Who to call when water pressure is low?

Author: Mrs. Noemie Stehr  |  Last update: Sunday, May 4, 2025

Homeowners should work with a plumber to discover the source of the leak and to see if this fixes their water pressure. Sometimes, homeowners can tell where the leak might be located by noting which fixtures have low water pressure.

Who is responsible for low water pressure?

The most common reason for low water pressure is a clogged sink aerator. However, clogged or corroded pipes, closed valves, leaks, pressure regulator problems, and issues with the water company can also be part of the problem.

Who do I call for low water pressure in my house?

This is an issue a plumber is able to assist with. Your plumber assesses your plumbing system, branch lines, and water demand to determine if bigger branch lines are able to offer better water pressure in your home.

What do I do if my water pressure is low?

6 Solutions to Low Water Pressure
  1. Clear the Clogs. One of the most common causes of low water pressure is clogged pipes. ...
  2. Clean or Replace Corroded Plumbing. ...
  3. Seal the Leaks. ...
  4. Repair or Replace Faulty Fixtures. ...
  5. Replace Pressure Regulator. ...
  6. Install a Booster Pump. ...
  7. Let Our Professionals Improve Your Home's Water Pressure.

Do you call a plumber for low water pressure?

If you're having trouble pinpointing the cause of low water pressure to just one fixture or especially throughout your entire plumbing system, it's time to call a professional plumber.

What to Do If You Have Low Water Pressure

Is it expensive to fix low water pressure?

The cost of repairing low water pressure in your plumbing system can vary depending on the complexity of the issue. Smaller plumbing repairs, which could include addressing low water pressure problems, generally cost between $125 to $350.

Can a plumber fix water pressure issues?

Thankfully, you may be able to narrow down what is causing low water pressure in your home with this helpful guide. And if you still can't pinpoint the problem, a trustworthy plumber can help diagnose and fix water pressure issues.

Why would water pressure drop in a house?

Low water pressure in a home is usually caused by clogged pipes, leaks in the plumbing system, a faulty pressure regulator, partially closed valves, corroded pipes, or issues with the main water supply line; to fix it, you can try clearing clogs, repairing leaks, replacing the pressure regulator, fully opening valves, ...

How can I get my water pressure back up?

A quick and easy way to increase water pressure is to adjust the pressure-reducing valve, which can be found in your home, usually close to your water meter. If your pressure gauge reading was low, make slight adjustments to your regulator.

How can I check my water pressure at home?

In order to do so, you'll need a water pressure gauge, and to follow these simple steps:
  1. Ensure all taps in and outside your home are turned off.
  2. Secure the pressure gauge to your outside tap. ...
  3. Turn the tap on full—it must be operating on full in order to take an accurate reading.
  4. Check the gauge reading.

Can the water company lower your water pressure?

You might also have lower water pressure if an issue at a water treatment plant briefly reduces the amount of water that your city can supply. If your water supplier is at fault, you will typically notice a sudden drop in pressure throughout the house.

Who to call for water pressure tank?

If there's no water in the pressure tank, it's time to call a plumber to service or replace the unit.

Why would water pressure be low in just one faucet?

Over time, your aerators may become clogged or dirty, which can result in reduced water pressure in your faucet. If you notice low water pressure impacting just one faucet in your home, remove the aerator and clean it thoroughly to restore adequate water flow to your fixture.

Who do I call to fix low water pressure?

Homeowners should work with a plumber to discover the source of the leak and to see if this fixes their water pressure. Sometimes, homeowners can tell where the leak might be located by noting which fixtures have low water pressure.

Who is responsible for water pressure?

The guaranteed standards scheme (GSS) sets out that water companies shall maintain a minimum pressure of water in the communication pipe serving the premises supplied with water of seven metres static head.

Who can adjust water pressure?

Changing a valve could be a bit challenging and it is usually best to seek help from an experienced, professional plumber. Once you have successfully adjusted the pressure valve or replaced the valve make sure there is no leakage.

How do I fix low water pressure in my house?

You can increase water pressure in your home by cleaning showerheads and aerators, flushing your water heater, and clearing debris from your pipes. If these DIY fixes don't work, consider calling a professional plumber.

How much does it cost to fix low water pressure in a house?

On average, water pressure regulator replacement costs $350 or between $250 and $450. You'll pay an additional $100 to $300 for after-hours, weekends, holidays, or projects with access issues. Also called a pressure-reducing valve, each valve costs $50 to $100 on average, but can hit $200 for most single-family homes.

Can a plumber fix low water pressure?

With most serious water issues like low water pressure in your house, you'll typically want to call in a professional plumbing service. If you have problems with underground pipes and fixtures only the utility company can access, you will not even be able to attempt repairs on your own.

Why do I have no water pressure all of a sudden?

One of the common reasons for a sudden drop in water pressure is the clogging of pipes. Over time, pipes can become clogged with mineral buildup, rust, or debris that block water flow.

How long does it take for water pressure to build back up?

Anyway, when changing from City Water to Normal, it can often take a minute or two for pressure to build.

Do plumbers check water pressure?

If you need help testing or adjusting your water pressure, or have any other problems in your household plumbing, contact an expert plumber today.

How much does it cost to repair water pressure valve?

For a standard PRV replacement, expect to pay around $400 to $800. This includes the new valve, plumber fees, permit charges, and any additional materials or labor.

Why is my shower pressure suddenly low?

Sure, it's an annoying issue but it can also signal a larger plumbing problem. The cause of low pressure in a shower could be any of several issues such as a clogged showerhead, a worn-out mixing valve, closed valve, leaking pipe, or even a faulty water heater.

Previous article
How do you make homemade mosquito repellent with Dawn dish soap?
Next article
Why do pipes make noise when water is turned off?