Interior trim is the part of the window that covers the bit where it meets the wall. It has a decorative appearance and hides any untidiness from the installation process. It also acts as an insulation as it creates another barrier between the window and the inside of your home—increasing energy efficiency.
The sash is basically the frame that houses the glass. It moves together with the glass, so it's part of the operable window. The trim, on the other hand, is also known as the casing. It's the part that frames out the window opening and adds a decorative touch.
Stool Moulding: Interior trim element that serves as a frame for a window sill or window frame and is usually covered with rabbeting.
Trim is the more general term for the edge material used to cover seams and joints around doors and windows, between floors, and on walls or ceilings. A good example of this is baseboard trim, which is used in almost every home and serves as a natural transition between walls and floors.
Exterior window casings are the moldings that go around your window frames. They are installed outside the house, covering the space between the window frame and wall.
Interior trim is the part of the window that covers the bit where it meets the wall. It has a decorative appearance and hides any untidiness from the installation process. It also acts as an insulation as it creates another barrier between the window and the inside of your home—increasing energy efficiency.
Fascia is a specific type of trim, which is installed just below the roof line. It helps to cover the soffit, and provides a more finished appearance for the roof and eaves of the home. These boards may vary in width, but is generally a slightly wider or thicker version of the same trim used on the rest of the home.
TRIM Context is now called HP TRIM Records Management System software and is based on the ISO standard 15489 for records management.
Fascia, frieze, rake, barge, soffit, boxend and gutters are the most common exterior trim terms you'll hear.
The window casing is the outer layer of your window frame and is often referred to as the finishing touch to window installment. Casing is usually chosen to match the molding around your doors and other windows for a clean, uniform look.
Trim is a general term, often used to describe all types of molding and millwork. Casing is a type of molding, typically used to trim the perimeter of windows and doors. Casing is typically less wide (tall?), but thicker than base molding.
A window recess (or window reveal) is the distance between the surface of a window pane and the the wall that the window is built into. In order to determine whether you will be designing/installing an inside or outside mount, we need to first work out whether the window has a reveal and, if so, how deep it is.
The window will either be flush with the inner wall surface or set back from it, depending on the thickness of the wall. The frame is held in place with nails or screws. Windows in old houses usually have a stone or concrete subsill which sits below the window frame and any wooden sill on the outside of the house.
One more note before you get lost in inspiration: Window manufacturers and window dealers often treat window casing as an optional feature so when you are purchasing new or replacement windows make sure to ask if trim/casing is included in your purchase.
That plastic strip is called glazing bead.
If you are replacing trim on existing windows, remove all of the trim down to the rough opening with a small pry bar. Tip: To avoid damaging your walls when prying off the trim, place a large putty knife between the pry bar and the wall. If you've just installed windows, you're good to go.
Casing is a type of moulding used as trim for the perimeter of windows and doors.
Cassette, headbox, fascia, and pelmet are all terms used in the blinds industry that mean essentially the same thing. These phrases are all used to describe a cover that sits at the top of your roller blind. The purpose of this cover is mainly for aesthetics.
Interior door casing is the term used to describe the trim found around a door opening.
When wondering, “What is the difference between moulding and trim?”, know that trim is generally used around openings such as windows and doors, or at the corners between walls. Whereas moulding is used more for decorative use.
Is there an alternative to the TRIM function for removing spaces in Excel? Yes, you can also use the SUBSTITUTE function or a combination of other text functions like SUBSTITUTE, LEFT, RIGHT, and LEN to remove spaces or perform more complex text manipulations.
The average homeowner spends between $634 and $2,249 to install trim, with most paying around $1,381, depending on the trim length, type, and material.
The common terms for exterior trim include fascia, soffit, cornice, trim board, and window trim.
The average single-story home has about 250 linear feet of fascia boards, which will cost $1,750 to $10,000 to replace. If damage to the fascia is localized because of an event like a storm, you may only need to replace some of the material.
Cutting through the fascia that encloses your muscle compartment releases the severe pressure inside, relieving pain and restoring blood flow.