The method we use for carpet cleaning is hot water extraction, commonly referred to as steam cleaning. Stanley Steemer's exclusive hot water extraction method removes the toughest, deepest dirt safely and gently. Hot, soft water and a specially formulated cleaning solution are injected deep within the carpet fibers.
We start cleaning by spot treating any areas that need extra attention. Then, we will use our patented carpet cleaning machines to deep clean. These machines pump hot water into your carpet to release any dirt deep within the fibers, then extract the water and remove the dirt.
Stanley Steemer does NOT use steam, it uses ``hot water extraction''.
Absolutely! Hot water extraction is a versatile and safe cleaning method for a variety of carpet types, from synthetic fibers to natural wool. It effectively cleans without the risk of damaging the fibers, making it an ideal choice for both residential and commercial settings.
The best method for commercial carpet cleaning is hot water extraction, also known as steam cleaning. This process involves spraying hot water and detergent onto the carpet, agitating the fibers, and then extracting the solution along with dirt and stains.
Although we offer both approaches, in our opinion, steam cleaning tends to be the better option in most situations. Here's why: It can usually remove ingrained dirt more effectively – particularly stubborn stains that have embedded themselves deep into the fibres.
Professional cleaning can help. By using advanced cleaning technologies, experts can gently lift a carpet's pile again, so that it enjoys a fuller texture and form, just like when you first bought it.
On average, it will take approximately 5 to 10 minutes per room. This time can vary greatly depending on the amount of furniture to be moved, how soiled the carpet is, and any necessary spot removal treatments. Learn more about carpet cleaning.
Prolonged Drying Times
A soaking wet carpet takes an extremely long time to dry. Professionally steam cleaned carpets can take between 12 to 24 hours of drying time. Renting a steam cleaner with only moderate-strength suction power can leave your carpet (and floorboards) wet for up to two days.
The method we use for carpet cleaning is hot water extraction, commonly referred to as steam cleaning. Stanley Steemer's exclusive hot water extraction method removes the toughest, deepest dirt safely and gently. Hot, soft water and a specially formulated cleaning solution are injected deep within the carpet fibers.
Carpet manufacturers typically recommend a weekly surface clean and a deep clean at least once every 12 to 18 months. Hubert Miles, Certified Master Inspector and owner of Patriot Home Inspections in South Carolina, shares why.
Stanley Steemer Odor Out Plus neutralizes offensive odors on contact, and then uses natural bacterial enzymes to eliminate the source.
One factor that greatly impacts the cost of a professional cleaning is the specialized equipment and products being used during the process. These tools are more advanced than your average household vacuum or floor mop—here are some ways they differ: Degree of Cleaning: Professional cleaning processes may vary (ie.
Mix a cup of vinegar (white) with a gallon of warm water. Put the solution in a spray bottle and generously spray it on the carpet. Allow a few minutes to sit to break down the stains, grease, dirt, and dust. Steam clean before the pretreatment solution dries.
Carpet cleaning, while essential for maintaining a clean and fresh living space, can contribute to wear and tear on carpet fibers over time. The vigorous scrubbing and high-pressure cleaning methods used by some carpet cleaning companies can cause damage to the delicate fibers, reducing the carpet's lifespan.
So, where does the dirt go when you steam clean? Actually, it doesn't go anywhere. Instead, the heat and vapour of steam cleaning ensure that all the unwanted substances or stains are fully broken down and easy to get rid of.
The benefits: Hot water extraction, also known as steam cleaning, is the most effective carpet cleaning method for reaching the deepest parts of your carpeting. Dry chem cleaning only reaches the surface of the carpet, whereas steam cleaning penetrates to the deepest layers of your carpeting.
On average, professional carpet cleaning costs $150-$200, says David Steckel, home care expert at Thumbtack. “Carpet cleaning services may charge anywhere from $89-$109 on the low end and $300-$400 on the high end,” Steckel says.
Best practices for safety after carpet cleaning
To ensure your safety and comfort after carpet treatment, it's important to follow a few best practices. First, allow sufficient drying time, ideally, wait at least 6 to 8 hours before re-entering the room, and aim for 24 hours for complete dryness.
When you have your carpet cleaned, at least some of the factory protector gets stripped away. Maybe not all of it, but enough to make a difference. As a result, your carpet will be less resistant to soil and stains. It will remain somewhat resistant, but not as resistant as it was when it was new.
If you're hiring a professional carpet cleaner near you, it's not necessary or expected to give them a tip. However, if they're prompt, courteous, do a wonderful job, or exceed expectations by doing extra work at no charge, it's a nice gesture to tip them.
The fibers should feel soft and smell fresh. A clean carpet will also not have any signs of stains, mud, or contaminants. Clean carpets feel lighter and fluffier in hand once completely dry. In other words, a professionally well-cleaned carpet will feel as good as new.
Too Much Moisture
Moisture often causes carpet buckling after cleaning. Wet carpets—from cleaning or spills—allow water to soak into the fibers, making them expand.