Cold air returns should be strategically placed throughout your home. You'll typically find vents or grills in every room or at least in every area served by your
They are usually located in central, larger rooms to more efficiently pull air from the home and into the system. Return air vents are often located on a wall, rather than the floor or ceiling.
Cold air return vents should typically be placed lower on the walls or the floor since cold air naturally sinks. This placement helps capture the cooler air faster and more efficiently, allowing it to be recirculated through the HVAC system for heating or cooling.
Does Every Room Need Air Return Grilles? While it is a myth that air return grilles are required in each and every room in the house, it is definitely necessary to have more than one of these grilles installed at strategic places in the house. The most important place to have these would be the bedroom.
Ceiling vents do a better job cooling and floor vents do a better job heating. If your priority is cooling, put your HVAC in the attic and ducting and heating vents in the ceiling. If you prioritize heating, put the HVAC and vents in (or below) the floor. This principle works for return heating vents as well.
Up High: having an air return higher up on a wall will be better at sucking in hot air that rises. Making it more efficient at transferring this hot air back into your system to repeat the cooling cycle. Down Low: if you have your air return lower on your wall it will function better as a cold air return.
Cons Of Ceiling Vents
Remember, heat rises, so if it starts at the ceiling, it has nowhere to go but up. Exposes HVAC system to unconditioned spaces – Attics tend to be dusty and prone to extreme temperatures, adding wear and tear to the equipment and increasing heat transfer loss.
Symptoms include weak airflow and uneven cooling or heating throughout your home, with some rooms feeling much cooler or warmer than others. Homeowners should regularly check vents for consistent airflow. If you notice a significant drop in air pressure or uneven temperatures, it could indicate return air issues.
1. Openings shall not be located less than 10 feet (3048 mm) measured in any direction from an open combustion chamber or draft hood of another appliance located in the same room or space. 2. Return air shall not be taken from a hazardous or insanitary location or a refrigeration room as defined in this code.
If there's not enough return air, your living room can be 10℉+ warmer or cooler than, for example, the bedrooms. Not enough return air in summer can cause rooms close to the central unit to be cooler and those farther from it to be warmer. In winter, rooms farther from the furnace can be too cool.
One per room is ideal, but placing two or three in central locations can provide enough air circulation to maximize the energy efficiency of your HVAC and optimize indoor air quality, so your family stays healthy. If your home has multiple stories, you should have at least one return air vent per floor.
Avoid blocking air vents with pillows, furniture, plants, or pictures. When the air vents are blocked it means that heated or cooled air needs to squeeze by what is blocking it to reach the rest of the room.
While return vents don't always require filters, adding them provides additional filtration, improving indoor air quality and keeping dirt and debris out of your system. However, there are pros and cons to consider.
In most cases, they are positioned away from windows and exterior doors to avoid drawing in outdoor air directly. In multi-story homes, you'll find cold air returns both upstairs and downstairs to maintain balanced air pressure and efficient circulation throughout the house.
Hot air rises and cool air sinks. Therefore, opening the right return vents in the summer and winter significantly improves the distribution of air by your forced-air system. You'll also enjoy more even heating and cooling throughout your home. In the summer, open your high returns and close the low ones.
Return air ducts must be sealed and unobstructed — Sealing return air ducts is just as important as sealing supply ducts. Sealing all duct section connections with mastic, a specialized rubbery sealant, or with metal tape prevents air leaks.
In fact, when installing return ducts it is always advisable to avoid putting them in bathrooms or kitchens. This would just simply cause the heating and air system to circulate cooking odors and moisture throughout the system.
There isn't a hard rule, but ideally you want the supply and return to be on opposite sides of the space. Five feet is pretty close - you'll definitely be pulling some of the conditioned air through the return before it has a chance to permeate the space.
However, most HVAC contractors use a rule of thumb to determine the number of air vents needed. For example, for a standard residential HVAC unit, you'll generally need one supply vent and one return vent for every 100 to 150 square feet of living space.
Cavities (or interstitial spaces) within walls are also sometimes used as supply- or return-air pathways.
By installing more return vents throughout your home, they can trap the air and remove it, improving air circulation. A drawback with this method is that your ductwork needs enough space to support additional vents. Smaller homes that can't add more vents need to pursue other options.
You can usually spot return vents on your walls, ceiling, or floors. Look for a white grille without shutters to spot an air return vent. These vents will typically integrate seamlessly into your home.
It's important to remember that static vents serve a purpose, especially in older homes. They provide ventilation to indoor spaces, help regulate indoor temperatures and prevent the build-up of excess moisture in wall cavities and rooms which can lead to mould outbreaks and damage to building materials.
Air Ducts Near the Ceiling Are Most Effective
Many people don't realize this because it is common to see air vents located near the floor in older homes. With vents near the floor, however, furniture often ends up blocking vents and causing the air to get trapped.
From an aesthetic standpoint, facing the grates upward will make the fixture appear sleek and clean (since you won't be able to see into the wall).