Use 1/4-inch to 3/8-inch (6mm to 9mm) exterior-grade plywood (such as AC or BC grade) or an approved underlayment panel like SurePly Premium Plywood Underlayment as your base. These provide the rigid, smooth, and moisture-resistant surface required to ensure your LVT flooring doesn't telegraph imperfections and adheres properly.
What Type of Plywood Should You Use Under Vinyl Flooring?
The best underlayment for Luxury Vinyl Tile (LVT) depends on your LVT's construction. For click-lock LVT without an attached pad, dense options like high-density foam or cork are best. If your LVT already has a pre-attached pad or is a glue-down variety, an independent moisture barrier or acoustic underlayment is generally recommended.
Subfloor preparation is key when laying LVT flooring. Use either a latex screed over a solid, concrete floor, or flooring grade plywood, with a minimum of 6mm.
LVT flooring benefits from soft, moisture-resistant underlay like foam or cork. Foam underlay provides cushioning and noise reduction, while cork is a sustainable option that offers insulation. If installing over concrete, choose an underlay with a built-in vapour barrier for added moisture protection.
Yes, you can install Luxury Vinyl Plank (LVP) directly over plywood. However, because LVP is flexible and conforms to the shape of the surface beneath it, proper preparation is essential to prevent bumps, squeaks, or separated seams.
Thicker isn't always better when it comes to LVP underlayment. Many manufacturers specify a maximum thickness (often around 1.5mm–2mm) to ensure the floor's locking system remains tight and stable. Too much cushion can cause joint separation over time. 1mm–1.5mm: Best for floors with pre-attached padding.
Laying LVT flooring on floorboards
You can also lay LVT on floorboards, too. Part of the subfloor preparation includes putting a plywood layer of 5.5 mm (1/4 inch) on top of the subfloor before installing luxury vinyl.
1/2" plywood is too thin for most subfloor applications and will flex or sag, especially if joist spacing is 16 inches or more. This can lead to squeaky floors and structural issues. -> The minimum recommended is 5/8" plywood, but 3/4" is preferred for strength and long-term durability.
The simple answer is that you won't usually need any underlay with luxury vinyl tiles, making it one less expense, and one less thing to worry about; that's because LVT is fixed directly to a firm base, known as the subfloor, using an adhesive.
15 Mistakes to Avoid When Installing Glue Down Vinyl Plank Flooring
Luxury Vinyl Plank (LVP) does not always require an underlayment. It depends on whether your specific LVP has a pre-attached backing and the condition of your subfloor.
To keep luxury vinyl plank (LVP) flooring in top condition, avoid steam mops, high-heat cleaners, abrasive pads, bleach, ammonia, and oil-based cleaners. Do not use wax or varnish, and avoid using rubber-backed rugs, which can discolor the surface. Instead, use a damp mop with a pH-neutral cleaner.
The Different Types of Underlayment
What thickness plywood should I use for a subfloor? The right thickness depends on your floor joist spacing. For joists spaced 16 inches apart, 19/32-inch plywood is the minimum, but 23/32-inch is better. If your joists are 24 inches apart, you should always use 23/32-inch (3/4-inch) plywood for proper support.
For LVT installation, only P4 to P7 flooring-grade chipboard should be used. These boards are designed to handle the loads and provide the structural stability required for resilient flooring. Before laying anything down: Make sure the chipboard is firmly screw-fixed.
The wrong side may have more imperfections, patches, or a rougher texture. When cutting, especially for projects where appearance is important, you'll want to ensure that the right side is facing the direction it will be seen, while the wrong side is hidden or placed on the inside of your project.
Particle Board (Chipboard)
Particleboard is widely used to make furniture, as well as the construction industry as a cheaper alternative to plywood. It's commonly used for shelves, cabinets, and tabletops, as well as subfloors and wall panels.
Installing Luxury Vinyl Plank (LVP) directly over a plywood subfloor is generally a great pairing, but success relies entirely on a flat, rigid foundation. Because vinyl is flexible, it conforms to the surface beneath it. You must prep the plywood by sanding seams, patching divots, and sinking all exposed nails or screws.
What you put under Luxury Vinyl Tile (LVT) depends on your subfloor and whether your specific flooring already has a backing attached.
You can install it yourself without needing to rely on professionals. Read our guide for top tips on laying LVT flooring like a pro to avoid the common mistakes people make when installing vinyl plank flooring.
While LVT (Luxury Vinyl Tile) is a popular and durable choice, it has notable drawbacks. Its primary disadvantages include an inability to be sanded or refinished, a vulnerability to dents and sharp gouges, potential VOC emissions, and a generally lower return on investment compared to natural hardwood.
Short answer: yes, mould can grow under vinyl flooring — but only when moisture gets trapped between the planks and the subfloor. Vinyl itself is non-porous, so the planks don't host mould.
Preparation Mistakes That Lead to LVP Installation Failure
Any uneven spots, old adhesive, or leftover debris from an existing floor can transfer through luxury vinyl or stress the locking system. The result is a floor that moves, clicks, or separates. Moisture conditions matter as well.