After a swimming pool installation, or when it is replastered, you'll want to brush much more often. Brush it twice a day for the first two weeks and then move to a standard schedule. Every time you add chemicals to fix the pool's balance, it's important to brush it. It helps the chemicals dissolve evenly.
Brushing thoroughly 1-2 times per week will prevent these materials from having the time to create a stain. Brush to Prevent Algae: Every pool can grow algae, but plaster, quartz, and aggregate finishes are more susceptible.
Before you start pouring shock in the pool, the first step is to brush the sides and floor of your pool to loosen all the algae. Doing this breaks the skin and allows the pool shock to more easily kill the algae. Once you've done this, it is important to make sure you have the proper pH level in your water.
It's an absolutely vital step in the pool cleaning process, but initially, it feels like a step backwards. Brushing is very effective to kick up settled particles so that the skimmer and drain have an opportunity to collect them.
BRUSHING THE POOL
It is recommended that the pool be brushed with a standard 18-inch nylon bristle pool brush at least twice per week. The entire process usually only takes 10 minutes and is well worth the time and effort.
Brushing helps to dissolve and disperse the chemicals so they won't etch, stain or scale the surface. Stain or Algae Removal: Stains and algae cannot be removed by mere pool chemicals alone, there must be some physical persuasion.
What happens? They stain! The dirt gets embedded in the fabric and the jeans take on the color of the dirt. The same is true of your plaster, pebble, quartz, hydrazzo and various other finishes: if you don't run a brush over the surface regularly it will stain.
Remember: vacuuming your pool regularly will help keep your pH balanced easier and more controlled. Skim your pool for debris, such as leaves, bugs, etc. and be sure to check your skimmer and empty that regularly as well.
Start at the shallow end and then work your way to the deep end of the pool. Once you've vacuumed it once, you'll need to grab a brush and scrub away at your pool's floor. Then vacuum it again. Repeat this until the bottom of your pool looks clean.
The last thing you want to do is vacuum algae manually, which will contaminate your filter. Your pool will not clear up. In fact, the chances of your problem getting worse are very high. You'll also need to vacuum to waste when there is a large amount of debris or leaves in the pool, usually at opening.
Shock is chlorine, in a high dose, meant to shock your pool and raise the chlorine level quickly. Chlorine tabs (placed in a chlorinator, floater, or skimmer basket) maintain a chlorine residual in the water. You do need to use both tabs and shock.
If dirt is reappearing at the bottom of your swimming pool after you've vacuumed it your pool's filter may be working poorly. Pool filters often work poorly because they're in need of cleaning. If you have a sand filter for your pool you need to make sure that the sand is sharp and freshened up.
Dolphin pool cleaners are safe to use for the general public, however, (for safety precautions) we do not recommend swimming while the cleaner is in use.
The rule of thumb for pool maintenance is to run your pump for eight hours per day.
What's important for you to know: You shouldn't swim in a pool that's green until you test the chemical levels, like the officials in Rio did before the diving event began. It's the balance of things like chlorine, pH, and alkalinity in a pool that keeps it sterilized.
But is it safe to swim in a pool with algae? Whether mild or severe, it isn't recommended. Significant amounts of swimming pool algae welcome a breeding ground of harmful bacteria that feed on algae. These bacteria pose health risks to swimmers, most commonly resulting in a skin rash.
Chlorine is added to the water to kill germs. But it does not work right away. If used properly, free chlorine* can kill most germs within a few minutes. CDC recommends pH 7.2–7.8 and a free chlorine concentration of at least 1 ppm in pools and at least 3 ppm in hot tubs/spas.
The pool must be maintained and taken care of regularly; if not, it may lead to various accidents, diseases, and infections. Maintaining the cleanliness of your pool is just one of the many ways of swimming pool care. It is recommended to have your pool cleaned at least once a week to keep it clean and uncontaminated.
Scrub at the water line with a brush appropriate for your pool liner and a chlorine-based liquid cleaner. Chlorine-based cleaner is usually enough to clean scum from the water line. Scrub with a tile brush if you are cleaning tile walls, or a sponge if cleaning a line. Nylon brushes work for tougher spots.
In general, it's a good idea to vacuum your pool once a week. You should also vacuum your swimming pool any time you notice large amounts of debris, dirt, or leaves on the floor of the pool (for example, your pool may need vacuuming after a heavy storm).
Brush the pool twice a day for the first two weeks. This opens the pores of the plaster to allow proper curing as well as removes any loose plaster dust from the surface. You may notice plaster dusting when you brush and the water becomes cloudy.
After Shocking Your Pool
It is safe to swim once your chlorine levels are around 5 ppm or after 24 hours. It is always best to test first!