Shocking is the process in which you overload your pool with chlorine (3-5 times the normal amount) to improve your pool's cleanliness and kill off organic matter. Many pool experts choose to use granular pool shock in saltwater systems as it works best and is easy to use.
Should you add shock to a salt water pool? It's absolutely okay to shock your salt water pool, and is actually pretty important! ... Running your pool's super-chlorinate feature too often is hard on the motor and will cause it to wear out faster.
Shock your pool once a week with Salinity Surge Shock or Salinity Oxidizing Shock. Pool shock works as an added defense against bacteria and contaminants. With Oxidizing shock, you can use your pool after just 15 minutes!
Salt water pools are most stable with a pH of 7.6, and Alkalinity of 70-80 ppm. A stabilizer level of 50-80 ppm is recommended by most salt system manufacturers. High calcium hardness levels have no effect on salt water pools, but a level of 180-200 ppm may result in less scale on the salt cell plates.
The only time that it is important not to add salt is in the first 30 days after plaster is applied. Otherwise it is fine to go ahead and add salt. Run the pump for 24 hours after adding salt and turn off the SWG for those 24 hours.
Clorox Pool&Spa Salt Pool Shock-Oxidizer is ideal to keep your salt pool balanced without adding chlorine. This chlorine-free shock works fast to clarify pool water and reduce odors and swimmer skin and eye irritation. It can also be used in traditional pools.
Yes, a salt water pool has a reduced cost of operation as compared to a traditional chlorinated pool. This cost savings is primarily because chlorine is generated from salt and there is no need to buy chlorine. Additionally, salt water pools require fewer chemicals to keep the water clean and clear.
You definitely need to drain some water from the pool when salinity reaches a 6,000 ppm level. Most salt water pools should be maintained with a salinity level of 2,500-4,000 ppm. The amount you drain depends on how elevated salinity levels are.
If using 6% liquid chlorine bleach, add 5 gallons per 10000 gallons. Add the Shock: With the filter system running, and the pH on the low side, 7.2-7.4, add the chlorine (granular or liquid) slowly to the pool, dispersing it around the pool edge, or broadcasting the pool shock over the surface.
To get rid of cloudiness, you will have to do a liquid chlorine shock to raise the level of free chlorine (since the chlorine produced by the generator is not enough; a chlorine generator just assists you in maintaining the level of free chlorine).
Dichloroisocyanuric Acid: Also known as “dichlor,” this is another type of chlorine shock. Dichlor contains both chlorine and cyanuric acid and will, over time, raise your cyanuric acid levels.
You cannot overshock a swimming pool or add too much. Adding too much shock or overshocking your pool will kill off algae. The negative of adding too much shock is it will upset the chemical balance of your pool.
Chlorine is a sanitizer, and (unless you use Baquacil products) is necessary for maintaining a clear and healthy pool. Shock is chlorine, in a high dose, meant to shock your pool and raise the chlorine level quickly.
As shocking has a tendency to push metals out of solution and salt (even when labeled as pure) can contain trace amounts of metals, it is recommended that you add salt at a different time from shocking.
Calcium Hypochlorite (Cal Hypo) is a calcium-based granular chlorinated shock that can be used as a maintenance or treatment product.
Shock also helps to raise the free available chlorine level of your swimming pool. How do you raise the free chlorine in a salt-water pool? You can use granular shock or shock pods in your saltwater pool. Just make sure that you use your long-handled pool brush to disperse any shock that settles to the bottom.
The salt cell generators are made to work when pool water temperatures are above 60 degrees. In pool water temperatures that are 60 degrees or below, the salt generators simply shut down and by design do not allow the salt cell to ionize (breakdown) the salt and convert it to chlorine.
Winterizing is an important step whether you own a salt water pool or a regular chlorine pool and will help make spring start up a whole lot easier as well as reduce the time and chemicals needed to get your pool ready.
Is a salt water pool better than a chlorine pool? In our professional opinion, YES! Salt water pools are generally lower in chlorine. The chlorine found in saltwater pools are naturally produced from salt, rather than adding harsh liquid chlorine (a.k.a bleach).
Saltwater pools can definitely be heated just like freshwater pools. The saltwater chlorinator does not affect heating units, so you will not have to worry about this when installing a heater in your swimming pool. The heating units will also be set up and installed in the same way as in chlorine pools.
Saltwater Pools Come With Health and Environmental Concerns
Providers have also linked higher heart mortality risks to sodium absorption through the skin, particularly among people with: High blood pressure.