Chlorine is used to kill germs and bacteria in pool water, so it plays an important role in keeping the water clear. The pool's pH level, which measures how acidic or alkaline the water is, influences how effective the chlorine is in keeping the water clean.
Baking soda, also known as sodium bicarbonate is naturally alkaline, with a pH of 8. When you add baking soda to your pool water, you will raise both the pH and the alkalinity, improving stability and clarity.
Short answer: yes. Longer answer: it depends on the formulation. The label on every bleach bottle should tell you the ratio of sodium hypochlorite (and available chlorine) in the bottle to everything else. A higher percentage is generally better, as you'll need to use less bleach to treat your pool.
No, you cannot use the liquid dishwashing soap at home to clean your pool.
Shock is liquid or granular chlorine. You should add one gallon (or one pound) of shock per 10,000 gallons of pool water every week to two weeks. During hot weather or frequent use, you may need to shock more frequently.
I think the answer to your question is about 3-6 days. The problem is that the chlorine that you need to keep the bacteria in check is used up more quickly as the temperature rises, the activity increases, and as sweat and other body stuff is put into the pool.
Dichlor is perhaps the most “best of all worlds” chlorine sanitizer. It is typically found in concentrations of 60-65%, which is comparable to cal-hypo. It is a powder sanitizer, which makes it easier to spread or broadcast around the pool than chlorine tablets.
How Often Should I Shock My Pool? Shocking your pool regularly will help to keep the water clean and free of contaminants. You should aim to shock your pool about once a week, with the additional shock after heavy use. Some tell-tale signs that your pool needs to be shocked are cloudy, foamy, green, or odourous water.
Tips for Adding Start-Up Pool Chemicals
Add one chemical at a time, using a pool brush to distribute. Run filter pump while adding chemicals to circulate. Re-test the pool water after 8 hours of filter run time. Add chlorine shock when the sun is not directly overhead.
You can use OxiClean's Versatile Stain Remover to clean the tiles surrounding your swimming pool. However, OxiClean does not recommend using this product to clean your swimming pool or using the OxiClean Versatile Stain Remover as a substitute for pool chemical disinfectants.
Things You'll Need
Accidentally dropping detergent or a bar of soap in your pool can be disastrous as soap bubbles form and the pH of your pool gets thrown off balance. Before your pool can return to normal operating condition, the soap needs to be completely removed.
Baking soda can work wonders in a pool. Baking soda can: Help to clear cloudy water and restore the sparkle. Spot-treat algae.
Household bleach, Clorox and liquid chlorine can all be used to sanitize a pool. They are all types of chlorine. Household bleaches such as Clorox usually contain about 5-6% available chlorine, about half that of pool liquid chlorine. Household bleaches often have unwanted fragrances and colors.
There are alternatives to chlorine including bromine, ionizers, and ozonators, though with each you'll still need to use some chlorine. A fourth alternative is PHMB, which doesn't require the use of any chlorine. All four have drawbacks, including cost. Chlorine is relatively cheap.
Pool pumps typically disperse chlorine into the water for you, but it is possible to add chlorine without a pump. The easiest way to do this is with chlorine tablets. They go in a designated floating container and slowly dissolve while floating around the pool. You can also use inline chlorinators.
Short answer--yes. The first response, however, would be why would you use a pool without a filter? The sand filter or other filtration system is essential to the health and safety of the swimmers. It is also necessary to have a circulation pump for maximum chlorination.
Shock-chlorination is an essential and effective method of cleaning the pool. But you need to have the pump circulating the water for this to be effective.
The extra filtering will help clean out the impurities rain has introduced into your pool's water. Pool pumps are made to withstand rain and it is beneficial to run your pump during or after rain.
Shocking your pool isn't necessary, although, it's not a bad idea either. If you get an extremely heavy rain fall, you could shock your pool for good measure. This will help fight off any contaminants that the rain may have brought to your pool.