Stones like limestone, marble, or travertine will react to vinegar because it's an acidic cleaner with harsh effects. It can even lead to burning or etching to occur on the surface of the stone.
What you should Not Do: Don't use vinegar, lemon juice, or other cleaners containing acids on marble, limestone, travertine, or onyx surfaces. Don't use cleaners that contain acid such as bathroom cleaners, grout cleaners, or tub & tile cleaners. Don't use abrasive cleaners such as dry cleansers or soft cleansers.
Clean stone surfaces with warm water and a mild soap such as a clear Dawn Liquid Soap. Do not use products that contain lemon, vinegar or other acids on marble or limestone. Rinse the surface thoroughly after washing with the soap solution and dry with a soft cloth. Change the rinse water frequently.
Acidic commercial cleaners and those containing harsh chemicals, like bleach, can damage and dull natural stone surfaces.
Grout that hasn't been sealed, needs to be resealed, or is in poor shape should not be cleaned with vinegar. The vinegar penetrates into the pores of the grout, further weakening the material. Over time, vinegar will deteriorate the condition of the grout by etching or wearing it away.
Rinsing is not necessary! If you're simply using a vinegar and water solution to wipe and disinfect, you won't need to rinse. However, if there's also plenty of dirt and grime you're wiping away, you may also want to rinse with some extra water.
Clean stone surfaces with a neutral cleaner, stone soap, or a mild liquid dishwashing detergent and warm water. Similar to any item cleaned in your home, an excessive concentration of cleaner or soap may leave a film and cause streaks.
Many home cleaning products, particularly bleach and vinegar, are too harsh or acidic to be on natural stone. These cleaners strip down the stone and leave it in a weak, damaged state. Unfortunately, whenever natural stone is damaged it cannot always be repaired back to its original condition.
And in this case, this mixture does not work well with the natural stone countertops. Due to the fact that vinegar is acidic substance and baking soda is caustic, the result of mixing the two can have an unstable effect on stones that are porous.
⇒ While using vinegar on granite countertops or natural stone surfaces, may damage the seal and polish layer applied to them. ⇒ Sometimes, vinegar can cause structural damage to your stone surface. ⇒ Instead of removing stains, vinegar can cause hard stains on the natural stone.
Rocks that contain calcium carbonate can erode when they encounter acids, and limestone contains calcium carbonate. Vinegar is acetic acid, and limestone is a base. An acid plus a base causes a chemical reaction. So, vinegar combined with limestone creates a chemical reaction.
DON'T: Use harsh or abrasive cleaners and sponges.
Windex; acidic cleaners, like vinegar, lemon, lime; or anything with ammonia or bleach should be avoided. Frequent use of these chemicals will dull and weaken the sealant over time.
Many collectors choose to remove calcite from rock and mineral specimens. Calcite often forms over quartz and other more desirable crystals and is more difficult to remove. Use household vinegar to help dissolve calcite from your finds before displaying.
Diluted hydrogen peroxide works well on Sandstone, Marble, Bluestone, and Travertine. In the case of Granite floor, simply brush the area in dry condition. No solution is required to cleanse moulds or algae from Granite floor.
Just get the water a bit sudsy and brush as hard as you can. Use a nylon brush initially, there are very few stones that can be damaged with a normal scrub brush. I like to use a big brush initially and then an old toothbrush to get the smaller spots afterward.
When using Dawn Powerwash, you should avoid cleaning porous surfaces such as marble and other soft natural stones or untreated wood. It is also best to keep Dawn Powerwash away from painted surfaces, too.
Simple Green Granite & Stone Polish is safe for use on granite, marble, travertine, limestone, porcelain, ceramic, quartz, Corian®*, Silestone®*, and other natural and engineered stone surfaces.
Keep It Simple to Clean Natural Stone
You can use any type of mild soap detergent, such as dish or hand soap, and mix it with a little water. Wet the stone first, and then use a bristle brush and soap solution to wipe the stone clean. The last step is to make sure you rinse thoroughly.
Pour equal parts of vinegar and Dawn into a spray bottle. Gently shake, then spray liberally onto the surface to be cleaned.
“Vinegar is a good cleaner because it's acidic, but when you add dishwashing liquid/dish soap to it (which is a base or neutral) - you neutralise the vinegar. You take away the very thing that makes it work well. “The dishwashing liquid works that well on its own. Adding the vinegar is a pointless step.”
Now, don't confuse distilled with basic white vinegar, which is stronger and has up to 25% acetic acid. That vinegar is sold exclusively for cleaning purposes and is not a good idea to ingest. However, beyond cooking, distilled white vinegar can be used for many of the same household chores.