The replacements for R-410A are the two A2Ls, Forane® R-32 and
RS-53 (R470A) has been developed to replace R410A in existing installations, although it can also be used in new equipment.
R32, R452B, and R454B replacements for R410A are all classed as 2L: mildly flammable. These A2L refrigerants offer only moderate limitations in charge for direct expansion systems and no limitations for indirect expansion systems such as chillers, when located outdoor or in technical rooms.
You cannot just switch refrigerants because R410-A and R-22 have different chemical properties. R410-A operates at a higher pressure. If you put R410-A into an R-22 system, the parts will rupture due to the increased force.
410 will not work with a r134 system.
R-410A refrigerant is a blend of hydrofluorocarbon (HFC) compounds R-32 and R-125. It has been used as a replacement for R-22 (commonly known as Freon).
The restriction of HFC-134a will occur under a broader prohibition of any substances with a Global Warming Potential (GWP) higher than 150 in the MVAC sector. HFC-134a will no longer be allowed in nonroad vehicles as of January 1, 2028.
No. R32 is not suitable as a drop-in replacement for R410A and must only be used in systems specifically designed for R32.
Since R410A refrigerant is charged under higher pressure, charging an R22 system with it will increase the force within the coolant lines. The pressure can become high enough for parts of the system to rupture. At the very least, leaks will occur. Mixing refrigerants is not an option either.
How much will an R-22 to R-410A conversion cost? The actual cost will depend on many things, including where you live, but most of the time R-22 conversions start at around $2,000 and go up from there. The higher end of that range is somewhere around $4,500 to $4,600.
In December 2022, the EPA unveiled a refrigerant ban that will go into effect between 2025 and 2026 (depending on the industry). The result? R-410A is out, shaking up the HVACR industry, which relies heavily on this refrigerant.
This hydrofluorocarbon (HFC) refrigerant is compatible with polyolefin (POE) oils and replaces R-22 in positive displacement air conditioning (AC) and heat pump systems for residential and light commercial use.
Unfortunately, new research has shown that this refrigerant contains a significant amount of a substance known to lead to climate change. To combat this, in September 2021 the EPA put out its specific strategy to significantly limit R-410A use.
To retrofit an R-22 system with R-410A system your line set must not be more than 25-50 feet in total distance. If the line set is longer than this, you will have to replace the line set with larger lines.
R-454B is NOT a drop-in replacement for R-410A.
Cooling systems shifting from R-410a to newer refrigerants like R-454B refrigerant and R-32 refrigerant will be implemented in 2025. These new coolants are engineered to be friendlier to the environment and meet updated regulations about global warming.
The replacements for R-410A are the two A2Ls, Forane® R-32 and R-454B. Forane® R-32 can be used in new equipment designed specifically for mildly flammable refrigerants as a replacement for R-410A equipment.
If you use R-22 in the same system as R-410a, the compressor is going to be trying to work two different fluids through the same coils as both refrigerants respond differently to different mechanical situations. As you might imagine, this isn't going to go well for your air conditioner or heat pump.
An environmentally more benign refrigerant for replacing refrigerant R410A includes a majority portion of refrigerant R32 and a minority portion of refrigerant R134a, the volumetric capacity of the replacement refrigerant permitting it to be used as a near or exact drop-in replacement for refrigerant R410A in terms of ...
What is the replacement for R-410A? A lower GWP replacement for R-410A is Forane® R-32. Forane® 32 is a stand-alone third generation refrigerant for new residential and light commercial air conditioning systems, heat pumps and other HVAC applications.
R-410A PHASE-DOWN TIMELINE
We will reach a 70% decrease by 2029. In 2034, we will see 80% less R-410A being produced than it is today, and the phase-down will end in 2036 with another 5% reduction.
Changes to the Dangerous Goods Legislation, effective in 2021, has new categories for A2L refrigerants. R32 is a synthetic greenhouse gas. If released to the atmosphere it can contribute to climate change. R32 is a flammable refrigerant.
Why Is R-134A Being Phased Out? When Is the Phaseout Expected to Conclude? Like a lot of '90s relics, R-134A has not aged well. It was known then that 1,1,1,2-tetrafluoroethane could potentially contribute to acid rain and that its ozone layer depletion potential was high.
R-454B is the new refrigerant in 2024. By 2025, the EPA's required phaseout of R-410A will be in full effect, with production, importation, and distribution no longer allowed. HVACR businesses must be evaluating their current choices in coolant and ready to make the jump.
Still, the answer is an emphatic, “No.” Not only would a retrofit of this type negate the environmental benefits of R-1234yf, but it would also be a violation of Federal Law under Section 203 of the Clean Air Act: “tampering” with a vehicle's emissions control device.