Increase the thermostat If you are just as comfortable with your thermostat one or two degrees higher than you currently have it set, go ahead and turn it up. Even a one degree difference will have an impact on your energy bill. Many recommend 78 degrees as a good temperature for air conditioners to run efficiently.
The best approach is to set your air conditioner to about 78 degrees (F) when you're not home. This is a number quoted by the Department of Energy because it strikes a good balance between keeping your home comfortable and saving electricity.
You can also reduce your energy costs significantly by raising the temperature while you are at work, away from home, or asleep. For the greatest savings, consider setting your thermostat to: About 78 degrees while you are at home. About 82 degrees while you are sleeping.
1. Leave the Thermostat Alone. Constantly altering the thermostat makes your cooling system work harder, raising energy consumption and causing excessive wear and tear. To boost efficiency, set the temperature at a comfortable level—preferably around 78 degrees F (25 degrees C)—when you're inside the residence.
Set the thermostat as high as comfortably possible during hot weather. The less difference between the indoor and outdoor temperatures, the lower your cooling bill will be. Keep your house warmer when you aren't home during the day, but cooler when you come home at night.
78°F is generally considered a comfortable temperature for most people in a house, especially in warmer months. It balances comfort and energy efficiency.
Your air conditioning system is one of the biggest culprits behind skyrocketing electric bills. When your air filter is dirty, refrigerant levels are low, your thermostat is faulty or you lack proper maintenance, your A/C system can end up using a lot more energy than it should.
This is more of a personal question, as different people feel comfortable at different temperatures. Since 72 degrees is generally agreed upon to be an ideal indoor temperature, most people would probably still feel comfortable setting their AC units slightly higher than this, perhaps at around 75.
Eco or energy-saving mode
This is the ideal mode for users looking to save up on energy bills by toning down the performance of the AC and its compressor. Eco-mode uses less electricity by automatically adjusting the fan speed and temperature, while still maintaining a comfortable level of cooling.
Homeowners may lower the thermostat or use a dehumidifier, which increases energy use for both the dehumidifier and the air conditioner. For optimal efficiency, set your central air system's fan to "auto" mode and use circulating fans in individual rooms for additional air circulation.
One great way to lower energy costs is to avoid cooling an empty house. This is especially true during the middle of the day. If everyone in your household is either at work or school, then turning the temperature to 78-80 degrees will save you a chunk of change when the energy bill arrives.
In short, the 20-degree rule of air conditioning states that you should always keep your AC unit at no more than 20 degrees lower than the outside temperature. It means that, if the outdoor conditions are at 95 degrees, you should set your thermostat at no less than 75 degrees.
On the one hand, keeping a constant temperature can be more energy-efficient in some cases because your HVAC system doesn't have to work as hard switching between temperatures. However, this approach can also lead to wasted energy if you're heating or cooling your home when no one can enjoy it.
Best AC Temperature Settings While You Are Home
As you consider the most comfortable room temperature for your lifestyle and family, keep in mind that for each degree that you set your thermostat above 72 degrees, you can save up to 3% on your energy bill.
AUTO is significantly more energy efficient between the two modes since the fan is only running when your AC is going through its cooling cycle. This takes less power, which is more budget-friendly, with some estimates showing you can save as much as $50 per month just by keeping your AC on AUTO.
Energy Saver recommends setting your air conditioner to 78 degrees when you wake up, 85 degrees during the day, and 82 degrees when you're sleeping to save the most money. Kureczka suggests bumping the temperature up to the highest setting you're comfortable with.
Eco mode puts less strain on a car's engine, resulting in several benefits such as: Improved fuel economy: While the change in fuel economy isn't drastic, your car will use less gas and get more miles per gallon when you use eco mode correctly.
Increase the thermostat
If you are just as comfortable with your thermostat one or two degrees higher than you currently have it set, go ahead and turn it up. Even a one degree difference will have an impact on your energy bill. Many recommend 78 degrees as a good temperature for air conditioners to run efficiently.
For many of us, 70 degrees is the ideal indoor temperature, but when it is close to 100 degrees outside, your AC unit will be working quite hard to meet these expectations. Consider setting your thermostat at 75 degrees to 80 degrees in your home if the outside temperature is approaching triple digits.
If the temperature is set to 74°F but the thermometer shows 78°F, you will have to recalibrate the thermostat to account for this 4-degree deviation. Even with older AC units or furnaces, you might have to recalibrate your thermostat from time to time.
The ideal temperature for your AC depends on several factors. In general, it's recommended to keep your thermostat between 24°C (75°F) and 26°C (78°F) for a good balance between comfort and energy efficiency. Setting your AC lower won't cool the room much more but will make it run harder and cost you more money.
So, is it better to leave your AC on all day? Well, it depends. After all, turning the AC on and off costs more initially. However, leaving your AC on all day consumes more energy and adds wear and tear to your system, which may cost you more money for repairs in the long run.