The GWP for R-134a refrigerant is 1,430, making it 1,430 times more harmful than carbon dioxide when released into the atmosphere. There are three refrigerants that can be used to replace R-134a: R-1234yf, R-152a, and R-744.
A High-Performing Alternative to R-134a
Opteon™ XL10 (R-1234yf) refrigerant is a non-ozone depleting (ODP) hydrofluoroolefin (HFO) option that meets the industry's growing demands for sustainable, safe, and effective solutions.
R515B—As of February 2020, Honeywell has developed a new R134a replacement called Solstice N15, or R515B. It's a non-flammable A1 refrigerant that's a blend of R227ea and R1234ze, with a GWP a little under 293 with similar efficiency outputs as R134a.
A Next-Generation R-134a Refrigerant Alternative
Opteon™ XP10 (R-513A) refrigerant is a non-ozone depleting potential (ODP), low global warming potential (GWP) hydrofluoroolefin (HFO) based replacement for R-134a.
No, you would not replace R134a with R-1234yf for any real reason.
Still, the answer is an emphatic, “No.” Not only would a retrofit of this type negate the environmental benefits of R-1234yf, but it would also be a violation of Federal Law under Section 203 of the Clean Air Act: “tampering” with a vehicle's emissions control device.
The commonly used synthetic refrigerants such as R134a, R407C and R410A have a GWP value higher than 2,500. As a result, their production is being phased out.
With the scientific approach to reduce the global warming potential (GWP) of the refrigerant R-134A (i.e. 1430), the refrigerant R-513A with GWP of 631 is the drop-in replacement.
In the United States, vehicles produced after 2021 no longer contain R-134A in the air conditioning system. In other parts of the world, including the United States, there are restrictions around using 1,1,1,2-tetrafluoroethane. Specifically, in California, retailers can deny selling customers canned R-134a.
No, the compressor will fail. These two refrigerants have very different properties. One of R22 and R134a is high pressure and the other is low pressure. They don't mix chemically and don't have the same boiling point, leading to inefficiencies and eventual compressor failure.
R-404a, R-507 as well as R-134a, which is mainly used in vehicles, also have high GWP values (3,920, 3,985 and 1,430, respectively). R-134a was banned years ago from air-conditioning systems in new passenger cars since it escapes relatively easily from those types of systems.
R-1234yf systems that control freeze protection by pressure may encounter loss of cooling performance if charged with 100% R-134a. This is due to the requirement of R-134a to have a lower setting of 3.3 psig to achieve freeze protection at 32 F. This may result in a 4-degree F.
The test results conclude that the blend R134a/R32 at a mass fraction of 85/15 can be a drop-in replacement for R134a refrigerant.
R-1234yf refrigerant. To date, most auto manufacturers are using the hydro fluoro olefin (HFO) refrigerant R-1234yf as the replacement of choice for R134a.
According to its manufacturer, Chemours, use of R-1234yf has grown so much since the refrigerant replaced the long-established R-134a that it's now used in 95% of new cars sold in the U.S. An estimated 220 million cars on global roads are also using it.
“ R-1234yf is an even more environmentally-friendly gas than R-134a and has been making its way into some cars since 2013. MOTOR Selectline.
Small cans of non-exempt MVAC refrigerant (i.e., containers designed to hold two pounds or less of refrigerant) that have unique fittings, and self-sealing valves can continue to be sold to persons without certification for DIY use on their vehicles.
While R-1234yf could be the perfect replacement for R-134a, there is one major challenge with this new technology. The R-1234yf is much more reactive than R-134a.
Possible alternatives to R-134a
Attention is increasingly focused on low-GWP refrigerants that are hydrofluoroolefins (HFO). R-1234yf in particular is often seen as a possible alternative to R-134a. The GWP value of R-1234yf is 4, which means it has a very low global warming potential.
As part of global efforts to reduce the environmental impact of refrigerants, R134a will be phased out by 2025 in favor of more eco-friendly alternatives like R290 and R1234yf12.
The chemical stabilities of copper, steel, and aluminum have been tested and confirmed as acceptable for use with Freon™ 134a and lubricants. Acceptable plastics and elastomers have been found for use with existing CFC refrigerants.
Comparing the heat pump performance of the several operating refrigerants, it was found that R134a provides the most practical replacement for R22, specifically for low-temperature situations [43] .
The GWP for R-134a refrigerant is 1,430, making it 1,430 times more harmful than carbon dioxide when released into the atmosphere. There are three refrigerants that can be used to replace R-134a: R-1234yf, R-152a, and R-744.
New Restrictions imposed by EPA as part of AIM Act: The AIM Act is a Federal nationwide rule phasing out the use of global warming materials. As part of that effort, EPA is now banning the use of 134a in aerosol products as of 1/1/2025. There are excepted products that are allowed to use 134a until 1/1/2028.
R-454B is the new refrigerant in 2024. By 2025, the EPA's required phaseout of R-410A will be in full effect, with production, importation, and distribution no longer allowed. HVACR businesses must be evaluating their current choices in coolant and ready to make the jump.