Default master code is “0000” and default unlock code is “1234” so please make sure you changed these codes as your firs step. You would not want any unexpected visitors on your door. Programming the lock is pretty easy when compared to Kwikset 913 Smartcode Electronic Deadbolt.
The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. The lock is pre-programmed with a default User Code of 1-2-3-4. It is recommended that you delete this code.
Total Key Control
Thanks to the two-cylinder Key Control Deadbolt with SmartKey Security, you can have one master key for all your units and unique keys for all of your tenants.
NuSet Kwikset master keyed single cylinder deadbolt. Master key can open all locks in the system although each lockset has its own unique key. This deadbolt is typically used on a front or back exterior door and is operated with a key from the exterior of the home and a thumb turn from the interior.
No. Without the key number, there is no way for Master Lock to know which key will open your lock. There is not a master key that will open all Master Lock products.
You will hear 3 long beeps after the 5 seconds is completed indicating the lock has been reset. A User Code is used to unlock the door while a Mastercode is a password for making changes to the lock features. Interior of door You will reset your User Code to 1-2-3-4 and Mastercode to 0-0-0-0 when the reset is complete.
On my Smartcode 888, the lock button flashes red with fast beeping sounds for three to four seconds. This is a low battery alert. Please replace you batteries.
The SmartCode Deadbolt with Home Connect Technology featuring Z-Wave 500 Chipset enables the door lock to wirelessly communicate with other devices in home. The lock allows the user through a web enabled device to remotely check the door lock status, lock or unlock the door and receive text or email messages.
1) A programming code enables you to make changes without needing to access the programming button. This is ideal for landlords to allow programming from the outside, without access to the interior program button.
If unsuccessful, the Kwikset button will flash red 3 times and you will hear 3 beeps. Note: If the lock is muted, you will not hear the lock beeping. Delete User Codes:The lock is pre-programmed with a default User Code of 1-2-3-4.
Unlocking from the inside of the door is done manually by turning the thumb turn. Locking and unlocking from the outside can be done automatically by an electric motor. As the last number of a correct code is pressed on the keypad, the electric motor swings into action and retracts the deadbolt.
The factory-set combination is 0-0-0. Push in the button at the bottom of the lock. While holding in the button, turn the dials to your new combination. Once the dials are set to your new combination, release the button.
Any key that operates two or more unique locks can be called a master key. A master key will look like any other key within a master key system. It will be the same size and same basic shape. Only the cuts will differentiate it, unless it is stamped with identifying alphanumeric characters, like “GGM” or “GM” or “A”.
It really depends which Kwikset we're talking about. The older Kwikset locks were terrifically insecure and easily picked with standard picking tools. The newer ones, the "Smartkey" versions claim to be bump-proof and pick proof. But, Mr Locksmith has a nice solution here to breaking the smartKey...
Other videos criticizing Kwikset point out that the lock can be easily compromised using a specialized bypass tool used by locksmiths. This tool was developed specifically because the SmartKey lock is so tough to pick -- locksmiths needed another way to force the lock open for their locked-out customers.
The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open.