The best time to run your pool pump is during the warmest hour of the day; however, keep in mind that this means you will have higher energy consumption, which may lead to an increase in your electric bill. If you want to save on your energy costs, you can run your pool pump at night to avoid peak hours.
Why is it Best to Run a Pool Filter Pool During the Day? Running your pool pump and filter during the day is ideal because this is when your pool is most prone to algae bloom, contaminants and chlorine loss. When the sun is out, the UV rays from the sun burn up the chlorine inside your pool.
To make this process simple, it easier for homeowners to follow this basic guideline: for every 10 degrees of outdoor temperature run your pump for one hour. So if the average temperature is 60 degrees, run your pump for 6 hours. If the average temperature is 80 degrees, run your pump for 8 hours.
On average, you should run your pool pump around 6-8 hours per day during winter and 10-12 hours per day during summer. Note that you need to run your pool pump longer during summer because algae grow more in warm temperatures.
The rule of thumb is generally 8 hours, although it could be anywhere from 6-12 hours, depending on your pool's size. Each pool is unique, so to keep your pool pump efficient and effective, you need to figure out exactly what your pool's turnover rate is.
In dry and/or windy conditions, the evaporation rate of the pool increases. Therefore, it is generally beneficial to have a transparent or bubble cover on during daylight hours. In warm, humid conditions the evaporation rate decreases. In this case, it may be more beneficial to leave the cover off during the daytime.
Chemicals that you add to your pool while the water is circulating don't need to be recirculated; they will stay mixed even if you don't pump the water continually. Although it's generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time.
One of the most significant consumers of energy in homes with swimming pools are pool pumps, which keep pools clean by circulating water through filters. Pool pumps can consume 3,000 to over 5,000 kWh per year.
Keep the pump and filter on while you are away.
Set it before you leave to ensure the pool filter system will run at least 8 to 12 hours per day.
Portable household generators are normally 110V but there are some that will generate 240V. Most pool pumps are wired 240V in this market. Adapting the wiring to hook up a 240V generator to a pool pump should be done by an electrician only. This is a very uncommon practice.
Many of the INTEX pump/filters are NOT UL rated and you should not swim with them plugged in. They do have one or two that are UL rated and can be left on while swimming. Just about all other pool equipment brands can be used while you are in the pool when properly installed.
For energy efficiency best time to run the pool's filtration system is during off-peak hours when the electricity demand is lower. This time is typically between 8 p.m. - 10 a.m. Also, to warm the pool you can run it during the day, to cool it at night.
The most common reason pool water turns green is due to algae growing in the water. Algae can grow rapidly, particularly in hot weather, which is why it can surprise you overnight during the warmer months. This generally comes down to an imbalance or lack of chlorine in the water.
Evaporation occurs year-round, but your pool loses water at a faster rate in summer due to the extra heat. A pool cover will block excess heat from reaching the water and also trap moisture, so it doesn't evaporate into the air. This can help reduce your water bill as you won't have to refill your pool as often.
Air bubbles in the pool cover act as an insulator in a similar way that your thermos would keep water warm. A pool cover will, therefore, keep your pool water warmer for longer.
When preparing your pool for a storm, leave it uncovered. Installing any kind of cover across the pool will not do much to protect against dust and contaminants because storms often bring strong winds and heavy rain that can cause the cover to lift off your pool.
Chlorine is degraded by sunlight, so there is a larger demand on the chlorine residual during the day. When the pool pump is operating, the circulation in the pool disperses the chlorine throughout the pool.
The best time to heat your pool is during the day at least several hours before you plan on using it. The risk of running your pool pump overnight is that the outdoor temperature might be too low for the pump to efficiently warm your swimming pool.
If your pool pump manufacturer has declared your pump is rain safe, you can leave it on in rainfall. Nevertheless, during a thunderstorm, it is highly recommended that you switch off and unplug your pool pump to prevent any costly and irreversible damages to your pool equipment.
Every pool must turn over at least once a day, so most pool pumps should run approximately 8 hours a day. But here's the thing: you don't have to run your pool pump consecutively. You can choose to run it for three hours in the morning before you leave for work and another 5 hours in the evening.
As a guide to running circulation, you should aim to "turn” the full volume of pool water through the filter cartridge once per day. Typically in most splash pools, using standard equipment, this is 4 hours per day (that the pump should be turned on).
A 4000 watt rated generator should suffice. You can get more accurate if you use the actual numbers from the motor nameplate though.
A generator with a rating of 4,000 watt should suffice.
If you need to know the electrical requirements for your inground pool, here is a list of common pool equipment and the approximate volts and amps required for each: Pool Pump: 240v, 10amps. Salt Water Chlorinator: 240v, approx 5-8 amps.