Both CLR and Lime Away are excellent tools for cleaning your kitchen and bathroom. Lime Away's spray bottle makes it the easier to apply option. CLR seems to have a slight edge in how effectively it removes certain stains. Either will be far more effective than any all-purpose cleaner with minimal scrubbing needed.
Quickly and easily dissolves and removes tough calcium and lime deposits. Can be used on surface rust stains from bathtubs, toilet bowls, sinks, glass, chrome, fiberglass, stainless steel appliance exteriors, humidifiers, dishwashers, washing machines and showerheads.
DO not use CLR on natural stone or marble, terrazzo, colored grout, painted or metallic glazed surfaces, plastic laminates, Formica, aluminum, steam irons, leaded crystal, refinished tubs or any damaged or cracked surface. CLR may etch older sinks, tubs and tiles. CLR is corrosive.
Unlike the leading all purpose cleaner, LIME-A-WAY® is specially formulated for cleaning hard water stains, giving you the upper hand when cleaning the bathroom. LIME-A-WAY®has ingredients that eliminate hard water build-ups and limescale deposits. Not only that, but they allow you to do so scrub-free.
Lemon Juice Method
To use this method, cut a lemon in half and rub it over the affected area. Alternatively, you can squeeze the juice of a lemon into a spray bottle and spray it onto the limescale. Let the lemon juice sit for a few minutes, then wipe it away with a damp cloth.
Any type of vinegar can be used, such as apple cider vinegar, red wine vinegar, white wine vinegar, etc. However, keep in mind that vinegar is usually more potent and doesn't have the subtle sweetness of limes, so I recommend starting with a 1:2 substitute of vinegar to lime juice and adjusting to your taste.
Lime-A-Way cleaner with Turbo Power destroys Lime, Calcium & Rust. Removes the toughest limescale in seconds without scrubbing! Removes lime, calcium and rust stains caused by the natural minerals in your water. Cleans the toughest hard water build-up so that surfaces stay cleaner for longer.
3. Use CLR for Limescale. Calcium, Lime, and Rust Remover, or simply CLR, is a common cleaning agent for hard water stains and rust. Its heavy-duty nature is quite effective at removing hard water stains, including limescale.
Apply vinegar or lemon juice directly onto a cloth and scrub the limescale until it comes away. Alternatively, mix one part lemon juice or vinegar to four parts water. Put the solution in a spray bottle and spritz it onto tiles and plugholes. Leave this to soak for up to an hour for stubborn scale deposits.
CLR or Lime Away? An acid-based cleaner is the best way to remove water deposits. Vinegar and lemon juice are two natural alternatives, but they just don't work as quickly and effectively. CLR uses similar ingredients to Lime Away.
Fragrance free- safe for all pipes and drains! Part of the EPA's Safer Choice Program recognizing the product as a safer alternative to traditional chemicals, and contains no phosphates and is Septic Safe.
CLR Calcium Limescale and Rust Remover is the perfect solution. Before you get started, always use gloves and check if CLR is suitable to be applied on the material you are trying to clean.
spraying the effected area with undiluted white vinegar. creating a mix of white vinegar and borax to scrub affected surfaces. lime water and water in a 50:50 ratio. Baking soda.
Hydrochloric acid is much stronger than acetic acid, for example, and therefore tends to remove scale faster. Weak acids such as acetic or citric acids may be preferred, however, where damage to the substrate is to be minimised.
A: LIME-A-WAY can be used to clean many surfaces that come into contact with hard water, such as the bathtub, bathroom tiles, shower doors, sinks and toilet bowl. In general, the product should be used on hard, non-porous surfaces.
Permanent Solution: Install a CWS Water Softener
A CWS Water Softener not only protects a home from the damaging effects of hard water but also removes the existing limescale that has been building over the years in the pipework.
Hard water stains can look pretty unsightly if they are not tackled, making the toilet looking dirtier than it actually is. You can also spray WD 40 in the bathroom or sink to deal with the same issue. It will get rid of hard water stains and limescale and make your toilet look much brighter.
Removing Hard Water Deposits From Faucets
Use vinegar to help loosen the hard water film and buildup before scrubbing. Soak a clean rag in vinegar and drape it over the faucet, making sure there is direct contact with all of the hard water deposits. Let the rag sit for at least 30 minutes; an hour is better.
Professional window cleaners like Window Genie are trained and experienced in this battle. Window Genie uses a polishing paste specifically designed to fight the minerals that create these stains. The paste is applied to a non-abrasive cleaning pad and the window is lightly scrubbed.