Most often homeowners complain about low pressure; however, having high pressure can result in expensive damage. The pressure level can vary, but 60 PSI (pounds per square inch) is recommended for most residential homes. Water pressure should not be higher than 80 PSI.
Normal water pressure is generally between 40 and 60 PSI. Most homeowners prefer something right in the middle around 50 PSI. Once you measure the water pressure in your house, you can adjust it to a setting that is ideal for all family members and household uses.
Normal psi for a home pipe system is between 30 and 80 psi. While you don't want the psi to be too low, it violates code to be above 80. Instead, you should aim for a psi that's between 60 and 70.
Residential water pressure tends to range between 45 and 80 psi (pounds per square inch). Anything below 40 psi is considered low and anything below 30 psi is considered too low; the minimum pressure required by most codes is 20 psi. Pressures above 80 psi are too high.
According to statistics, water pressure above 80 psi (pounds per square inch) causes the failure of water fixtures. The most common signs are spitting or leaking faucets, especially if it's out of the cold tap.
Consider calling a professional if the water pressure reading goes above 80 psi.
If your water pressure seems low, the first step should be to test how much pressure you're actually getting from the shower head. A typical home's water pressure should be somewhere between 45 to 55 psi (pounds per square inch).
Normal water pressure range
In general, residential water pressure ranges between 45-80 psi (pounds per square inch). If your water pressure is under 40 psi, it's considered low. A psi between 20-30 is considered very low, and under the minimum water pressure required by most building codes.
If the pressure of the water entering your house is 100 psi or above, it can damage the plumbing. The pressure will cause dripping faucets and leaks in the pipes. It's also harmful to water-using appliances, such as water heaters, dishwashers, and laundry machines.
Banging or Clanging Noises in Pipes
This is a sign that the pressure in your pipes is already extremely high, and the shuddering is your pipes adapting to the pressure increasing when you turn off the water. This also means that you could find yourself dealing with plumbing leaks within a short period of time.
The ideal water pressure for a house will be somewhere in the range of about 45 to 65 psi. Anything higher than 80 psi can cause damage, and anything much lower than 45 psi may result in issues when you use your shower, toilet, dishwasher and other water-consuming appliances.
50 psi x 144 square inches/square feet / 62.4 pounds/cubic feet yields 115 feet of water height. So you'd need a barrel of water 115 feet high to create 50 psi of water pressure.
As you descend, water pressure increases, and the volume of air in your body decreases. This can cause problems such as sinus pain or a ruptured eardrum. As you ascend, water pressure decreases, and the air in your lungs expands. This can make the air sacs in your lungs rupture and make it hard for you to breathe.
Ways to increase water pressure in your shower
Clean your showerhead. Remove the water restrictor. Replace your shower hose. Check if your water shut-off valve is fully open.
Water pressure over 80 psi can cause damage to your home's plumbing fixtures, including anything with a rubber gasket. Common problem areas include: water heaters.
Pressures above 80 psi are too high. Whereas low water pressure is more of a nuisance than a serious problem (some fixtures, like washing machines, have minimum pressure requirements), high water pressure carries with it a significantly increased risk of damage to pipes, joints, fixtures and seals.
The relationship between PSI and feet of head is that 2.31 feet of head = 1 PSI. Translated, that means that a column of water that's 1-inch square and 2.31 feet tall will weigh 1 pound. Or, one-foot column of water that's 1-inch square weighs .
Find the spigot closest to your source of water. Make sure all the taps and other water uses are turned off in your house. Now turn on the spigot and see how long it takes to fill the bucket. Dividing the number 60 by the time to fill the bucket will give you the gallons per minute number.
The maximum recommended water pressure for homes is 80 psi; any pressurization exceeding this amount will result in thousands of wasted gallons of water each month.
When the water pressure reading reaches 30 psi or lower, you definitely experience water pressure issues in the home. Low water pressure creates the issue of not having enough water supply to comfortably or thoroughly perform tasks, like showering or washing dishes.
High Pressure
Excessive water pressure can cause stress on your plumbing leading to leaks and burst pipes. If you hear banging from your pipes (known as a water hammer) this is a sure sign of high water pressure. It may mean that the water pressure from your supplier to your house is too high.
Water pressure is measured as pounds per square inch (PSI). Normal pressure falls within a range of 20 to 80 PSI. Some customers who normally receive low water pressure (say 20 – 35 PSI) may prefer to have high pressure inside their home.
The water pressure at the site of the Titanic wreck is roughly 6,000 psi (more than 41,000 kilopascals). Under this amount of pressure, even the slightest structural flaw could result in fatal consequences. Death would be virtually instantaneous for the occupants of the pressurised chamber.
Allison Strube, director of water utility for San Angelo, Texas, explained if the pressure in the system drops below 20 PSI, the system becomes vulnerable for bacteria from groundwater or dirt to seep into the pipe and affect the water supply.