For best results, you want the thermostat centrally located. This is a part of the home that you frequently use rather than tucked away in a hall. The thermostat should be positioned at a height of about 52-60 inches. Since heat rises, if the thermostat is higher than that, the readings will tend to be too warm.
The thermostat should be in a neutral area on an interior wall away from doors, windows, and heat sources. Across from the pantry might be the best spot for it. The interior wall near the living room can work, but people gathered in that area will generate heat and through it off and the fireplace will too when in use.
Placing the thermostat in a central area will give your device the best measurement of your home's average temperature. Main rooms are connected to many areas of the house, experience consistent airflow and are less affected by outdoor temperatures.
Location within a room
Heat circulates around rooms naturally, so we'd recommend placing your thermostat in a central position and around 1.5m off the ground for the most balanced view.
It does not “know nor care” what temperatures are in other rooms. As a general rule, the thermostat should be in the most centrally located part of the heated space where it is NOT influenced by excessive sunlight or directly influenced by a SUPPLY register blowing on it.
For example, don't place it above air vents, near windows and doors, or in any spot that receives direct sunlight. Placement in these areas can cause false readings, which may cause your heating and cooling systems to run unnecessarily, increasing energy consumption and costs.
We would not advise putting the thermostat in the coldest room as this would not be a true reflection of the temperature of the rest of the house. You want an average reading for it to work efficiently so placing it in the coldest part of the house would be an extreme cold air temperature zone to avoid.
In The Hallway
The main goal of your heating and cooling system is to keep your family comfortable, so it makes sense that the thermostat be in a place that accurately represents the “real feel” air temperature of your home.
The ideal thermostat location is an interior wall, ideally near the center of the house. When considering your thermostat location, it's also smart to keep in mind which rooms people use most since these are the rooms where you want the temperature to be the most comfortable.
The placement of your thermostat can significantly impact the overall efficiency of your HVAC system. Certain heating or cooling problems result from a poorly located thermostat rather than the actual system. Quality Heating, Cooling, & Plumbing knows how frustrating it can be to have a malfunctioning HVAC system.
A sensible solution for a typical house is to place the thermostat on the wall in the hallway or largest room downstairs. It should be far enough away from any windows and doors to prevent sudden blasts of cold air triggering the sensor. Same applies for any heat sources.
Moving Your Thermostat
If your thermostat isn't in the right place, it is possible to move it to a new location. However, the amount of work that takes depends on how far away you plan to move it. The reason is that there's a set of control wires running from your HVAC system to the wall where the thermostat resides.
Thermostat Operation
The smaller the difference between the indoor and outdoor temperatures, the lower your overall cooling bill will be. You can easily save energy in the winter by setting the thermostat to around 68°F to 70°F while you're awake and setting it lower while you're asleep or away from home.
come and move a thermostat it will cost between $200-$400 depending on how long the new wire has to be. The normal labor rates vary per region so it is between $75-$90 dollars per hour and it will probably take all of 2 hours to pull a new wire and rewire and mount the thermostat.
Since 72 degrees is generally agreed upon to be an ideal indoor temperature, most people would probably still feel comfortable setting their AC units slightly higher than this, perhaps at around 75.
Quick answer: The ideal house temperature is room temperature, which ranges from 68 to 78 degrees F, though this may vary from season to season. In winter, the average room temperature is generally 62 to 68 degrees, whereas in the summer, the average temperature is 72 to 78 degrees.
It turns out that the best indoor temperature for your home during the summer months is 78 degrees, according to the U.S. Department of Energy. If that temperature falls outside your comfort level, there are several ways to modify how your home feels without causing your energy bill to spike.
In a frequently used room
We all want the rooms that we use the most to be at the most comfortable temperature. So it makes sense to install the thermostat in a frequently used space like the living room so that it is just the right temperature all year round.
Dirty air filter—A dirty filter restricts airflow, not letting your home get enough cool air. Closed vents—Closed vents in rooms can cause them to be hotter than other rooms. Open windows—Your conditioned air can flow out of open windows, leaving uneven temperatures in your home.
Every master bedroom deserves a thermostat!
This declaration is a more powerful mantra than it first appears. Consider a simple two-zone system. Let's say you put one thermostat in the master bedroom and another in the most used room in the home.
For example, you'll want to avoid installing your thermostat near windows or doors, or by heat sources or in direct sunlight. You'll also want to avoid putting lamps or TVs near your thermostat, since they release heat that could impact the device settings, according to the US Department of Energy.
How Low is Too Low to Set My Thermostat? If you're going to be leaving your home or traveling for the winter, it's best to keep your thermostat set no lower than 55 degrees. If you don't, you could risk having your pipes freeze over.
A setback temperature protects the temperature in your home from dropping too far if you're out for longer than expected. Getting the setback temperature right for your home might require a bit of experimenting, but a good starting point is 16 degrees.