Make a mark directly in the middle of the wall above the countertop. This is where you will center the first tile to start the backsplash project. If the countertop is tiled, locate the tile that is in the middle of the counter and use that as your starting point.
It all starts with the alignment of your upper and lower cabinets. Hopefully they are lined up perfectly, as they are above, where the splash can run from the top edge of the countertop to the underside edge of the upper cabinet.
Step 1: Lay Out Your Backsplash Tile Design
If you are doing a straight wall—like my laundry nook, it's best to start at the center and work your way outward. However, if you are doing a corner, it's better to start in the corner and work your way out.
Preparing your kitchen for tiling
Next, place a tile against the lowest point of the base you're working to and draw a level line. Fix a baton along this line to hold your first row of tiles, and draw a vertical line at one end of the wall to allow you to check that your tiles are in line as you tile up the wall.
Some like to end it where the upper cabinet ends. Others like to stop at the edge the counter. And still, others want to take it to the end of the wall. Whichever looks best for the kitchen is the best place to end the backsplash.
A standard backsplash is typically 4 inches high from the countertop. A full backsplash comes as high as you need, most homeowners have it all the way up to the height of the kitchen cabinets.
When tiling a kitchen backsplash behind a stove, the best practice is to continue the tiles down the wall a minimum of one full course below the countertop height. This is done in order to prevent any visual discontinuity so you cannot see any untiled wall surface.
If you're in a kitchen, and you're doing the countertop-to-upper-cabinet-18”-high-backsplash, it's best not to wrap that around to the side wall if you don't need to. As I always say... Transitioning materials on an inside corner is always best.
The bottom of the upper cabinets, the bottom of a window, or the range hood are common lines to use as a guide for where to end your backsplash. Too many lines can make the room feel disjointed; continuing existing lines keeps the look unified and clean.
Backsplash height should be all the way from the Countertop to the bottom of upper cabinets. I strongly suggest designing it like this, otherwise, it will look outdated like on the bottom image. Also, it protects water spillage much better if it is made all the way up to upper cabinets.
Tile backsplashes need a 1/8-inch expansion gap around the perimeter where the tile meets the cabinets and countertops.
Backsplashes should go behind the stove and between the countertop and the bottom of the upper cabinets, but not behind the fridge. The backsplash should be wherever there will be food and water splatter, but not where it can't be seen.
In a kitchen with many items at different heights, I would still use the bottom of the cabinets as a main stopping point, with possibly a little exception at the range for a taller backsplash up to the hood. Ending at the windows would leave an awkward sliver of space below the cabinets.
When you coordinate your design elements and architectural features, colors don't have to match, but they should coordinate. Your backsplash tile doesn't have to mirror the color of your countertops, but it should blend, harmonize and support the rest of the features in the room.
A countertop needs to be installed before the backsplash is put on the walls above the countertop.
Leave the Edge Alone
Complete the edge by applying a piece of painter's tape to the wall next to the tiles. Squeeze a thin line of caulk down the outside edge of the tiles where they meet the wall. This blends the tiles into the wall, giving it a clean, finished look.
Here's how you do it: Install the first four tiles in a pyramid: three on the bottom and one on top. Every subsequent row is a process of draping over the pyramid, back and forth. Begin your first drape on either the right or left side, and bring it up, over, and down the other side.
Hi there, you need to tile after the kitchen has been fitted to ensure the tiles sit correctly on to the worktop and you have the wall unit as your finishing point, otherwise the kitchen fitter will not be able to put a mason mitre joint and he would also struggle trying to get the worktop bang on with the tiles.
When tiling the wall around a bath, start from the bottom and then move towards the top. Cut tiles will be less visible at the top. Also, if you start tiling from the top of the wall, tiles may slip and fall because of the weight. If you don't tile from floor to the ceiling, it is easy to end with a full tile.
The short-and-fast answer to the question, “Do I need a kitchen backsplash?” is: No. You don't need one. Strictly, speaking, at least. You don't need a backsplash in the same way you need a sink or a countertop in your kitchen.
Now here you got the answer to your question Can I tile over painted drywall? The answer is, Yes you can tile over the painted drywall as well as how to put tiles and which precautions should you take while putting the tiles over the painted drywall. Now you can make your drywall more beautiful than earlier.