The best way to get rid of stubborn limescale deposits is by soaking the affected area in lemon juice or white vinegar. Some fixtures may be harder to clean than others, so we've put together a step-by-step guide to help you achieve scale-free taps, showerheads and plugholes.
White vinegar
The mild acid can dissolve limescale and disinfect. All you need to do is pour a generous amount of white vinegar down your toilet bowl, let it soak in overnight, then scrub with a brush. Then flush to rinse, and voilà, your toilet is back to its former whiteness!
HG limescale remover concentrate is the ideal strong limescale remover for removing stubborn limescale. This heavy duty limescale remover also removes rust and urine stains as well as verdigris.
Removing limescale with vinegar
The best method is to soak a cotton cloth or microfiber cloth in vinegar or citric acid, then rub it on surfaces affected by limescale, such as fittings. Leave it to work for some time or overnight, then rinse thoroughly with clean, cold water. Lastly dry everything with a clean cloth.
Lemon juice and vinegar are both acidic, meaning that they can break down the calcium carbonate that limescale is made from. Here's how you can use these green cleaners to your advantage. It's worth noting that we're talking about distilled white vinegar here, not malt vinegar.
Viakal Classic Limescale Remover Spray is your number one against limescale ally: it quickly eliminates limescale and hard water marks, together with the dirt and bacteria trapped inside of them.
You can also spray WD 40 in the bathroom or sink to deal with the same issue. It will get rid of hard water stains and limescale and make your toilet look much brighter.
Pour Vinegar Into The Toilet: It may sound strange, but vinegar is a great solution for limescale because of its acidic chemical properties that eat away at calcified limescale. Make sure to coat the entire bowl and any surfaces affected by vinegar.
#1 White Vinegar
White vinegar is the best CLR substitute. It's great for the environment and it's super effective at breaking down rust and limescale.
Vinegar essence is therefore a better choice for harder-to-treat limescale – but it should always be diluted with water. Always wear gloves when cleaning with vinegar to protect your skin from the acid. A special tip: Coca Cola – this fizzy drink contains phosphoric acid which also removes limescale and urine scale.
Both vinegar and lemon juice will do a great job of removing any limescale deposits and freshening up your machines' innards at the same time. In a washing machine, use a large cup of either liquid in place of your usual detergent and run a normal washing cycle (without clothes).
Limescale can be easily dissolved using a mild acid solution, such as diluted white vinegar. For example, when descaling a kettle, simply fill the kettle with equal parts vinegar and water and leave for an hour before boiling and then letting stand for another 20 minutes.
White Vinegar and warm water – areas of limescale on your tap can be cleaned with a solution of equal parts white vinegar and warm water. Depending on how stubborn the limescale is you may only need to wipe the tap over with the solution or you may need to lay a cloth to soak on it for a few hours.
The best way to get rid of stubborn limescale deposits is by soaking the affected area in lemon juice or white vinegar. Some fixtures may be harder to clean than others, so we've put together a step-by-step guide to help you achieve scale-free taps, showerheads and plugholes.
Final Verdict. The best overall hard water stain remover is CLR Brilliant Bath Foaming Action Cleaner.
1) Acetic acid
Vinegar is just dilute acetic acid, so it's readily available around the home. Mix half a cup of water and half a cup of white vinegar (not malt vinegar) to remove limescale from an electric kettle. Bring the mixture to the boil and leave overnight.
The acidic values of vinegar allow it to soften limescale and prepare it for scrubbing clean. Pour undiluted white vinegar into your toilet bowl, making sure you get it up under the rim where limescale often gathers and cover every part of the surface. Leave it for three to four hours and then scrub it with a brush.
In this case, a basic toilet cleaning product may not be enough, and you will need to use undiluted bleach. As a one-stop cleaning solution, pour one cup of bleach around the bowl. Then tackle every inch with a toilet brush or a handheld scrub brush. Let it sit for five minutes, then flush.
Vinegar is a great natural cleaner for eliminating hard water build-up because its acidity breaks down the deposits, says Jennifer Parnell, co-founder of Humble Suds. Use it to remove any hard water stains on glass surfaces, like mirrors and shower doors. Mix a solution of 1 cup water and 1 cup vinegar.
Acetone is a powerful descaler but is also very harmful to health and the environment. It should therefore only be used as a last resort. Soak a cloth in acetone then wipe it onto your surface. Leave to work for several minutes then rinse.