Stripping wire insulation can be done with a wide variety of tools and machines. You'll find a handheld cable stripper at your local hardware store for a very reasonable cost. On the other hand, a mechanical cable insulation stripper costs thousands of dollars.
Currently I use a radial stripper to remove outer jacket, pair of Klein Scissors to cut rip cord. Sometimes I use the serrated portion on back side of Scissors to strip and expose copper. Other times I use a pair of Klein wire strippers.
Effective Removal Techniques
The removal of loose-fill insulation, such as cellulose, fibreglass, or mineral wool, is best accomplished with a specialised vacuum.
A wire stripper is a small, hand-held device used to strip the electrical insulation from electric wires.
We recommend using a vacuum specialized for removing loose fill insulation. It's more effective and saves time and effort. Follow the manufacturer's instructions to set up the vacuum and make sure all parts are secure and fastened in place. Position the vacuum hose properly and turn on the power.
Wire strippers are the most efficient and safe tool for removing insulation from electrical wires. These specialized pliers feature notched jaws designed to cut through insulation without damaging the underlying wire. Most wire strippers can handle a range of wire gauges, typically from 10 to 22 AWG.
Place the wire you wish to strip on a flat surface. Use one hand to hold the knife and one to hold the wire. Place the knife on the exact spot you wish to strip. Gently roll the wire and let the blade remove the insulation sheathing.
A pocket knife can do the job, or a wire cutter and a steady hand. The key is cutting the insulation without nicking the copper. With a knife you can score around the insulation and then bend the wire right there—it will usually crack through the insulation and let you pull it off.
The preferred method for stripping wire is by use of a wire-stripping tool. The hot-blade stripper cannot be used on such insulation material as glass braid or asbestos. An alternate method for stripping copper wire is with a knife. A knife is the required tool to strip aluminum wire.
Wire Stripping Pliers, Aluminum Cable Cutting Tool, for peeling a cable with multiple conductors and multiple layers of insulation.
PG cable stripping pliers are a part of the Cable & Jointing Preparation Tool range manufactured by Alroc – the cable jacket or sheath stripping pliers are used by cable jointers to efficiently remove the PE, PVC, PR or rubber sheath from LV, MV and HV cables.
The thing to understand is that insulated tools aren't just regular tools with some extra rubber on the handles or generic coating on the tool end. They are designed end to end to protect workers from electrical shock up to 1000 V ac and 1500 V dc. They provide this protection in several ways.
Do I Need a Cable Stripper or Will a Wire Peeler Work? That's a trick question! Whether you know it as a wire insulation remover, a wire stripper cutter, or a cable insulation removal tool, all of these cable insulation stripping tools perform the exact same function: removing insulation from wire or cable.
A wire stripper is a small hand-held tool that is used to remove the insulation from electric wires. These portable hand-held tools are extremely popular among electricians and even DIYers for removing the insulation to replace or repair the wire.
Wire strippers are used to remove the insulation from electric wires to make contact. There are two primary types: manual and automatic.
One of the best wire strippers is a utility knife, such as the Slice® 10550 Manual Utility Knife, and your own two hands, as demonstrated in this video. Using our utility knife, with its finger-friendly® blade edge, gives you a nice, clean cut without any damage to the insulated wires inside the cable.
Use the correct pliers or wire cutters for the job. Proper use of side cutting (lineman's) pliers: Many applications, including electrical, communications and construction work. Use to grip, splice or cut wires and strip insulation.
Asbestos insulation comes in many forms and can look loose, lumpy, and fluffy like wool or hardened like corrugated cardboard or pebbly, and has a gray, gray-brown, or silvery gold color.
To remove spray foam from a painted surface, the first step is to use a scraper or blade to remove spray foam from the surface as much as possible. Then, get a rag damped in mineral spirits or acetone and clean the painted surface with it to remove the remaining spray foam residue.