The best tip to spray kitchen cabinets is a fine finish low-pressure (FFLP) tip, ideally in a 210, 308, 310, or 311 size. These tips provide a narrow 4 to 6-inch fan size and a small orifice that drastically reduces overspray and helps prevent paint runs.
Cabinet paint I like to use a 310-312 FFLP tips. You will need a blue duckbill for those tips. Gallery or like products I use a 308. Richard Goldrich when your pressure is too low, or the tip is wore out, it will produce lines of paint on the outside edges of the spray fan pattern.
A 311 spray tip is best suited for small to medium-sized exterior projects and fine-finish woodworking. It is specifically designed to apply thin, low-viscosity materials like stains, sealers, and polyurethanes, while minimizing overspray.
A 210 spray tip is a specialized fine-finish airless spray tip. The "2" indicates a 4- to 6-inch fan pattern (ideal for narrow surfaces), and the "10" denotes a 0.010-inch fluid orifice (ideal for thin materials). It is typically used for applying stains, lacquers, varnishes, and polyurethanes.
A 515 spray tip is a standard nozzle used in airless paint sprayers, widely favored by both DIYers and professionals. The code breaks down as:
The primary difference between a 517 and 515 spray tip is their orifice (hole) size, which dictates the amount of paint that passes through. Both tips spray a 10-inch wide fan, but the 517 has a larger opening, allowing for faster spraying and heavier material application.
Both the 415 and 515 are standard, mid-range spray tips perfectly suited for latex wall paints, but they differ primarily in their spray fan width.
A 315 spray tip is an airless paint sprayer tip used primarily for painting narrow surfaces and applying medium-viscosity coatings like latex paints, primers, solid stains, and enamels. It creates a 6 to 8-inch fan pattern and features a 0.015-inch fluid hole size.
A 517 airless paint spray tip is used for large-scale painting projects like exterior walls, fences, and ceilings. It applies medium-to-thick coatings—such as latex paints, primers, and solid-color stains—with a wide 10-inch spray fan and an 0.0170.0170.017-inch fluid orifice.
A 209 spray tip is an airless paint sprayer tip used for applying thinner materials like stains, lacquers, and polyurethanes. It is highly effective for smaller, narrow surfaces—such as trim, doors, cabinets, and fencing—due to its narrow spray pattern.
The Reverse-A-Clean (RAC) 310 TC Pro SwitchTip is designed for narrower surfaces and thinner materials like water-based lacquers, stains, and polyurethanes. The 310 TC Pro SwitchTip has a 0.010 inch orifice and produces a 6 to 8 inch fan. Reverse the SwitchTip to easily clear clogs.
Spray Tip Selection
For this type of project, where the surface areas are small, we recommend a spray tip that delivers a smaller spray fan. When spraying water-based enamel and satin finish paint, it's best to use a 311 spray tip as it will deliver a 6-inch spray fan that is perfect for cabinets and smaller doors.
A 213 spray tip is primarily used for precision, narrow-surface painting and coating, featuring a 0.013-inch orifice for thin materials and a 4-to-6-inch fan width. It is ideal for staining, finishing, or painting smaller items like trim, doors, cabinets, and furniture, as well as traffic marking.
Professionals use professional-grade HVLP (High Volume, Low Pressure) or Air-Assisted Airless (AAA) sprayers to achieve a smooth, factory-like finish on kitchen cabinets. These systems maximize paint transfer to the cabinet wood while significantly reducing overspray and material waste.
A 311 spray tip is primarily used with airless paint sprayers to apply thin, low-viscosity materials like stains, sealers, lacquers, and polyurethanes. It outputs a 6-inch fan pattern with a 0.011-inch orifice, making it ideal for narrow, detailed surfaces such as decks, fences, and outdoor furniture.
A 514 spray tip is an airless paint sprayer tip used primarily for fine finish work. It is ideal for applying lacquers, stains, varnishes, enamels, and interior/exterior latex paints smoothly onto cabinets, doors, trim, and walls.
The best tip for spraying cabinets is to use a Fine Finish Low Pressure (FFLP) tip in size 308 or 310. The first digit (3) means a 6-inch fan width, which is perfect for cabinet doors and frames, while the last two digits (08/10) provide a small orifice that lays down a smooth, factory-like finish without wasting paint.
The Reverse-A-Clean (RAC) 312 TC Pro SwitchTip is designed for narrower surfaces and thinner materials like water-based lacquers, stains, and polyurethanes. The 312 TC Pro SwitchTip has a 0.012 inch orifice and produces a 6 to 8 inch fan.
Part Number: FFLP210
Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 210 Fine Finish Low Pressure (FF LP) RAC X SwitchTip. This fine finish tip produces a 4 to 6 inch Fan pattern and has a 0.010 inch orifice, ideal for finishing materials. Reverse the SwitchTip to easily clear clogs.
The main difference between a 515 and a 517 spray tip is the size of the orifice (the hole the paint sprays through). Both tips spray a 10-inch fan, but the 517 has a larger hole, allowing more paint to flow and making it better suited for heavier coatings.
A 315 spray tip is a medium-sized airless paint sprayer tip. The numbers break down as follows:
A 623 spray tip is a high-volume, airless spray tip with a 12–14 inch fan width and a 0.023-inch orifice, commonly used for rapid, large-surface coating projects such as residential, commercial, and industrial painting, drywall finishing, and heavy coatings. It works well with heavy water-base, thin alkyd traffic paints, and lacquers.
415 Tips are most commonly used with: Acrylics. Varnishes. Polyurethanes.
The 317 SwitchTip has a 0.017 inch orifice and produces a 6 to 8 inch fan. Reverse the SwitchTip to easily clear clogs. Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics.
The Reverse-A-Clean (RAC) 419 LineLazer RAC 5 SwitchTip has a 0.019 inch orifice and produces a 4 to 8 inch line. Used for parking lots, roads, warehouse floors, crosswalks and athletic fields. Best used with materials ranging from heavy waterbase to thin alkyd traffic paints.