When selecting, or designing, a base cabinet for your new farmhouse sink, it is important that the size of the base cabinet is correct. Your base cabinet should measure 3" longer in length than the sink you are installing. For example, if you have a base cabinet that measures 36" wide it will support a 33" sink.
No matter what you do, you will most likely need a special or custom cabinet to accommodate your new farmhouse or apron sink. This is because there are many styles of sink designs and how they need to be installed, typically requires a non-standard cabinet. The two most common types are Drop-in or Undermount.
They, therefore, require a special cabinet configuration, but it's entirely possible to convert an existing drop-in setup to accommodate a farmhouse sink. You'll want to choose a sink that is a few inches smaller in width than the cabinet so that there is cabinet trim on either side of the sink.
Consider the size of the sink. The base cabinet should be wide enough to accommodate the sink, with additional space on either side for plumbing and dish soap. It should also be deep enough to prevent water from spilling out onto the floor. Think about the type of material you want the cabinet to be made of.
It is recommended that your base cabinet be 3 inches larger than the size of the farmhouse sink you are considering to install.
When selecting, or designing, a base cabinet for your new farmhouse sink, it is important that the size of the base cabinet is correct. Your base cabinet should measure 3" longer in length than the sink you are installing. For example, if you have a base cabinet that measures 36" wide it will support a 33" sink.
To make space for the extra-large sink, you'll need an 'apron-skirt' cabinet design. A farmhouse sink can't fit into the usual drop-in sink space and extends over the top quarter of the lower cabinet. This requires a full re-design of the cabinet and countertop where your farmhouse sink is installed.
To determine the maximum sink size for your base cabinet, measure the interior of your cabinet and subtract two to three inches from each dimension. A 36″ base cabinet can handle a 33″ sink at most; a 30″ cabinet should be fitted with a sink no larger than 27″ wide.
Measure the opening width under your existing sink (or where the new one will be installed) from left to right. This measurement is your cabinet size. Then, allow at least 2-3 inches on both sides for mounting hardware. For example, a 36" cabinet can accomodate a 30-32" sink.
Standard sink base cabinet dimensions range from 30 to 42 inches wide. 30 inches is the standard single basin sink base width. 33 inches is the typical double-basin, offset sink cabinet size. 36 inches is the standard double-basin sink cabinet dimension.
Both types of sinks are huge, large, and quite deep. However, the apron sink's front area is exposed and visible- which is why they are called apron sinks. These are versatile and modern houses prefer apron sinks. But on the other side, farmhouse sinks look adjacent as well as covered by the kitchen cabinets.
Step 6: Add Support to Cabinets
Because farmhouse sinks are pretty heavy, you'll need to add support to the inside of the cabinet to be able to hold the weight. You can do this by adding two two-by-four pieces of wood to the sides horizontally.
Yes and no, there is a specific cabinet for farmhouse sinks. However, a standard sink base cabinet can be modified to fit a farmhouse sink. If you are using a standard sink base cabinet, the top half of the cabinet will have to be cut out, and the doors will have to be modified.
A farmhouse sink needs supports attached to the inside of the cabinet because it's heavy. Some can weigh over 300 pounds when filled with water. The top of the sink needs to be even with the cabinets so the counter will sit correctly.
If there isn't enough width available in the cabinet, you won't be able to go for the bigger sink, even if there is room on the counter. Also, remember that you are going to have to create a larger hole in the counter to suit the new sink.
Measure the opening width under your existing sink (or where the new one will be installed) from left to right. This measurement is your cabinet size. Then, allow at least 2-3 inches on both sides for mounting hardware. For example, a 36" cabinet can accomodate a 30-32" sink.
A 33" sink will undermount into a 33" cabinet if you strap or harness, not clip or block, the sink in place. Disregard the sink manufacturer's instructions please; I've done this hundreds of times.It is not a difficult process at all.
Most base cabinets come in widths that accommodate the standard kitchen sink sizes. A 30-inch wide or a 36-inch wide cabinet are most common. The height of the cabinet can be customized, but 36 inches is average. A typical 33 x 22-inch sink will fill a 36-inch base cabinet.
A 33" cabinet will only fit a 30" sink.
Most Popular By Configuration. Single basin, apron/farmhouse, workstation, and double basin kitchen sinks are the most popular sink styles for the upcoming years.
But what actually makes a sink considered “farmhouse” style? The TLDR definition of a farmhouse sink is “a deep sink that has an exposed front-facing side.” Thesaurus may also refer to it as an “apron front” sink – which, in our opinion, is the best description as it literally acts like an apron as you wash.
A 36" sink will fit into a 36" cabinet easily if you strap it in place. Manufacturer's allow for chubby plumber fingers to access clips to tighten.
The most common countertop overhang is 1.5″. We wanted our sink to go about 1/2″ past the countertop, so we positioned our sink so that it would go 2″ past the cabinet face frame/front of the cabinet.