You should avoid using Dawn Powerwash on marble because its formula contains alcohol and is highly concentrated. These two factors can damage marble in a few specific ways:
No, Dawn Powerwash is not recommended for marble. While regular, diluted Dawn dish soap is pH-neutral and safe for natural stone, the Powerwash formula contains alcohol and active solvents. These ingredients can degrade the protective sealant on your marble and etch, dull, or discolor the stone over time.
Mild Soap and Water
This simple solution is really all you need to give your marble every day clean. Just dilute some mild soap with water, dip in a soft cloth, wring it out, and then wipe clean. You can do this for both your marble countertops and floors, so long as you're careful about leaving any standing water.
When Murphy's Oil Soap Works Well. If you've run out of your preferred pH-neutral stone cleaner and need a quick solution, Murphy's may be suitable for: Marble and limestone floors needing light, everyday cleaning. Travertine, especially honed or tumbled finishes.
Because Dawn Powerwash contains grease-cutting solvents and alcohol, it is too harsh for delicate, porous, or treated surfaces. As a rule of thumb, do not use it on anything you wouldn't clean with rubbing alcohol.
Hotels keep glass shower doors spotless by combining strong commercial cleaning agents with routine maintenance and smart preventative coatings. Because they deal with heavy daily guest turnover, housekeeping staff rely on quick but highly effective strategies to prevent soap scum and hard water buildup.
Yes, you can use Dawn Powerwash on granite, but it must be heavily diluted. Dawn Powerwash is incredibly concentrated and contains grease-cutting surfactants and alcohol. If used improperly, it can leave a cloudy, streaky residue on your counters, strip away the protective sealant, and dull the polished shine.
No, you should not use Windex on marble. The ammonia in traditional glass cleaners is too harsh and can permanently dull the stone, strip its protective sealant, or cause yellowing over time. Instead, clean your marble using a few drops of mild dish soap and warm water.
One of the easiest and best ways to keep stone surfaces clean is with a mixture of warm water and gentle dish soap. You'll want to make sure to avoid any cleansers that feature acidic ingredients, like lemon or lime.
To restore marble, remove any surface dirt and etches first. For simple dullness, buff with stone-safe cleaner and marble polishing powder. For deeper etches or scratches, wet sand with progressively finer diamond pads (starting at 100100100 grit up to 300030003000 grit), then finish by applying a penetrating sealer.
Popular cleaners like bleach, ammonia, citrus, vinegar and hydrogen peroxide are harsh on marble and will cause permanent damage. Using only a sponge with hot water for regular cleaning and a high-quality marble cleaner occasionally is enough to keep your marble countertop clean and beautiful.
No, you should not use Clorox wipes on marble. The bleach and acidic ingredients in the wipes can chemically burn or "etch" the stone, permanently dulling its finish and eating through its protective sealant.
Yes, you absolutely have to rinse Dawn Powerwash off your dishes.
You should never use the original powdered or liquid Bar Keepers Friend on marble. These contain oxalic acid and abrasives that will instantly etch and strip the polished finish off your marble. Instead, only use their specially formulated Granite & Stone Cleaner & Polish.
Acidic and citrus cleaners (lemon, citrus, vinegar) can also cause etching on marble or other stone surfaces. Common name brands like Tilex, Windex, and Lysol are very bad for natural stones. Household cleaners are often too harsh for marble. DIY cleaning mixtures often include vinegar, bleach, or soap.
No, you should avoid using Dawn Powerwash on marble. While the dish soap inside is pH-neutral, Powerwash contains ingredients like denatured alcohol and active solvents that can strip the protective sealant and dull the polished finish over time.
You can use Mrs. Meyer's multi-surface cleaners on sealed marble, but only if you proceed with caution. However, it is generally not recommended for unsealed marble, and you should never use Mrs. Meyer's Tub & Tile products on natural marble.
For general cleaning, you can use the following ingredients in your homemade marble cleaning solutions:
What Is The Safest Way To Clean Marble?
Avoid using melamine sponges (Magic Eraser) on marble countertops or tile. Although the melamine foam cleaners are generally useful, they can remove the sealant on marble and dull the finish.
To restore shine to dull marble, start with a thorough cleaning using a pH-neutral cleaner. Next, apply a marble polishing powder, buffing it in circular motions with a soft cloth. For stubborn water spots or etches, gently wet-sand the area with fine-grit (up to 300030003000) diamond pads or seek professional restoration for deep damage.
Those crystals are the foundation of granite's reflective quality. The most important minerals responsible for sparkle are quartz and mica. Quartz crystals are naturally glassy and reflective. Mica, especially muscovite and biotite, produces tiny reflective flakes that shimmer under light.
Granite Counter Maintenance
I would not recommend harsh chemicals on it. Instead, clean your counters with a neutral, mild, vegetable oil-based cleaner such as our "Murphy's Oil Soap®." Synthetic scrubbing pads can be used on granite surfaces.
Here are all the types of surfaces you can clean with Dawn® Powerwash: