready to be set up again.
Make sure the door is open and unlocked. Press and hold the Reset button for 5 seconds, until you hear 3 long beeps. 2. Enter the default Mastercode (O-O-O-0).
On my Smartcode 888, the lock button flashes red with fast beeping sounds for three to four seconds. This is a low battery alert. Please replace you batteries.
For a simple fix, try applying powdered graphite or a dry Teflon lube spray to the keyhole to get the lock moving. Exterior doors, which are exposed to the elements, may benefit from a commercial lock cleaner sprayed into the keyhole to dissolve dirt or debris.
The lock should beep twice when it unlocks and once when it locks. It will also beep if there is a warning such as a low battery or a jammed bolt.
...the lock itself is so weak that a 10 year old kid can slam a screwdriver in it and force the cylinder to turn and unlock and be in your house in a matter of seconds... Any thief with a "bump" key will open this 200+ dollar lock in 5 seconds... Kwikset locks can be easily unlocked with a blank and a screwdriver.
If the key won't turn in the door lock, the problem could be dirt or dust in the cylinder causing the pins to be stuck in a partially raised position. If that's the case, it may be an easy fix. You can spray dry lubricant into the keyway and then insert the key a few times to get the lubricant working.
1. Traditional Key. Most keyless locks can still be opened and locked using the traditional key as a backup when power is lost.
Fortunately, today's keyless locks have been engineered to require only a very minimal amount of battery power per use, so battery failures will be very few and very far between. In fact, most keyless locks can operate anywhere between 3-5 years off the original batteries.
Factors like the weather, damage to the key, and even a buildup of dirt and grime inside the locking mechanism can all stop a door from locking. If you're having trouble locking your front door on a regular basis, you should consult a locksmith as soon as possible.
Check for low batteries. If the red light on the back of your door lock is blinking or if you have a low battery alert on your touchscreen panel, you'll need to replace your batteries with four new AA batteries. If the key doesn't turn smoothly, check for physical obstructions to the lock or in the door jamb.
No, user codes will not be lost if the batteries die or are removed.