If you are unable to locate the frozen area, if the frozen area is not accessible, or if you can not thaw the pipe, call a licensed plumber.
Burst pipes will need to be replaced and a plumber is best equipped to handle the job. The average hourly plumber rate is around $330, depending on where you live and the size of your job. As long as your frozen pipes haven't burst, a plumber will likely charge a flat fee of around $100 to thaw them out.
If your pipes freeze:
If you turn on your faucets and nothing comes out call a plumber. If you detect your water pipes have frozen, turn off the water at the main shut-off valve in the house. NEVER try to thaw a pipe with a torch or open flame.
Apply heat to the frozen area
There are several ways to do this. You can wrap the pipes in thermostatically controlled heat tape, or you can use an external heat source such as a hair dryer or space heater. Do not use a propane torch as this can damage the pipe and create a fire risk.
And once the temperature outside dips below 32F, unprotected pipes are at a greater risk of freezing and potentially bursting. That said, it's still possible for your pipes to thaw without bursting. The key is to release the pressure and allow the pipes to thaw slowly.
The job goes more quickly by pouring hot water or a mixture of vinegar, baking soda and salt water down the drain. Space heaters, hair dryers and heating pads are highly efficient tools for unfreezing a drain pipe. If a frozen drain line ruptures, turn off your home's main water supply.
Thaw Frozen Pipes
Turn off the water immediately at the main shut off valve. Open the faucet so that water will flow through the pipe once the area is melted. This will help melt more ice.
If you are unable to locate the frozen area, if the frozen area is not accessible, or if you can not thaw the pipe, call a licensed plumber.
A foul smell from the drain or faucet is a less-obvious warning sign. Odors are unable to filter out of the frozen pipe and instead are forced back into the home's faucet. No water or a slow trickle when a faucet is used. Whistling and banging coming from pipes, or strange bubbling sounds when you flush a toilet.
Pipes typically burst when exposed to extremely low temperatures for an extended period of time (anywhere from 1-3 days depending on temperature). This is especially true for pipes located on exterior walls.
Frozen Pipes Shouldn't Be Allowed to Thaw on Their Own
The laws of physics say water always takes up more volume as it freezes. When your pipes can no longer contain the expanding ice, they will burst. This not only breaks the pipes and makes your plumbing system unusable, it may cause serious water damage as well.
If you run into any problems unfreezing a pipe, be sure to give your Roto-Rooter plumber a call. Roto-Rooter is equipped with professional grade pipe thawing equipment that can be employed before a pipe bursts and causes water damage.
Be prepared to wait at least 30 to 60 minutes. When the pipe begins to thaw, water will start flowing at a faster rate through the open faucet. Even after the water pressure is fully restored, it's recommended to keep the heat on the pipe to ensure the ice in the line is completely melted.
Should You Drip Faucets In Cold Weather? Yes, according to the Red Cross, the short answer to that question is you should.
If you suspect that your outdoor faucet is frozen, there are a few ways to tell. First, check the temperature of the faucet; if it is cold to the touch, this could be a sign that it has frozen. Additionally, if water isn't coming out when you turn on the tap, this could also indicate freezing.
If possible, locate the section of pipe that is frozen and thaw it yourself using gentle heat (slowly warm it up). If you heat the pipes up too quickly, they can crack or melt due to the quick change in temperature! Try wrapping an electronic heating pad around the pipe, heating the area with a hair dryer, or both.
A professionally prepared lease agreement will often require the tenant to keep the unit heated to 60 degrees. If the pipes freeze, then under this lease agreement, the tenant may be responsible not only for their personal property but also the damage to the leased premises.
If your pipes have been frozen for more than two days, shut down your home's water supply. Locate the frozen length using touch, sight and sound. Make sure the pipe hasn't burst, and open indoor faucets. Unfreeze the pipe using a hair dryer, heat tape, space heater or heating pad.
Can You Flush the Toilet If Your Pipes Are Frozen? In most cases, no. Attempting to do so can cause pressure buildup in the pipe and lead to bursting. Additionally, flushing a toilet with a frozen pipe can result in unsanitary conditions due to a lack of proper drainage.
Pipe-thawing options: There are several things you can do to thaw your home's pipes. Here's a list: Probably the most popular and safest pipe-thawing option is to use hot water. Wrap and secure heavy towel or burlap bag around pipe to concentrate and hold heat against it.
When should I call a plumber if my pipes are frozen? As soon as possible, Garton said. Pipes are more likely to burst the longer they stay frozen, said Garton. He said that the likelihood of your pipe bursting depends on the material.
Thawing Frozen Pipes
While you wait, reduce water pressure by opening all the faucets inside the home one-quarter turn. Water will begin to trickle out, helping the ice to thaw. Remember to close all faucets after full water pressure is restored.
Turn on all faucets: Checking each faucet in your home will help you narrow down your search. The faucets that have little or no water pressure likely have a frozen pipe in their supply line. If every faucet is showing low water pressure, the frozen pipe may be near the water meter.