Trisodium phosphate (TSP) is the strongest option you should use on indoor brick. It also works on exterior brick. Don't use on old brick work as this cleaner packs a punch.
Cemelex contains a high strength Hydrochloric Acid (25%) which means that this is one of the strongest formulations available for brickwork cleaning and descaling. Industrial Hydrochloric Acid is only manufactured up to approximately 36% strength due to the difficulties involved in handling and evaporation.
Vinegar (For Basic or Interior Cleaning): Alternatively, some people skip the dish soap and mix a solution with equal parts vinegar and water, then pour it into a spray bottle. This solution can be surprisingly effective at removing basic stains from brick.
Brick cleaning should only be undertaken by a trained professional. A hydrochloric acid solution is commonly used to remove mortar stains from clay brickwork. Any acid used incorrectly can damage the brick or cause unsightly staining and can be more difficult to repair.
Combine 4 cups of water with 1/2 cup of ammonia and 1/4 cup of dish soap in a cleaning bucket or large spray bottle. Apply the cleaner to the bricks. Scrub with a natural bristle brush. If you're using this cleaner, you're not doing a mild sponge clean.
Sure Klean is #1 choice for masonry cleaning since 1956. Prolong the life of your hard surfaces by repelling water, salt, oil and stains. Erase graffiti and protect surfaces from future graffiti attacks. Remove paint and other coatings.
Clean your bricks with a cleaning solution, or by using undiluted white vinegar. Once you've prepared the surface of the bricks, you can apply a coat of concrete stain. You can adjust it according to the original color of your bricks. You can choose from a wide variety of water-based stains and acid-based ones.
WD-40 may remove paint stuck to brick if applied directly and in large quantities, allowing it to sit on the surface for a few hours.
Mix equal parts vinegar and water and pour into a spray bottle. Spray on the bricks and let is sit for a few minutes. Use a sponge mop to clean the bricks. If the bricks are very dirty, use a nylon-bristled scrub brush and put some elbow grease into the scrubbing.
Mix Dawn and baking soda into a paste to clean detailed brickwork. For old brick, always try the least abrasive method and work your way up. Use a sturdy bristle brush when it comes to fireplace brick cleaning.
Boric acid.
Dip a brush into the boric acid solution, then work the saturated brush into a three-by-three-foot section of the brick surface, using vigorous circular motions to scrub both the bricks and the mortar. Rinse away the boric acid solution from the brick section with a clean rag dipped in warm water.
If you don't have the supplies for the ammonia mixture, you can also use bleach or hydrogen peroxide to remove mold, mildew, and stains. Remove dirt and debris using the broom. Put on safety gear. Pour ½ cup of bleach or hydrogen peroxide in a spray bottle with 3 cups of water.
Here are some options for removing stubborn stains on brick: Mix two tablespoons of borax with four cups of water and one tablespoon of dish soap. Mix ½ cup of ammonia with four cups of water and ¼ cup dish soap.
Brick cleaning acid
If your bricks have become very heavily stained, use undiluted bleach and scrub with an acid brush at the end of a broom handle. When you're done, give the wall a thorough rinse with water. Again, don't leave the bleach on so long it dries out.
Yes, you can add white vinegar and water to a spray bottle and use it to apply the solution to a wall for cleaning purposes. This is a standard method for applying vinegar to brick or other surfaces that need cleaning.
Brick Acid is great for cleaning limescale off bricks but it is awful for many natural stones. It's very common for some builders to recommend using brick acid to clean paving, whether it is for concrete or natural stone but beware you could be doing more damage than good.
You need to scrub the dirty bricks with a mixture of table salt and dish soap. The spreadable paste will work well if you are using a bristle brush. Once you have removed the paste with a washcloth, go on and use a sealant to keep the bricks in tip-top condition.
A professional sealer application can help rejuvenate old brickwork and restore its bright red color. Professional-grade pneumatic spray equipment can ensure efficient and expedient sealing work. Some brick sealants will require multiple coats, while others will protect brickwork with only one layer.
Some people go for using muriatic acid for cleaning the bricks. It is useful for cleaning up cement and mortar in spots where it is not desirable.
Prolonged Building Life
Bricks tend to accumulate moisture and grime more quickly than other materials like a stone because of their porous surface. Algae consequently develop on their surface. If not cleaned, the brick wall loses its structural integrity.
A brick cleaner should be used to clean dirt and muck accumulated on the surface, as all types of brick will get dirty over time. Although dirt and grime will generally come off quite easily if a decent cleaner is used, issues like efflorescence, mortar and cement deposits present problems of their own.