A bathroom vanity is an essential aspect of any bathroom and understanding it's size and dimensions is key to finding the right one for your home. A bathroom vanity has a standard height of 30-36 inches, a depth of 20-21 inches and a wide variety of widths depending on the size of your bathroom.
While most bathroom vanities measure around 17 inches to 24 inches deep, the standard bathroom vanity depth is 21 inches. For smaller bathroom spaces, narrow depth bathroom vanities are available that measure less than 18 inches deep. These shallow vanities allow for foot traffic as well as opening doors and drawers.
While the standard bathroom counter height is generally between 30 and 34 inches, some homeowners may prefer what's called “comfort height” for their vanities. Comfort height vanities tend to be around 36 inches high.
Standard Height: The standard bathroom vanity height has always been 30 to 32 inches. If you aren't the tallest, you should opt for a standard height vanity.
On average, circular or oval sinks range between 16” to 20” wide, while rectangular sinks can be found between 19” and 24” wide and 16” to 23” front to back. In terms of depth, a vanity sink usually ranges between 4” and 8”, though larger sinks may be 10” deep.
Use a deeper sink than 16 inches. This deeper sink will less likely cause splashing and will be more suitable for bathrooms.
The height of the vanity needs to be low enough so that the installed sink height is somewhere between 30 to 36 inches. Since vessel sinks come in many different shapes and heights, some vessel sinks will perfectly fit a standard height cabinet and not be too tall for it.
If you haven't done a bathroom remodel in years, you'll notice that vanities have gotten taller. They used to be around 32″ tall, and now they're 36″ to match the height of kitchen countertops. This additional height looks more modern and offers extra storage space.
A typical height for a bathroom vanity is between 850mm and 900mm. However, this measurement is influenced by the type of basin used.
The standard rough-in height for residential bathroom sinks is 31 inches from the floor to the rim of the sink. Bathroom sinks in compliance with ADA requirements measure 34 inches from the floor to the rim.
Instead, think about the overall size of your new bathroom and plan to install a vanity that will fit comfortably within it. Having a vanity that's too large in a smaller bathroom will make the entire room less functional and comfortable.
Toilet placement
A toilet should have some elbow room between it and another fixture or vanity. The NKBA's recommendation is at least 18″. Codes allow a minimum distance of 15″.
For this reason, bathroom vanities are made slightly shorter to accommodate children. Very small children will probably still need a stool to reach the faucet. But again, that 1-3 inch shorter cabinet height will make everyday routines a lot easier and more comfortable for all ages in your household.
Usually, the bathroom tends to have more limited floor space. The standard height for kitchen cabinets is 34 inches high. Bathroom cabinets come in a little shorter, typically at 31 inches. These cabinets are also shallower, with a standard depth of 21 inches, versus 24 inches for kitchen models.
18inchvanities are a great option for small bathrooms because they offer plenty of storage space without taking up too much room.
Wall Mounted Bathroom Vanities only need to be re-mounted. These vanities do not rest on the ground like a free-standing vanity so you just have to remove it from the wall and then reinstall it at a greater height.
For a single vanity, the most popular widths are 24", 30", 36", 48", and for double vanities the most popular widths are 60" and 72", but start at 48". The standard depth of a vanity is typically around 20", but narrower options are available. The standard vanity height is 32", but ranges from 30" – 36".
A backsplash is a type of countertop that goes behind your bathroom cabinets, sink, or stove. It is essential to get one because it will protect against the water that splashes and spills on the floor. It also helps keep dust, dirt, and grime from being tracked around by wiping down any messes as they happen.
The depth of the sink reduces the force of the water from the faucet. Upon impact, the water can splash around if the sink is shallow.
Due to their simplicity, oval sinks complement countertops of any design and color. Their classic design also makes them easy to pair with almost any bathroom style. They are space-savers, as many of them are designed to fit into small spaces. They have no place for dirt to get trapped, thus are easy to clean.
Stainless steel sinks are popular because they're durable, easy to clean and resist odor and germs.
The stream of water should hit pretty close to the bottom of the sink, rather than the side, to reduce splashing and provide ample space for hand washing. If your sink has a wide, exposed lip, the length of the spout is especially important.
Deciding Between Single and Double Vanities. Double bathroom vanities with tops offer all the benefits of a vanity times two, providing space for two individuals to get ready each morning, less stress about sharing the bathroom, and more convenience and flexibility overall.
The standard vanity size for single vanities is between 36 and 48 inches wide, making them a fantastic option for guest bathrooms and powder rooms.
The standard bathroom vanity depth ranges from 20 to 23 inches, with 21 inches being the average depth of a bathroom vanity. If you have a narrow bathroom layout, you can find shallow-depth vanities that range between 16 and 18 inches.