Vinegar and Borax Borax is a great cleaning product that, when combined with vinegar, can successfully eliminate hard water and mineral deposits. You can use this combination in your toilet and most other plumbing fixtures, too.
Soaking the bowl with white vinegar or lemon juice, then scrubbing with baking soda or a pumice stone can help lift those stains.
First, flush the toilet and then pour a quarter of a cup of Borax into it, using your toilet brush to swish it around. Next, add one to two cups of vinegar and let the mixture sit for 20-30 minutes. You should be able to scrub the stains away and flush the toilet to reveal a fresh, and clean bowl.
White vinegar
The mild acid can dissolve limescale and disinfect. All you need to do is pour a generous amount of white vinegar down your toilet bowl, let it soak in overnight, then scrub with a brush. Then flush to rinse, and voilà, your toilet is back to its former whiteness!
Lay paper towels on the hard water and soak them with vinegar. Let the vinegar work on the stains for two hours. Remove the paper towels, rinse, and check to see if the stains are still visible. Use a baking soda and water paste to tackle stubborn stains and rinse again.
Bleach only masks the problem—it doesn't get rid of it for good. Instead, try citric acid and a toilet pumice stone for a permanent solution. 🧽✨ Citric acid breaks down those mineral stains, and the pumice stone gently scrubs them away. Say goodbye to those marks for good!
To get rid of these stains, pour roughly three cups of distilled vinegar directly into the bowl and let the vinegar do the work. Using a toilet brush, dip it into the water and scrub around the inner edges of the bowl. Be sure to get underneath the rim of the bowl where buildup is particularly prone to occur.
Use vinegar or another acidic cleaner to clean calcium buildup from your toilet. The acid will break down the mineral deposits so you can brush them away. Be sure to take the necessary safety precautions when working with cleaners. Wear gloves and eyewear and open windows for ventilation.
We recommend using a mixture of ¼ cup of vinegar for every 1 cup of water. This ensures your toilet tank is being disinfected without causing damage, which the use of bleach or chemical cleaners can do.
The 'fizzing' reaction of the baking soda combined with vinegar can also play a part. That fizzing may help to break down the clog into smaller particles, making them easier to flush!
Vinegar and baking soda: Add 1 or 2 cups of vinegar to the toilet bowl along with a few sprinkles of baking soda. Swish the solution around the bowl with your brush for a few minutes and then let it sit for about 15 minutes. Scrub the stains with your brush (or pumice stone).
Our favorite, editor-approved toilet bowl cleaner is the Lysol Power Toilet Bowl Cleaner. It's an easy-to-find cleaner that works great on tough stains, has a clean scent, and lasts for a long time.
Over time your toilet water can cause an unsightly rainbow of stains and mineral build up in your toilet bowl. CLR Calcium, Lime & Rust Remover helps you flush the filth away. Before you get started, always use gloves and check if CLR is suitable to be applied on the material you are trying to clean.
Colgate® Optic White® Pro Series Whitening Toothpaste can remove up to 15 years of stains, when users brush twice daily for 2 weeks.
Citric acid
Simply pour a kettle of almost boiling water into the bowl, follow up with 250ml of citric acid, and leave it for some hours – preferably overnight.
Who knew that dishwasher tablets could help keep your toilet sparkling clean? Just drop a dishwasher tablet in toilet bowl and let it sit for 10-15 minutes. Then, use a toilet brush to scrub the bowl and flush it. The tablet will help to break down any stains or buildup in the bowl, leaving it fresh and clean.
To remove black stains from a toilet bowl, start by soaking up the water at the bottom of the bowl using a cloth. Prepare a vinegar and borax or baking soda paste and apply it all over the stains. Wait for about 30 minutes and scrub off the stains using a toilet brush.
Pour in vinegar: Measure one cup of vinegar and pour it around the inside of the toilet bowl, making sure to cover the hard water stains with vinegar. Swish it around with a toilet brush and let it sit for a minute. Add baking soda: After letting the vinegar sit, sprinkle a cup of baking soda around the toilet bowl.
If CLR Grease & Oil Remover is left on a surface for too long it begins to dry and can be very difficult to remove.
So, which one should you go for? It really depends on what kind of cleaning you need to do. If you're dealing with really tough, built-up mineral deposits, especially in your bathroom or kitchen, CLR might be the way to go. It's strong enough to handle stains that vinegar might struggle with.